i'm waiting for someone from gnome to get back to me.

i believe building it myself is going to be alittle much.

but...i definatly don't have the tools to do it. and chances are i'll never make a box again... so... it wouldn't be worth buying them.

around my area theres only 1 place that will have them built. and they charge about 150 a box

Thats definately way to much for a box. i can make you one for $40 plus shipping and all you have to do is glue, seal it and screw it. and carpet it if you're into that sort of thing...

ok got em

h - 16 at the very max

l- 36.5

w- 15.5

want tuned to 31

and ported...

that gives u only 3.3ft^3 with both subs and a port....

i guess it would work, but i think u need more room...

bb6p shows a flat response even with that size...

ur port would be 2.5" x10" x 18 5/16", to get tuned to 31hz...

that's assuming 3/4 mdf...

wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

i'll remeasure see if i can't squeeze in a couple more inches.

or any suggestions on how to get more space.

damnit... i need to borrow someones eclipse

i measuring the car i have now. to make sure it will fit in that.

and i'm sure it will fit in the clipse. i can add alot more depth but i'm not sure of the depth on the clipse.

i'll remeasure see if i can't squeeze in a couple more inches.

or any suggestions on how to get more space.

damnit... i need to borrow someones eclipse

i measuring the car i have now. to make sure it will fit in that.

and i'm sure it will fit in the clipse. i can add alot more depth but i'm not sure of the depth on the clipse.

u can't find one at a used car lot, maybe?

hmmmm..

lemme know..

wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

how much room would a lower freq. get me?

not enough to make a difference?

:ph34r:

ok... i'm going with the orion h2

so i just need it for one sub tuned to 28hz

and

kj get at me i'd like to talk to you bout that box

ok... i'm going with the orion h2

so i just need it for one sub tuned to 28hz

and

kj get at me i'd like to talk to you bout that box

<{POST_SNAPBACK}>

What?!?! I thought you were gettin the rl-p's? Well, I guess my offer is still up for that box. What time frame are you lookin at? Whats your area code? and if you're wondering why i'll do it so cheap its because it's still fun to me! How would you like to do payment?

preferably paypal or m/o works too.

zip is 45205.

yah... i was gonna go with the rl-ps but an offer of 250 for an orion h2 i couldn't pass it up.

time frame... as soon as you can.

i get my amp friday and the sub monday or tuesday.

but i'm in no hurry i have to run new wire anyway

well... that sounds good. Paypal works for me. If I can't get my hands on software, i'll just have to work out the dimensions with some people on here and ca.com. I'm thinkin shippin it out on monday's not unreasonable. Lookin at about $10 for fed ex ground delivery.

3 day delivery. also, what is the make, model, and year of the car?

well... that sounds good. Paypal works for me. If I can't get my hands on software, i'll just have to work out the dimensions with some people on here and ca.com. I'm thinkin shippin it out on monday's not unreasonable. Lookin at about $10 for fed ex ground delivery.

orion says a 2.25ft^3 box with about 20in^2 of port..

if we go by that.....using 3/4" material..

16"tall x 27.5"long x 16" deep, port is 8" x 2.5" x 28.25" long..

with sub and port displacement..2.3ft^3..u could always throw in a brace or two, dowel rod..to get it down the other .25ft^3..

will that help, or does anyone recommend a different box,port?

wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

its a 94 pontiac sunbird sedan...

but its only going to be in there till summer...

hopefully by then i'll have another h2 and room for a bigger box in my eclipse.

*crosses fingers*

so we're talking like 50-55$?

i'll ask hcaa about box recomendations

yah i'm gonna keep my aprox 3ft^3 with the 30hz tune.

he said something about 30in^2 of port

yah i'm gonna keep my aprox 3ft^3 with the 30hz tune.

he said something about 30in^2 of port

for one h2 or two?

wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

1

1

done...i've got some specs....

16"tall x 37"wide x 17"deep, with a 10"x3" port 22.75" long (rounded up two hundreths), including four 3/4" dowel rod braces...a net volume of 3.558ft^3.

will that work?

if so, i'll email the plans to kjwiehoff to get ur pieces cut out!

this is for one 15" h2, using 3/4 mdf.

hccafan, whatcha think? denim?

i feel like i need to move this topic to fabrication...

wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

one sec i'll go remeasure the depth...

just to make sure

the 17" is scaring me... can we drop half an inch

and everything will be fine.

sorry.... for all the fuss

i really do appreciate all this though

1

<{POST_SNAPBACK}>

done...i've got some specs....

16"tall x 37"wide x 17"deep, with a 10"x3" port 22.75" long (rounded up two hundreths), including four 3/4" dowel rod braces...a net volume of 3.558ft^3.

will that work?

if so, i'll email the plans to kjwiehoff to get ur pieces cut out!

this is for one 15" h2, using 3/4 mdf.

hccafan, whatcha think? denim?

i feel like i need to move this topic to fabrication...

wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

<{POST_SNAPBACK}>

Yes, do email me at [email protected] i have a couple of in depth questions that will be more easily answered there than on here.

yah i'm gonna keep my aprox 3ft^3 with the 30hz tune.

he said something about 30in^2 of port

<{POST_SNAPBACK}>

That box size seems aful big compared to what the reccomend on the site... whats the basis of the decision on the size?

wanted to give it as much room as i could.

but seriously i'm not an expert. or even well educated on these things. so... my basis is probably weak

i think we should give it a fair amount of breathing room. I was thinking like 2.5 or so.... we'll se how it goes.

sure