If you come across some extra motors I will take 2!!!!!!!!!!!!!!!!!!

hey jacob why dont you use a spacer with that basket to increase the travel lenght??

When doing so you actually need to use a spacer AND need to cut out the hole in the bottom of the basket larger (it is just big enough for the 3" coil to go through). I may experiment with that... the basket already has 6.75 mm spacers under it for cooling channels.

Nice! I need 32 sent to my address. Thanks.

Nice! I need 32 sent to my address. Thanks.

*laughs*

If you are serious I may have to do a production run of them.

Other than that... the 10s will likely remain limited special order / if you blow your sub and send your motor back I can build one type thing.

Nice! I need 32 sent to my address. Thanks.

*laughs*

If you are serious I may have to do a production run of them.

Other than that... the 10s will likely remain limited special order / if you blow your sub and send your motor back I can build one type thing.

When are you gonna do another production run anyways?

just curious here, but what the hell is the mounting depth on that beast?

just curious here, but what the hell is the mounting depth on that beast?

Very deep *laughs*

I'll have to measure on Monday

---

Logan,

Not sure... but I will be getting a bunch of extra motors so I can build more customized drivers as custom re-cones have been a big deal so far.

just curious here, but what the hell is the mounting depth on that beast?

Very deep *laughs*

I'll have to measure on Monday

---

Logan,

Not sure... but I will be getting a bunch of extra motors so I can build more customized drivers as custom re-cones have been a big deal so far.

Thats all I wanted to know any how. hehe.

Jacob, How much power can they hold? When can I get 12 of them or do they come in 12's. If not the truck is all ready for 10's..

Robert Wyatt

Team Twisted Mayhem

Team Sundown

Team T3 Audio

Team Masssive

Proud Dad of a MECA Kid

Jacob, How much power can they hold? When can I get 12 of them or do they come in 12's. If not the truck is all ready for 10's..

I have plenty of 12s but not enough motors to build 12 more 10s

You could get 12s whenever you want, it is a Nightshade. The "stock" Nightshades that are in stock now are optimized for 1500 watts.

Not sure if I missed it, but do these require inverted mounting or a spit baffle??? Oh, and did you get a chance to measure it's mounting depth Jake? I use to compete locally in what we refered to as Class A, single 10"/dual 8" setups. In fact both yama168(Myron) and I placed in the top 3 at the last comp we had here. One or even a couple of these would be fun to fool around with!

ALOHA FROM HAWAII,

SKY

Sky,

There is 1/8" clearance from the mounting hole to the motor on each side.

Simply don't have enough motors to build a bunch of them right now.

----------

I cut the hole larger in the bottom of the 4-spoke for more inner spider clearance. I need to figure out an easier way... tried my dremel and that wasn't working, and then finally got it with my jig-saw after breaking the blade off 5 times.

you break out the tape measure on that mounting depth yet Jacob?

you break out the tape measure on that mounting depth yet Jacob?

8 inches.

you break out the tape measure on that mounting depth yet Jacob?

8 inches.

Small subs, lol. I think the TC sounds OEM's are taller. *hey if you still have yours, i'll take them, lol.*

you break out the tape measure on that mounting depth yet Jacob?

8 inches.

Small subs, lol. I think the TC sounds OEM's are taller. *hey if you still have yours, i'll take them, lol.*

Most of theirs is basket depth

I have an SVC 4 ohm here... and a friend of mine has one as well.

you break out the tape measure on that mounting depth yet Jacob?

8 inches.

Small subs, lol. I think the TC sounds OEM's are taller. *hey if you still have yours, i'll take them, lol.*

Most of theirs is basket depth

I have an SVC 4 ohm here... and a friend of mine has one as well.

I think I will stick with your "interesting" nightshades for my next Street A build.

any update on the return of being able to build these little monsters?

any update on the return of being able to build these little monsters?

I have motors being built - they aren't in yet.

Custom Nightshade 10... I am building it for a guy.

May need to build 8 more later for an extreme SPL car to be used with 8x 3000Ds. That car does 159.6 with two 3000s and 8x SI BM 10s

you said 159.6 with ONLY 2 3000s!!!

Custom Nightshade 10... I am building it for a guy.

May need to build 8 more later for an extreme SPL car to be used with 8x 3000Ds. That car does 159.6 with two 3000s and 8x SI BM 10s

you said 159.6 with ONLY 2 3000s!!!

Yes, you are correct - on 12 volts.

This vehicle does have a concrete floor and lexan windows, though!

We expect it to break 170 dB with Nightshades and eight 3000Ds

Hmmm look what I found!? LOL Could you poss. use a similar oversized basket like I have on my current subs? Work well and allow for more excursion and were meant for 9500 series like motors.

At least thats what I was told. LOL I'm no sub builder.

That is one seriously big a$$!!!