Jump to content
View in the app

A better way to browse. Learn more.
SSA® Car Audio Forum

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

I am back to all ZED power in my daily :)

Aaron Clinton
in ZED Audio

Featured Replies

Posted
  • Admin

Giving the Orion's a much needed rest and gaining a ton of space back in my car.

p706 for mids and highs

USA 2075 for sub.

:)

  • Quote
    • 0
    • Author
    • Admin

    Yes, and the sub is wired to 8 ohms mono. :)

  • Quote
    • 0
    • Author
    • Admin

    Believe me with the wiremess due to running out of time and day light, pix would be a bad thing. So with approx gains settings (have to pull out the DMM again since I have adjusted some) total output power being used is sitting at a hair under 300 watts for the entire system. Running off of 4/0. :)

  • Quote
    • 0
    • 1 month later...

    Now that P706 is a beauty....I bet....haha.....I wish I had that one still.....nice amp.....

  • Quote
    • 0
    Believe me with the wiremess due to running out of time and day light, pix would be a bad thing. So with approx gains settings (have to pull out the DMM again since I have adjusted some) total output power being used is sitting at a hair under 300 watts for the entire system. Running off of 4/0. :)

    :stfu:

  • Quote
    • 0
    Believe me with the wiremess due to running out of time and day light, pix would be a bad thing. So with approx gains settings (have to pull out the DMM again since I have adjusted some) total output power being used is sitting at a hair under 300 watts for the entire system. Running off of 4/0. :)

    Remember what was pulled out of the sled...believe me...nothing you could have done would beat that :)

  • Quote
    • 0
    • Author
    • Admin
    Believe me with the wiremess due to running out of time and day light, pix would be a bad thing. So with approx gains settings (have to pull out the DMM again since I have adjusted some) total output power being used is sitting at a hair under 300 watts for the entire system. Running off of 4/0. :)

    Remember what was pulled out of the sled...believe me...nothing you could have done would beat that :)

    Hey now, remember I did not install that, it was the previous owner. :)

  • Quote
    • 0
    • Author
    • Admin
    Now that P706 is a beauty....I bet....haha.....I wish I had that one still.....nice amp.....

    I am considering trying to build glass pods on axis and have the SEAS and maybe the TB Neo 3" drivers for mids and go 3-way front. The Mach5 mids love the p706.

  • Quote
    • 0

    he is gonna wind some coils for the 3'' and parallel it with the seas

  • Quote
    • 0
    • Author
    • Admin
    Aren't you short an input on that amp for that?

    Yes, but would use the crossover on the amp for the mids and mid bass.

  • Quote
    • 0

    Join the conversation

    You can post now and register later. If you have an account, sign in now to post with your account.

    Guest
    Reply to this topic...
    Go to topic listing

    Recently Browsing 0

    • No registered users viewing this page.

    Configure browser push notifications
    Chrome (Android)
    1. Tap the lock icon next to the address bar.
    2. Tap Permissions → Notifications.
    3. Adjust your preference.
    Chrome (Desktop)
    1. Click the padlock icon in the address bar.
    2. Select Site settings.
    3. Find Notifications and adjust your preference.