Jump to content
View in the app

A better way to browse. Learn more.
SSA® Car Audio Forum

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

what can i do with 100.4 until upgrade?

tosh
in Sundown Audio

Featured Replies

Posted

im looking to redo my set up. want to go with all sundown amps this time. will eventually go active or use the 3/4 chanels fo mid bass. after i buy my saz1500 & subs but until then can i use my 1/2 chns to run my comps passive and bridge 3/4 at 2 ohms on a small sub? or does it have to be at 4ohm? and what type of output can i get out of the bridged chns at each ohm load. i going to order the new heatsink model by the way.

Edited by soundjunkie

You are in pretty much the same boat as I am. I currently have a 100.4 and plan on a 1500 in the future (and plan on the 250.2 *cough**cough*Sundown*cough*) but until then, you can run your comps passive and bridge 3/4 for 360W @ 4 ohms for your sub

I'm trying on the 250.2 - I am getting such a surge in demand for existing products that all of my capital is going into more inventory for those items. Also trying to release the 2000D and 50.4 models as well in addition to all kinds of other stuff - working as hard as I can :)

I'm trying on the 250.2 - I am getting such a surge in demand for existing products that all of my capital is going into more inventory for those items. Also trying to release the 2000D and 50.4 models as well in addition to all kinds of other stuff - working as hard as I can :)

My solution to needing a 250.2 was to bridge a 100.4.

  • Author
You are in pretty much the same boat as I am. I currently have a 100.4 and plan on a 1500 in the future (and plan on the 250.2 *cough**cough*Sundown*cough*) but until then, you can run your comps passive and bridge 3/4 for 360W @ 4 ohms for your sub

so i can get 100wt x 2 for my comps and how does the amp do 360wt bridged 3-4?

I'm trying on the 250.2 - I am getting such a surge in demand for existing products that all of my capital is going into more inventory for those items. Also trying to release the 2000D and 50.4 models as well in addition to all kinds of other stuff - working as hard as I can :)

My solution to needing a 250.2 was to bridge a 100.4.

You are a very smart man!

Go to topic listing

Recently Browsing 0

  • No registered users viewing this page.

Configure browser push notifications
Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.