Jump to content
View in the app

A better way to browse. Learn more.

SSA® Car Audio Forum

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Featured Replies

Posted

Bronco_Box_Front.jpg

* Box is three layers thick on the front for amp mounting - but we are still trying to find another place to mount the amps.

Bronco_Box_Rear.jpg

* Huge port!

Bronco_Trophies.jpg

* Brandon's trophies from the show, and our lucky extra dBeez!

Bronco_Roof_Damage.jpg

* Damage to the roof from demoing at the show

Bronco_Roof_Damage2.jpg

* Another view

The deadener is also ripped all around the edges of the perimeter of the roof... little pieces were falling down all day!

What kinda numbers is it putting up! Those 4 15" night shades off 2 3000ds strapped correct?

  • Author
What kinda numbers is it putting up! Those 4 15" night shades off 2 3000ds strapped correct?

Yep.

Did 151 db @ the show, has done 151.9 dB in testing - at the show the driver had to be out of the vehicle.

What kinda numbers is it putting up! Those 4 15" night shades off 2 3000ds strapped correct?

Yep.

Did 151 db @ the show, has done 151.9 dB in testing - at the show the driver had to be out of the vehicle.

Nice numbers!

What's the specs on that box? That port is mamoth, and I know there's not a whole lot of room in the back of those Bronco II's.

  • Author
was that on a fuse pack or just the 300 amp fuses the amps require

Just on amp fusing - he was in the higher MECA classes that don't run limited fusing - X1 and Modex 3 IIRC.

  • Author
What's the specs on that box? That port is mamoth, and I know there's not a whole lot of room in the back of those Bronco II's.

12 cubes after displacement w/ 169 in^2 port area tuned to 35 Hz.

What does it peak at?

What's the specs on that box? That port is mamoth, and I know there's not a whole lot of room in the back of those Bronco II's.

12 cubes after displacement w/ 169 in^2 port area tuned to 35 Hz.

That port looks like it's alot bigger than that. Pretty impressive though. I like :drink40:

thats sex and more sex

80

was that on a fuse pack or just the 300 amp fuses the amps require

Just on amp fusing - he was in the higher MECA classes that don't run limited fusing - X1 and Modex 3 IIRC.

you guys need to build a huge rack of the glass fuses if you can find enough room the more fuses the better

Jacob, I see were you ran in MX3. I seen the score it was a 145.2or3. Very nice score. But didn't see were Brandon ran at all. Todd on Sunday pulled a 145.5 with two SAZ 1500's took Frist place in AS3 and Frist place in DB3 and brought home $50.00 in Prize money.

Jacob, I see were you ran in MX3. I seen the score it was a 145.2or3. Very nice score. But didn't see were Brandon ran at all. Todd on Sunday pulled a 145.5 with two SAZ 1500's took Frist place in AS3 and Frist place in DB3 and brought home $50.00 in Prize money.

still to post RX1 and phat awards from show .Brandon hit a 151.0 Rx1 also phat truck and most improved. Truck sounds 155ish. The whooooole truck breaths including a and b pil and of course Brandon demoed the f#$^ out of it alllllll day.

What does it peak at?

50HZ

Yea i think you would have been in mod 5 without fuses but i think the headliner being out put you in modex instead. Good number and I am sure with some tweaking and getting use to metering at the headrest you could get it allot louder. I think you should definitely start competing in meca and if you wanted to travel you could still qualify for worlds this year.

  • Author
Yea i think you would have been in mod 5 without fuses but i think the headliner being out put you in modex instead. Good number and I am sure with some tweaking and getting use to metering at the headrest you could get it allot louder. I think you should definitely start competing in meca and if you wanted to travel you could still qualify for worlds this year.

We actually just didn't have time to put the headliner back in after welding the roof and deadening it - of course, we have to do all that all over again now *laughs*

If you don't get points though you could still come to worlds and demo and do promotional stuff.

  • Author
If you don't get points though you could still come to worlds and demo and do promotional stuff.

The way Brandon wants to weld up the roof he'll probably be illegal for most classes - demoing is what he really likes to do anyway.

Bronco_Trophies.jpg

* Brandon's trophies from the show, and our lucky extra dBeez!

where the trophies?? i not seeing any trophies..

Hey Jacob, I have an idea for an amp rack for the bronco if you want. Itd what I m gonna do to the 4runner when I get the chance. Good wk btw at the MECA. that bronco is awesome. you all just torture the mess out of it.....and it keeps tickin. I think the roof might just fly off one day

Edited by mytyeerinpie

Recently Browsing 0

  • No registered users viewing this page.

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.