Jump to content
View in the app

A better way to browse. Learn more.
SSA® Car Audio Forum

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

SAE-1000D question

mwoehr
in Sundown Audio

Featured Replies

Posted

I hope this isn't a stupid question. A friend of mine has the SAE-1000D and wants to run it at 2 ohms to power his pair of JL Audio W3v3 13.5s with 600 watts until he has the money to get the electrical upgrades he needs for his car. He bought the amp so he could expand his system when ready. Right now he has a Batcap 800. He eventually wants to get a bigger alternator and 2 good drycell batteries in place of the Batcap and a 2nd SAE-1000D and 2 Icon 15s, but for the time being just wants to use his JLs. How should he treat his gain for the JLs being the amp is going to be ran at 2ohms rather than the amps max at 1ohms?

Edited by Jysoe

what ohms are your W3V3's? if they are the single 4 ohms then it's should be fine just set the gains to match you output voltage.

Go to topic listing

Recently Browsing 0

  • No registered users viewing this page.

Configure browser push notifications
Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.