guess what ?

i scored 94% today

:woot::woot::woot::woot::woot:

and that means....

FREE COLLEGE FOR ME

I too can't say that I have had a very good experience with my truck. Either way before going any further test it by disconnecting your newly attached wires and see if the gauge starts working.

As for the gains being off, if you don't hear distortion don't worry but do beware at higher volume to make sure you don't create issues.

ok, on the wires which end should I disconnect? Like is it safe to leave the + alt. attached and disconnect it from the + battery or should it be the other way around? and on the grounds, should I disconnect from the chassis or from the electrical source? Or should I just take the time to remove them all together?

I'll just keep the volume down until my o-scope arrives to be safe

-John

Have to pull the source side (or the other) so in this case, the pos battery and pos alt.

damn forgot to mention the Q is now housed in a 2.5 @ 28hz box

Mmm, 28hz.

Nice work and Congratulations Adrian!!!

and that means....

FREE COLLEGE FOR ME

:woot:

Nicely done!

Nice work and Congratulations Adrian!!!

thanks

1 year's worth of studying payed off really nice...

Ryan, what's the power rating on the sla 1 ?

8 ohm stereo to be more precise

EDIT :

if it's more than 35W i'm going to say F'it, sell the technics and prepare for a 2496

now i have too much free time.

maybe i'll start reconditioning grandma's old sewing machine...

94% is impressive no matter what the test.

Its 100w.

Its 100w.

weight guesstimate ? condition ? price ?

The weight is listed as 18lbs, condition is great, have factory packaging somewhere to ship it.

The thing is, I'm a little leary to sell it, its my 3rd amp for running 3-way active and it does it nicely but let me look around see what else I can find to replace it. The price would probably be somewhere around the 180 ish mark, but let me get back to you on it.

I have a madisound and PE order in....

Fostex FT17 from madisound and Eminence 12" coax PA drivers and some other toys from PE. Should be an interesting project.

No B&C?

tOp

i scored 94% today

:woot::woot::woot::woot::woot:

damn, you made that test your bitch haha

-John

congrats adrian!

The weight is listed as 18lbs, condition is great, have factory packaging somewhere to ship it.

The thing is, I'm a little leary to sell it, its my 3rd amp for running 3-way active and it does it nicely but let me look around see what else I can find to replace it. The price would probably be somewhere around the 180 ish mark, but let me get back to you on it.

no rush. take your time and i will check to see what options i have in europe around that power.

the phonic max 250 looks tempting and i can try it out before i buy it

hello fellas.

thanks again for the kind comments

i want temperatures below 100, so i can start working on the jeep system

I have a madisound and PE order in....

Fostex FT17 from madisound and Eminence 12" coax PA drivers and some other toys from PE. Should be an interesting project.

what beast are you building ?

i woke up for work 1hr early and didn't realize it till about 5min ago, damn i could have had more sleep

opposite for me. hard as hell to get up today