It's really annoying when you need a bolt and GM doesn't make it anymore and it's so odd that no one else does either

You need better stores, what exactly do you need?

ahh good breakfast

3 half strips of bacon, some hashbrowns with a little cheddar, and two pices of rye/pumpernickel toast

now i need an espresso to top it all off nicely

Yes, espresso. Can't live without that stuff.

tom, the fiero uses something like that ifyou can find one in the local junkyards. the b-pillar attachment has a long ass shoulder and the attachment on the bottom and middle have shorter shoulders.

may work?

Maybe, I guess I just need to go find a junkyard and start looking

Sounds like what the truck uses for seatbelt hold downs as well. I just used an allen head to take mine out though and it was no trouble.

synopsis of the bad in the thread

2 12" ROCKFORDS 4000 WATTS

3 10" ROCKFORDS 1200 WATTS

In a 99 ecsb no back seat. 12's face down. 10's face the front.

^Sean's reply to this is what got him banned

The subs are too close to the flood to "load" properly. If they sat 4-5 inches up, sure, but you still wouldn't be moving the maximum air possible. Thats why people face subs up in SUVs, not down. I promise, you'll never see someone in a competition have subs facing down. Forward, or up, is the way to go in a truck.

I've seen plenty of stereo demo vehicles at the CES and SEMA that have mixed sizes of subs. Different sizes have crossovers for different frequencies, For example you might have you 12" subs on a crossover set to hit anything below 60Hz, and then have your 10" subs set to hit 60Hz-120Hz, and then maybe a set of 8" subs for anything higher.

Not trying to be a dick here dude... I'm just saying, from experience, you'd make more noise with a different enclosure. And, also, from experience, NEVER MIX SIZES or BRANDS. Sounds like ass. If you think it sounds good, you've never heard any decent quality music.

Yeah ok SO the BOSE in my diesel is not DECENT? How bout the BOSE in my house is it Decent? Since you havent heard any of it YOU DONT KNOW.

I didn't think that was the thread that got me banned, Bassballer's SQ Install was...dumb ass Audiomechanix dipshit.

Put nearly 300mi on the snowmobile betweeen my last posts and the ones above

*body is a bit sore

Bah, I can't post right lately. He paid LESS than MSRP, don't know the exact details but he's happy....

Edited February 25, 200817 yr by Penguin4x4

A Super Mod needs to either clean out the "SQ Show Off" thread or delete it entirely and start over...

I remember having a good thread like that in the VIP section without all the idiots posting in it, but it must have been lost in the data loss

A Super Mod needs to either clean out the "SQ Show Off" thread or delete it entirely and start over...

I remember having a good thread like that in the VIP section without all the idiots posting in it, but it must have been lost in the data loss

which thread?

Goes to buy salt for the water softener.

A Super Mod needs to either clean out the "SQ Show Off" thread or delete it entirely and start over...

I remember having a good thread like that in the VIP section without all the idiots posting in it, but it must have been lost in the data loss

I don't see a problem with it?

deadenhur

top

Hopefully by paying cash for the car I get in the next couple months will be enough pull to get the salesman to move a little bit. I want a car cover and a set of winter tires, too.

I will damn well get exactly what I want for my hard earned cash.

Hmm, think I could tow a 4000lb boat with that? I know they would in Europe.

If it were a diesel.... maybe

It's really annoying when you need a bolt and GM doesn't make it anymore and it's so odd that no one else does either

You need better stores, what exactly do you need?

Did you see that pic and specs I posted?

Laid down a layer of Damplifer Pro on the floor of the civic trunk and hatch. Awesome stuff. Back is flat out sore. I want to put more down and do the rear quarter walls but I am so not up for pulling off those parts that are 1/2 the length of the interior. Feel like if I get them off and get the damplifer down I am not going to put those panels back on.

Hmm, think I could tow a 4000lb boat with that? I know they would in Europe.

If it were a diesel.... maybe

If that were the 530i and 6 speed, there could not be a more perfect car for me for SSA show stuff.

Hopefully by paying cash for the car I get in the next couple months will be enough pull to get the salesman to move a little bit. I want a car cover and a set of winter tires, too.

Cash can actually sometimes hurt the negotiation as they make money in finance. I'd actually tell them you plan to finance with them and when it comes time in finance pay cash. What will make the salesman move is to be firm with your offers and 100% prepared to walk away if you don't get the deal you want. 9 out of 10 car deals I make, I get up to leave at least 2x in the process of negotiating.

Hmm, think I could tow a 4000lb boat with that? I know they would in Europe.

If it were a diesel.... maybe

A big v8 should be more than fine no?

It's really annoying when you need a bolt and GM doesn't make it anymore and it's so odd that no one else does either

You need better stores, what exactly do you need?

Did you see that pic and specs I posted?

It "looks" the same as the ones for the back seat of the e/c trucks. Obviously not sure, but GM is stupid enough to use multiple different ones.

If that were the 530i and 6 speed, there could not be a more perfect car for me for SSA show stuff.

It needs the M package!

Hmm, think I could tow a 4000lb boat with that? I know they would in Europe.

If it were a diesel.... maybe

A big v8 should be more than fine no?

Probably, but I don't think BMW ever put one in one of those

But, there are LT1 wagons.

And plenty of old Nova, Chevelle, and Impala wagons that can carry a big block.

TOO MUCH SHIT TO DO

beer time

It's really annoying when you need a bolt and GM doesn't make it anymore and it's so odd that no one else does either

You need better stores, what exactly do you need?

Did you see that pic and specs I posted?

It "looks" the same as the ones for the back seat of the e/c trucks. Obviously not sure, but GM is stupid enough to use multiple different ones.

I'll have to remember that.

About the GM thing... I had my friend order one, took 2 weeks to get it, and then it was a totally different bolt