Pics of our cars all taped up required.

definitely.

Basically

Gas For Z-71 + Insurance on Z-71 > Gas For Hyundai + Insurance for Hyundai + Payment For Hyundai

But you still have the Z-71 so therefore you aren't saving the insurance

See, the Z-71 liability only low mileage coverage + Hyundai coverage is still less than the Z-71's full coverage was

You need a new insurance agent....big time.

Needed, past tense. Which is why we switched the whole fleet to Geico around the same time as the purchase of the Hyundai...big savings across the board

OK, you can figure out the complex impedance of a series circuit using a right triangle and calculating the net effect of the capacitive and inductive reactance, but what's this shit about admittance?

lol, a friend and I were just trying to figure out wtf admittance is a couple days ago. we think it's just inductance in an AC circuit.

Isn't it the inverse of the impedance?

Y = 1/Z so yeah, basically...

Chevy girl finally decided she was done being mad at me because she still couldn't figure out after two weeks of thinking, why she was mad at me in the first place. She just got a Lt1 camaro as well (t56 tranny too!)...

6:45 left at work.

Cant wait for my new sub even though I don't have any idea what I'm gonna do with it.

Pics of our cars all taped up required.

all this taping, done to prevent chipping? bugs? both? i've never seen, nor herd, of anyone doing this. lol, would totally piss the wife off if i got up early and taped up the cooper. might jsut be worth the money in tape to do so.

put my father's day gift on layaway. ruger mark III with a baskina, basker, some cheap red dot sight. gotta wait my 3 days. grabbed a portable shooting bench as well. sweet gifts. now i have a platform to see just what the .17hmr can do!!

wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

Pics of our cars all taped up required.

all this taping, done to prevent chipping? bugs? both? i've never seen, nor herd, of anyone doing this. lol, would totally piss the wife off if i got up early and taped up the cooper. might jsut be worth the money in tape to do so.

put my father's day gift on layaway. ruger mark III with a baskina, basker, some cheap red dot sight. gotta wait my 3 days. grabbed a portable shooting bench as well. sweet gifts. now i have a platform to see just what the .17hmr can do!!

wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

Taping will protect against chipping, bugs etc... I have seen a lot of my buddies car club cars taped before traveling to car shows. I have even seen rims taped.

/\ TOP

Pics of our cars all taped up required.

all this taping, done to prevent chipping? bugs? both? i've never seen, nor herd, of anyone doing this. lol, would totally piss the wife off if i got up early and taped up the cooper. might jsut be worth the money in tape to do so.

put my father's day gift on layaway. ruger mark III with a baskina, basker, some cheap red dot sight. gotta wait my 3 days. grabbed a portable shooting bench as well. sweet gifts. now i have a platform to see just what the .17hmr can do!!

wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

Taping will protect against chipping, bugs etc... I have seen a lot of my buddies car club cars taped before traveling to car shows. I have even seen rims taped.

Yeah, Mike (azbass) did it on his VW for his trip up to one off the AZ meets.

The most epic example of this is when those 2 guys did an entire Audi and drove it across country. it used to be on vxvortex, but it looks like you have to be a member to see it now.

Pics of our cars all taped up required.

all this taping, done to prevent chipping? bugs? both? i've never seen, nor herd, of anyone doing this. lol, would totally piss the wife off if i got up early and taped up the cooper. might jsut be worth the money in tape to do so.

put my father's day gift on layaway. ruger mark III with a baskina, basker, some cheap red dot sight. gotta wait my 3 days. grabbed a portable shooting bench as well. sweet gifts. now i have a platform to see just what the .17hmr can do!!

wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

Taping will protect against chipping, bugs etc... I have seen a lot of my buddies car club cars taped before traveling to car shows. I have even seen rims taped.

Yeah, Mike (azbass) did it on his VW for his trip up to one off the AZ meets.

The most epic example of this is when those 2 guys did an entire Audi and drove it across country. it used to be on vxvortex, but it looks like you have to be a member to see it now.

Eliot's mr2 (completely show car) is often covered from front to back for anything over 100 miles. He even wraps the spare set of wheels he puts on the car for highway driving.

lol, that's jsut too damn much. they are only cars after all.

btw, tom, there is an SS for sale locally. looks pristine from the road. pretty pimp car, i only wish i had the extra cheddar to buy it.

wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

The VW guys made a whole deal out of it, they started doing parts of the interior, did their lap top, random road signs...

the whole thread was great

lol, that's jsut too damn much. they are only cars after all.

btw, tom, there is an SS for sale locally. looks pristine from the road. pretty pimp car, i only wish i had the extra cheddar to buy it.

wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

any pics?

wow.. this site is BUMPIN!!!!!!!

Chicken Fettucini was ok.. gotta love food from a box.

The VW guys made a whole deal out of it, they started doing parts of the interior, did their lap top, random road signs...

the whole thread was great

I remember that thread, great stuff.

Pics of our cars all taped up required.

all this taping, done to prevent chipping? bugs? both? i've never seen, nor herd, of anyone doing this. lol, would totally piss the wife off if i got up early and taped up the cooper. might jsut be worth the money in tape to do so.

put my father's day gift on layaway. ruger mark III with a baskina, basker, some cheap red dot sight. gotta wait my 3 days. grabbed a portable shooting bench as well. sweet gifts. now i have a platform to see just what the .17hmr can do!!

wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

that .17hm is a pretty badass little cartridge, 300yds is a fricking craps shoot though.

i wish I was home

Been up since 5:00 this morning.... TIme for fricken bed

There's no place like home.

Ramos,

I bought a Loc-R-Bar for the Ranger and the instructions say to use a 1 3/8" hole cutter for a drill. Basically I am not super excited about drilling into the gel coat since it is so purty. Any recommendations for me? Also, if you know of something better than the Loc-R-Bar it is returnable still, but I do want some extra protection for my rodz.

The Loc bar is fine. Before you drill, wipe the area down with some degreaser. Use good masking tape, and lay two layers ( criss cross ) down as smooth as possible over the intended hole area. Leave several inches of overhang so the shavings from the cut don't scratch the surrounding gel coat. Hole saw is easier to do it with than a unibit actually

Thank you sir!!

Never taped up my cars.........might be an idea when i move

I just choose not to tailgate anyone

Basically

Gas For Z-71 + Insurance on Z-71 > Gas For Hyundai + Insurance for Hyundai + Payment For Hyundai

But you still have the Z-71 so therefore you aren't saving the insurance

See, the Z-71 liability only low mileage coverage + Hyundai coverage is still less than the Z-71's full coverage was

You need a new insurance agent....big time.

Needed, past tense. Which is why we switched the whole fleet to Geico around the same time as the purchase of the Hyundai...big savings across the board

Warning, Geico's service is terrible if something happens and a good broker can get you a real company cheaper. My car insurance is about 35% cheaper than the Geico quote...

I forgot one other thing Ramos.

The Loc-r-bar didn't come with mounting hardware, I would assume that just some stainless screws pre-drilled per the shaft size would be the logical answer but would love your input.

Was down in the great city of Garden City all week, standing in front of a copier all day to get information to bring back for our research. booorrrrrring. I asked a lady there if there were any italian places to eat, she said "the closest thing we have is Pizza Hut." Mind you, this is a town of 35,000 at least. But probably about 30,000 mexicans, though, so there are about 3,000 mexican restaurants.

Italian in Garden City? Good lawd you were feeling optimistic weren't you?