I'm really really pissed with my sub install. It's such a damn headache to run the wire to the trunk. The center console have 10+ bolts holding it down. And to take off the seats as I had planned will require another special tool on top of the HUGE torques bit I just got. I want to deaden the floor, and really the firewall but this is retarded. Really really retarded.

I feel ya man. Seems like its always something. I do not have the easy to access hole in the firewall like M5 does and I own the same year truck both EC and both z71. I don't even have a drill bit big enough for the 1/0 so I'm going to have to get a unibit, and I am considering running the Power wire under the truck because its damn dear impossible to get a drill bit in a descent spot on the firewall.

On a good note though, box is on the way and seat lift is on the way! Still need an Icon...

Sean, is your truck LT?

I would go under the truck.... I'm almost thinking about it and I CAN go through the firewall. I think the 1/0 will look sloppy under the carpet.

There is a channel on the GM crap that is made for 1/0. There is not a single lump anywhere in the carpeting from it.

if you go to the website for the genesis it beats a porche in a race.. lol

where?

Or that fun doesn't stop where the pavement does...

which is the only way to have fun in a Toyota

unless you put a hell of an aftermarket system in one

There was a wiring bundle on the right side of my car under the plastic kick panel that I ran everything through.

if you go to the website for the genesis it beats a porche in a race.. lol

where?

maybe it was a 914?

I'm really really pissed with my sub install. It's such a damn headache to run the wire to the trunk. The center console have 10+ bolts holding it down. And to take off the seats as I had planned will require another special tool on top of the HUGE torques bit I just got. I want to deaden the floor, and really the firewall but this is retarded. Really really retarded.

I feel ya man. Seems like its always something. I do not have the easy to access hole in the firewall like M5 does and I own the same year truck both EC and both z71. I don't even have a drill bit big enough for the 1/0 so I'm going to have to get a unibit, and I am considering running the Power wire under the truck because its damn dear impossible to get a drill bit in a descent spot on the firewall.

On a good note though, box is on the way and seat lift is on the way! Still need an Icon...

Sean, is your truck LT?

I would go under the truck.... I'm almost thinking about it and I CAN go through the firewall. I think the 1/0 will look sloppy under the carpet.

There is a channel on the GM crap that is made for 1/0. There is not a single lump anywhere in the carpeting from it.

sounds like you're happy with something GM did....

Why Hello Dave!

Why Hello Dave!

i's just sayin haaiiiiiii

^^^^

That thing is a POS.

The hell it is. One hell of a fun commuter car and the inside is deceivingly large for a 3 door hatch. I've taken my fair share of naps curled up in the back seat of my dad's before

raaiiiiinnnnn, wheeeeeeeeeeee :D

but it's still freakin' sunny

hooray, hurricane, hooray

damn you guys need a new thread already. this must be slowing down the server somehow. 13937 pages holy chit

yeah, about that. um......no.

New thread,

Sure, make one in the Fi section...

I'm really really pissed with my sub install. It's such a damn headache to run the wire to the trunk. The center console have 10+ bolts holding it down. And to take off the seats as I had planned will require another special tool on top of the HUGE torques bit I just got. I want to deaden the floor, and really the firewall but this is retarded. Really really retarded.

I feel ya man. Seems like its always something. I do not have the easy to access hole in the firewall like M5 does and I own the same year truck both EC and both z71. I don't even have a drill bit big enough for the 1/0 so I'm going to have to get a unibit, and I am considering running the Power wire under the truck because its damn dear impossible to get a drill bit in a descent spot on the firewall.

On a good note though, box is on the way and seat lift is on the way! Still need an Icon...

Sean, is your truck LT?

I would go under the truck.... I'm almost thinking about it and I CAN go through the firewall. I think the 1/0 will look sloppy under the carpet.

Have you thought about/tried under the door jam deal? I have a 98 explorer and it surprised the heck out of me that my 1/0 would fit under there and it would still snap down.

I noticed the other day that the 6.5 Pioneer coax's, with no deadening or amp in the Saturn really get low for what it is. I was listening to Three6 Mafia - Late Night Tip and there was actually a good bass presence. Which makes me think that the Saturn would be good for an SQ system

One vehicle at a time....

Except that it is a noisy pos and battling that is going to kill you.

that is what i told him

sounds like you're happy with something GM did....

That is true. Great cable management built in

It also had the most underseat box space which was a factor in my purchase along with easy doors to work with. For stereo installation I am happy with my truck.

Went to the liquor store and walked out with two six packs and a bottle of Jack.

Now all I have to do is find out what concealed carry gun I'm going to buy. That Ruger LCP looks tempting.

That is a lot of grease.