now for round 2 of the boat motor

wish me luck

round 2 goes to the boat again! Damnit!

hopefully Mks pops can get it out, or i will be buying another part!

(just wish my dad would by a new E-Tec <3)

Has E-Tec Boner

Need help here guys...........wife and I purchased a new bed. The store that sold it to us wont do shit about the depression without a recept and she lost it............any ideas?

How old is the bed, where did you buy it from, how much did it cost, and without sounding like a total and utter deuche, why do you care?

realistically it's not a bad thing and will happen in 99.9% of all beds.

I sold beds/furniture for 3 years and managed the stores too. I have WAY too much info about it.

Cali King Bed...............paid all together about 800 bucks with box spring and frame.......had it for not even a month and I care beacuse a 10" wide depression in my bed is no fuckin joke, it sux ass to sleep on.

Is it a sag in the middle of the bed? That would be bad. If it's really uncomfortable it doesn't sound like body impressions which are normal and nothing can stop them.

Usually for a true sag you can get it covered by the store or the mfgr. If it has ANY stains tears burns or rips though they won't help.

Outer left portion of the matress. Centered in hight, and nothing wrong at all stain, rip, burn or tear wise. It just has a depression about the size of my ass. Its where I sit down at night before I roll over to the wife.

J

i believe u need the s-video cable.

you cant get straight HD out of coaxial. I think but could be wrong

S-Video is weak sauce these days. Only a step about coax I believe. RGB components and HDMI are for real HD

I hate to say it, but this place is starting to get flooded with idiots. Too many people who don't know what the fuck they are talking about, but they spew some big shit and the guy asking the question doesn't know right from wrong, so. . .

Understatement, I stopped reading any and all threads related to subs. Outside of the hop this has me reading about 2 threads a day. Whenever I venture out of that domain I want to leave. Some days I think perhaps the level on crapshitfestaudio might now be surpassing here

Thoughts on actively removing posts that are flat out incorrect?

Is that really what you & Mark want?

That is a good question. I was thinking of making an "incorrect post" section to drop those posts. As I cannot keep up with every post, and as we grow I cannot expect Mark or i and the super mod team to read every post and know in depth all the details of the topic or question at hand. But if we could find an amicable way to keep the wrong info off or diverted and help make sure the forum as a whole, functions as it is supposed to, in that is working together to correctly find the solution or solutions to problems or questions that members have. SSA has a reputation as a forum where people come to for more advanced help or a source of better knowledge, and keeping it that way is important to me.

There would be a gray area between correct post and heavily opinionated ones. Then there is also the times where people really and truly believe they are right and would never forget that.

now for round 2 of the boat motor

wish me luck

round 2 goes to the boat again! Damnit!

hopefully Mks pops can get it out, or i will be buying another part!

(just wish my dad would by a new E-Tec <3)

Has E-Tec Boner

I would be in love to if we got a new motor. but i believe it may happen in a year or so :Hopes:

*continues rank farting*

Speaking of photos. We still don't know what a trimmed up yeti looks like.

Need help here guys...........wife and I purchased a new bed. The store that sold it to us wont do shit about the depression without a recept and she lost it............any ideas?

How old is the bed, where did you buy it from, how much did it cost, and without sounding like a total and utter deuche, why do you care?

realistically it's not a bad thing and will happen in 99.9% of all beds.

I sold beds/furniture for 3 years and managed the stores too. I have WAY too much info about it.

Cali King Bed...............paid all together about 800 bucks with box spring and frame.......had it for not even a month and I care beacuse a 10" wide depression in my bed is no fuckin joke, it sux ass to sleep on.

Oh that kind of depression. I thought you were saying you wanted to take it back because of the economic depression. I was thinking this dude is fuckin nutz!

Nine more samples to go.

damn you are working late

T0PPAGE

damn you are working late

Eight am till what is looking like midnight. Hour for lunch and an hour for supper.

I hate to say it, but this place is starting to get flooded with idiots. Too many people who don't know what the fuck they are talking about, but they spew some big shit and the guy asking the question doesn't know right from wrong, so. . .

Understatement, I stopped reading any and all threads related to subs. Outside of the hop this has me reading about 2 threads a day. Whenever I venture out of that domain I want to leave. Some days I think perhaps the level on crapshitfestaudio might now be surpassing here

Thoughts on actively removing posts that are flat out incorrect?

IMO Aaron it's the wrong way too go.

However altering the post and putting the correct information in the same post box with a note and a warning to the offender may be advisable. If you just erase it, no matter how just it will just look like someone having a pissy fit. You could close the thread if it's short. But I think warning the offender is more the way to go.

Well said.

You can just imagine the panties in a twist should idiotic posts be deleted though, because the offenders would still think they are right.......

In the end who will determine what is correct and what is wrong info ?

That why I said in an earlier post that it is too much to ask of the super mod team to know all and see all, just not going to happen unless we add on a stack of new mods, and at this point that is not needed nor do I feel comfortable doing so.

Right & wrong requires a direction. Without a direction I could know call 80% of the advice on the forum wrong.

Going up to Arctic Cat tonight

In Thief River Falls?

Yep, stopped in Detroit Lakes though for dinner and a hotel. I grew up here and damn it feels good to be staying in a spot over looking the lake.

now for round 2 of the boat motor

wish me luck

round 2 goes to the boat again! Damnit!

hopefully Mks pops can get it out, or i will be buying another part!

(just wish my dad would by a new E-Tec <3)

Has E-Tec Boner

Why, have you never seen an XS before?

Need help here guys...........wife and I purchased a new bed. The store that sold it to us wont do shit about the depression without a recept and she lost it............any ideas?

How old is the bed, where did you buy it from, how much did it cost, and without sounding like a total and utter deuche, why do you care?

realistically it's not a bad thing and will happen in 99.9% of all beds.

I sold beds/furniture for 3 years and managed the stores too. I have WAY too much info about it.

Cali King Bed...............paid all together about 800 bucks with box spring aIt'nd frame.......had it for not even a month and I care beacuse a 10" wide depression in my bed is no fuckin joke, it sux ass to sleep on.

Oh that kind of depression. I thought you were saying you wanted to take it back because of the economic depression. I was thinking this dude is fuckin nutz!

It's Jordan, he is nutz

negative connotations step aside

Hmmm

<-- wants to go to the bar

on the boat motor part, im just saying E-Tec cuz i tend to favor evinrude/johnson

i was looking around and found some yamahas 4-strokes for about the same price as the E-Tecs

and a mercury max for less too

Its just up in the air sort of right now

alot of wishing on my part

Already have had 8 beers and a couple crown royals so

<--probably shouldn't drive

Already have had 8 beers and a couple crown royals so

<--probably shouldn't drive

ya doesnt sound like a smart choice

Last second asked one of my high school "friends" to meet me out. She didnt' answer the phone or email, but considering she has a 3 and 1 year old I shouldn't be surprised. Wish I had known I was staying here.

on the boat motor part, im just saying E-Tec cuz i tend to favor evinrude/johnson

i was looking around and found some yamahas 4-strokes for about the same price as the E-Tecs

and a mercury max for less too

Its just up in the air sort of right now

alot of wishing on my part

Yamaha can fucking bite me. Worst outboards ever. They might be able to make an engine, but surely not a marine engine. Run away. Mercury XS >>> all others (2 stroke anyway)

<--thinks 4 stroke marine outboards are dumb

Going up to Arctic Cat tonight

In Thief River Falls?

Yep, stopped in Detroit Lakes though for dinner and a hotel. I grew up here and damn it feels good to be staying in a spot over looking the lake.

Nice. We had a Digi-Key (also in Thief River Falls) rep come to our class and give a presentation on all that they have to offer. Their biggest sales pitch was the fact they are right next to the Arctic Cat facility. Oh and the female to male ratio is IIRC 3 to 1. Nobody from my class, all seven of us, didn't really bite on his offers but we got free pizza out of the whole thing.

He was far less convincing than the FBI recruiter.

A hundred and twenty thousand pounds makes things go bang.