u make those ryan?

those are sweet..

how about some 18ft long?

wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

How many do you want?

i was just messin..lol..

though a couple of pair wouldn't hurt....how much for a short pair..like 2ft? and a couple of long pair?

wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

heya..

u guys see what i got today?

check out the soundsplinter forum...

yeah tom, there's pics...

wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

Kent, i want one (or 2)

i might want another one..lmao!!!

and supa...my boy is dying to have a lil beat of his own..the boy listens to chingy's holiday inn every night b4 bed..lol...

wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

Kent, shoot me a PM with exact lenghts. I think I'm going to have to order some more ends.

heya..

u guys see what i got today?

check out the soundsplinter forum...

yeah tom, there's pics...

wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

<{POST_SNAPBACK}>

Kent, i want one (or 2)

<{POST_SNAPBACK}>

i might want another one..lmao!!!

and supa...my boy is dying to have a lil beat of his own..the boy listens to chingy's holiday inn every night b4 bed..lol...

wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

<{POST_SNAPBACK}>

LOL, thats pretty funny/cool

heya..

u guys see what i got today?

check out the soundsplinter forum...

yeah tom, there's pics...

wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

Kent, i want one (or 2)

i might want another one..lmao!!!

and supa...my boy is dying to have a lil beat of his own..the boy listens to chingy's holiday inn every night b4 bed..lol...

wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

LOL, thats pretty funny/cool

yeah...the wifey hates the first few moments of the song..but he's a boy..hehe

ryan.....2 pair 2ft, 2 pair 18ft...

but don't go ordering anything special because of this....i just want them to have them....and will use a short pair to replace the set in the wife's car.....

wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

Ryan, those are nice, to bad its 2 seperate ones

Ryan, those are nice, to bad its 2 seperate ones

That's the way I ordered the cable. Works better for my install. It just so happens it will work better for someone else too. Some simple shrink around them will easily couple them to a pair and that way you can dress them however you like. That's the best part. It truly gives you the ability to have a CUSTOM install.

Mine for instance, will have red Techflex and red shrink. Currently looking for a bulk amount of gunmetal ends though and having no luck.

suckage.

Make me a pair for the regal

Ike sound has a DEQ/DEX p9 combo for $690.

Both are refuebed and come with warranty

There is one combo selling on ebay for $720 with 13 hours left.

Which would you choose ?

Ike sound has a DEQ/DEX p9 combo for $690.

Both are refuebed and come with warranty

There is one combo  selling on ebay for $720 with 13 hours left.

Which would you choose ?

Ikesound. Will have warranty.

You guys think its worth it to buy ?

SOB, i just realized that i passed post #6969 !

HAHA!

It just so happens it will work better for someone else too.

I wonder who that could be...hmm...

They look good.

im guess someone named Hagop?

wtf

Pics will be coming soon when I get everything, don't worry

supa, I would get it from Ikesound if you get it, warrenty makes a difference for me

kent, I want that RL-i 8 BAD!!!, but then I feel I should grab the SS flagship also while its on GB, but then how can I save for the LMT?

damn decisions, I should unload the H2 and put Ti in its place for now

i've already got the rl-p..hehe...now an rl-i...soon an LMT. i'm eventually going to have one of whatever he decides to make. i dunno why..lmao...but i will.

anyway, in all honesty..the 8 will get tested this weekend..and probably put up. i really have no need for it..hehe...but i wanted it.

when the LMT's get out, i might yank the s18x and put a pair of 15's in the truck..we'll see. hopefully, mike will let me test one and then i'll decide if that's the route i'm going.

i've got to say this...the more i look at this 8, the more amazed i am at it's beef. i've had what i consider some of the f=beefiest 8's ever, rfhx2's, and this thing makes them look small..lol.

and the pup's overall height is just about the same as the motor on the rl-i...

wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

i've already got the rl-p..hehe...now an rl-i...soon an LMT. i'm eventually going to have one of whatever he decides to make. i dunno why..lmao...but i will.

lucky bastage

anyway, in all honesty..the 8 will get tested this weekend..and probably put up. i really have no need for it..hehe...but i wanted it.

I swear, I will buy it from you after you test it

when the LMT's get out, i might yank the s18x and put a pair of 15's in the truck..we'll see. hopefully, mike will let me test one and then i'll decide if that's the route i'm going.

i've got to say this...the more i look at this 8, the more amazed i am at it's beef. i've had what i consider some of the f=beefiest 8's ever, rfhx2's, and this thing makes them look small..lol.

and the pup's overall height is just about the same as the motor on the rl-i...

wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

maybe I should sell the H2 and run a pair of D4 RL-p's sealed off the amp, because I think sealed they should be safe

i've already got the rl-p..hehe...now an rl-i...soon an LMT. i'm eventually going to have one of whatever he decides to make. i dunno why..lmao...but i will.

lucky bastage

anyway, in all honesty..the 8 will get tested this weekend..and probably put up. i really have no need for it..hehe...but i wanted it.

I swear, I will buy it from you after you test it

when the LMT's get out, i might yank the s18x and put a pair of 15's in the truck..we'll see. hopefully, mike will let me test one and then i'll decide if that's the route i'm going.

i've got to say this...the more i look at this 8, the more amazed i am at it's beef. i've had what i consider some of the f=beefiest 8's ever, rfhx2's, and this thing makes them look small..lol.

and the pup's overall height is just about the same as the motor on the rl-i...

wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

maybe I should sell the H2 and run a pair of D4 RL-p's sealed off the amp, because I think sealed they should be safe

i believe in the right box, the rl-p's will take 1200wrms each easily. ported or sealed. i ran my twelve off 1200wrms ported...and it did fine. and u being u, i doubt u'll crank it excessivly or not know when to notch it down. and u'll like the rl-p's.

and then ur on ur way to being like me!!

wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

i've already got the rl-p..hehe...now an rl-i...soon an LMT. i'm eventually going to have one of whatever he decides to make. i dunno why..lmao...but i will.

lucky bastage

anyway, in all honesty..the 8 will get tested this weekend..and probably put up. i really have no need for it..hehe...but i wanted it.

I swear, I will buy it from you after you test it

when the LMT's get out, i might yank the s18x and put a pair of 15's in the truck..we'll see. hopefully, mike will let me test one and then i'll decide if that's the route i'm going.

i've got to say this...the more i look at this 8, the more amazed i am at it's beef. i've had what i consider some of the f=beefiest 8's ever, rfhx2's, and this thing makes them look small..lol.

and the pup's overall height is just about the same as the motor on the rl-i...

wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

maybe I should sell the H2 and run a pair of D4 RL-p's sealed off the amp, because I think sealed they should be safe

i believe in the right box, the rl-p's will take 1200wrms each easily. ported or sealed. i ran my twelve off 1200wrms ported...and it did fine. and u being u, i doubt u'll crank it excessivly or not know when to notch it down. and u'll like the rl-p's.

and then ur on ur way to being like me!!

wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

don't have the space for 12's ported in the sled, unless I go small ported

i've already got the rl-p..hehe...now an rl-i...soon an LMT. i'm eventually going to have one of whatever he decides to make. i dunno why..lmao...but i will.

lucky bastage

anyway, in all honesty..the 8 will get tested this weekend..and probably put up. i really have no need for it..hehe...but i wanted it.

I swear, I will buy it from you after you test it

when the LMT's get out, i might yank the s18x and put a pair of 15's in the truck..we'll see. hopefully, mike will let me test one and then i'll decide if that's the route i'm going.

i've got to say this...the more i look at this 8, the more amazed i am at it's beef. i've had what i consider some of the f=beefiest 8's ever, rfhx2's, and this thing makes them look small..lol.

and the pup's overall height is just about the same as the motor on the rl-i...

wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

maybe I should sell the H2 and run a pair of D4 RL-p's sealed off the amp, because I think sealed they should be safe

i believe in the right box, the rl-p's will take 1200wrms each easily. ported or sealed. i ran my twelve off 1200wrms ported...and it did fine. and u being u, i doubt u'll crank it excessivly or not know when to notch it down. and u'll like the rl-p's.

and then ur on ur way to being like me!!

wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

don't have the space for 12's ported in the sled, unless I go small ported

well, they get plenty loud sealed..lol...

man, this is the most i've seen u post in here ever..lol..

wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

hello....(echo) (echo) (echo)