Mike...

OK Mike...

I hadn't seen anything outa him for awhile, I wasen't even sure if he was still a mod. I guess I know now.

Which mike? lol. DBfan? Admin's name is mike?? everyone over there is named Mike!

To many dang Mikes then...

My preamp is also a Mic amp...

*Just a little Mike fyi*

how about a nice mika???

J

You have a mic pre? You doing Kareoke?

Silly British and their component sets.

I'm thinking of putting the tubes back in the one monoblock I have here, opening the case on the new preamp and seeing if everything works well...so what if I've only got one channel here...

You have a mic pre? You doing Kareoke?

No, its just they way its made.

http://www.behringer.com/T1953/index.cfm?lang=ENG

I've upgraded the tubes in it aswell.

You break one of your amps jim?

No, its just they way its made.

http://www.behringer.com/T1953/index.cfm?lang=ENG

I've upgraded the tubes in it aswell.

<{POST_SNAPBACK}>

I see.....denial.

I need to get my arse out to the woodshop...

I wanted to go with a true tube preamp, but mines a hell of alot cheaper.

Nah, needed to tweak the wooden base a bit, I built it a little too small and it probably would have seperated the miter joints over time. So I had to bring it back with me from B'burg and fiddle with it.

Whooosh................fire house!!!!

And it's gone!!!

J

I wanted to go with a true tube preamp, but mines a hell of alot cheaper.

<{POST_SNAPBACK}>

I thought about going with a full tube preamp for mine, but...there's no getting around the fact that a AC-heated, tube rectified cathode follower is noisy. Especially with efficient speaks.

The nice thing about the Rogue is that it should be stone quiet...

Werd.

Hello JimJ it appears that you have not posted on our forums in several weeks, why not take a few moments to ask a question, help provide a solution or just engage in a conversation with another member in any one of our forums?

Blow me.

Werd.

<{POST_SNAPBACK}>

Since I've gone with DC filaments in the monos, I'm never going back to AC again Hum? Lamination rattle? Whuzzat?

I want to go out and use some cardboard to mock(sp?) up my trunk for my new install..... but it's hot and humid out there

WinISD online only figures round ports... fudge.

jimk u should give ue ur admin pass..........i'll jack alot of stuff up

Werd.

<{POST_SNAPBACK}>

Since I've gone with DC filaments in the monos, I'm never going back to AC again Hum? Lamination rattle? Whuzzat?

<{POST_SNAPBACK}>

My HiFi News has a very interesting article on tube coolers/dampeners in it. He measured the resonance of the tubes (glass part I believe) and the best solution was to place the cage on the amps. Just like from the factory.

I'm thinking something along the lines 3 cubes at 40hz for quad 7" Dayton References to screw around with, I need somting to do with the 4 that I have and I wanna see what kinda output they would have.

jimk u should give ue ur admin pass..........i'll jack alot of stuff up

<{POST_SNAPBACK}>

I only wish I had an admin account