Would mean more time in Detroit and SoCal though.

o snap TOP

Really want to get a LLAAARRRGGGGEEEE alternator for my chit box , and run the power 1000 in 2 channel mode at like 1ohm. Roof flex my fooking arse, roof removal

i've got to get around...

might be changing jobs, getting back into the welding/fabrication field. i have an interview/weld test if i want to go today....

wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

My bro-in-law welds stainless for a living, which makes me really want to open up an outdoor kitchen consulting/installation company.

i've welded on just about every metal you can think of, with just about every kind of weld you can name..lol...SS is awesome to weld on though. it's soft, but it lays sweet....

wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

Doesn't lay for chit when I try Not much practice though and I only have an Oxy-Ace torch.

i hope your using the oxy/ace to braze and not cut SS....it'll just melt..

and i've never really brazed, but they say it's alot like TIG..gotta make sure your adding enough rod to get it "dime" up...

wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

I tried SS once, and it was ugly. Went to galvanized instead which ain't great either.

Would mean more time in Detroit and SoCal though.  Not sure I love the idea of Detroit, but it would open up a HUGE customer base to me and a reason to visit all of the automotive engineering labs.

Pfftttt

So cal> detroit

Detroit sucks, but they have some really cool labs that are huge. San Jose, CO, and MN are all similar in our labs with of course the density in SV being higher. Fun companies to go into though.

we have sillycone valley

Is that in San Diego?

HOLY HELL!

Kent, that 12 combo you sold me. Uber happy with it. I turn it up to just below clipping point and my shot glasses where rattleing out of the case even on non bass heavy songs and the sub was centered and not corner loaded (actually 3 feet from the nearest wall too)

One bass heavy tracks (dirt off your sholders) My dad's 30lb shadow box in the living room was rattleing (kinda scared me so I turned it down).

After I'm done using the amp for testing I'm gonna glue some braces in there and corner load it and it will be my new sub. I was gonna run the Ava18 once I got my mag in but it is more than enough (allowable by the parents/neighbors) and blends well with my JBL bookshelf speakers.

If I can steal the video camera for a little while I will get some video. Not of the shaddow box rattleing because that is the last thing I want to break in the house.

dat is the sweetness! those avalon's are nice subs....glad your enjoying it..was a helluva buy!

wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

Really want to get a LLAAARRRGGGGEEEE alternator for my chit box , and run the power 1000 in 2 channel mode at like 1ohm. Roof flex my fooking arse, roof removal

<{POST_SNAPBACK}>

Bah, dont need a large alt, just need one with more voltage

The mere sight of the door turns weaker men to stone

<{POST_SNAPBACK}>

That would mean they are really fugly like Medusa

<{POST_SNAPBACK}>

Some are , most are from before the "bling" era

Would mean more time in Detroit and SoCal though.

Some are , most are from before the "bling" era

:) :) :) :) :) :) :) :) :) :) :) :) :)

Really want to get a LLAAARRRGGGGEEEE alternator for my chit box , and run the power 1000 in 2 channel mode at like 1ohm. Roof flex my fooking arse, roof removal

<{POST_SNAPBACK}>

Bah, dont need a large alt, just need one with more voltage

<{POST_SNAPBACK}>

Could use a healthy dose of amperage as well . OEM alt is only 70amp

The mere sight of the door turns weaker men to stone

<{POST_SNAPBACK}>

That would mean they are really fugly like Medusa

<{POST_SNAPBACK}>

Some are , most are from before the "bling" era

<{POST_SNAPBACK}>

Really want to get a LLAAARRRGGGGEEEE alternator for my chit box , and run the power 1000 in 2 channel mode at like 1ohm. Roof flex my fooking arse, roof removal

<{POST_SNAPBACK}>

Bah, dont need a large alt, just need one with more voltage

<{POST_SNAPBACK}>

Could use a healthy dose of amperage as well . OEM alt is only 70amp

<{POST_SNAPBACK}>

Thats pretty small.

As jim put it , a lot look like cb amps or something

HOLY HELL!

Kent, that 12 combo you sold me. Uber happy with it. I turn it up to just below clipping point and my shot glasses where rattleing out of the case even on non bass heavy songs and the sub was centered and not corner loaded (actually 3 feet from the nearest wall too)

One bass heavy tracks (dirt off your sholders) My dad's 30lb shadow box in the living room was rattleing (kinda scared me so I turned it down).

After I'm done using the amp for testing I'm gonna glue some braces in there and corner load it and it will be my new sub. I was gonna run the Ava18 once I got my mag in but it is more than enough (allowable by the parents/neighbors) and blends well with my JBL bookshelf speakers.

If I can steal the video camera for a little while I will get some video. Not of the shaddow box rattleing because that is the last thing I want to break in the house.

<{POST_SNAPBACK}>

dat is the sweetness! those avalon's are nice subs....glad your enjoying it..was a helluva buy!

wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

<{POST_SNAPBACK}>

yeah it was.

Welp, I'm off to XC practice then dinner with the lady. *shawam*

Would mean more time in Detroit and SoCal though.  Not sure I love the idea of Detroit, but it would open up a HUGE customer base to me and a reason to visit all of the automotive engineering labs.

Pfftttt

So cal> detroit

Detroit sucks, but they have some really cool labs that are huge. San Jose, CO, and MN are all similar in our labs with of course the density in SV being higher. Fun companies to go into though.

we have sillycone valley

Is that in San Diego?

Negatory.

They do have a sweet air show going on that i totally forgot to take pics of.

By sillycone I thought you meant audio. If you look in my post, you will see I referenced SV. The Minneapolis & Denver outskirts are real similar to SV. Next week in CO I am visiting: Seagate, Maxtor (what's left of them), StorageTek, Quantum, InPhase, Micromotion, Otologics, NIST, and Ball Aero. Really similar customer base to SV...

LongQuoteTOP

Really want to get a LLAAARRRGGGGEEEE alternator for my chit box , and run the power 1000 in 2 channel mode at like 1ohm. Roof flex my fooking arse, roof removal

<{POST_SNAPBACK}>

Bah, dont need a large alt, just need one with more voltage

<{POST_SNAPBACK}>

Could use a healthy dose of amperage as well . OEM alt is only 70amp

<{POST_SNAPBACK}>

Thats pretty small.

<{POST_SNAPBACK}>

Yes, yes it is . And I'll thank you to keep that to yourself

/\ doesn't need to compensate

Just had a customer email a paper on sorting pistachio nuts using acoustic response as they bounce off a steel plate. The acoustic signature will tell if they are open are not, he now wants to do it with vibration and needs my help. Funny chit.

Speak softly , and carry a four foot amp

ramos you going to snatch the halfer for your collection?

and then some

wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

I'm a watching it

Speak softly , and carry a four foot amp

how big was that old Fultron surfboard?