Kent, would you be interested in drawing up some design ideas for a tattoo? I'm perfectly willing to paypal some $$ for your time.

Something along the sorts of the center 3 or 4 rings of a target, 3 bullets cloverleaf in the 10 ring and above it it says Impossible is nothing, below it says Belief is everything.

My artistic ability only extends to woodworking, I suck at drawing.

*psst* Kent, did you see this? Don't mean to be a nag at all though.

Matt, if you need a new compressor: http://phoenix.craigslist.org/pts/366171309.html

thanks, i'm going out here in a few to burn my ass up, change the belts and check the rear brakes. pucking stratus, pucking sun....oh yea, i have pics of frankenpods

Dennis, what tweets?

vifa D26NC05

PM me info and price.

Just PM me your address and you can have them.

Ryan I think it's safe to say that moving was probably the best option. That sounds a lot like someone I knew who could be a bitch but it was more like she was just to damn indecisive. Your probably making the right choice, I honestly wouldn't even talk with her for a while but that's just me.

Audio-neon, yeah man go check out transformers I think you'd like it. Just be prepared for a 144 minute movie

Kobayashi lost

The chitbox is pretty fun to drive offroad. It has enough power to slide sideways in 4 wheel high on loose stuff

I am not too pleased with my econo'chit' box lately. 15 mpg from a 4banger just b/c I am missing a radiator fan (will be in on monday) just pisses me off.

i got 47 in the jeep, on the highway

would be scary to find out how much the dub gets

My truck gets better mileage than my car

happy 4th of July everbody!

what capacitor value do i need to make a crossover for a tweet (HPF @ 2khz or thereabouts)? i use WinISD but the value it gave me did not work

8ohm tweet BTW

How good are the prices on these things?

http://phoenix.craigslist.org/ele/366382572.html

http://phoenix.craigslist.org/ele/366388053.html

http://phoenix.craigslist.org/ele/366416848.html

http://phoenix.craigslist.org/ele/366458151.html

Quick question, is it ok to leave RCA's unplugged from the amp but still plugged into the radio? I don't want to start my truck on fire if there's a powerful signal running out the end of them. It'll be disconnected for 2-3days

-John

what capacitor value do i need to make a crossover for a tweet (HPF @ 2khz or thereabouts)? i use WinISD but the value it gave me did not work

C=1/(2*pi*f*Z)

C=1/(2*pi*2000*8)

C=9.947uF

Pick the closest value lower than that.

Quick question, is it ok to leave RCA's unplugged from the amp but still plugged into the radio? I don't want to start my truck on fire if there's a powerful signal running out the end of them. It'll be disconnected for 2-3days

-John

No.

what capacitor value do i need to make a crossover for a tweet (HPF @ 2khz or thereabouts)? i use WinISD but the value it gave me did not work

C=1/(2*pi*f*Z)

C=1/(2*pi*2000*8)

C=9.947uF

Pick the closest value lower than that.

i tried a 10 and got no sound out of the tweet at all, so maybe it was a bad cap

what capacitor value do i need to make a crossover for a tweet (HPF @ 2khz or thereabouts)? i use WinISD but the value it gave me did not work

C=1/(2*pi*f*Z)

C=1/(2*pi*2000*8)

C=9.947uF

Pick the closest value lower than that.

i tried a 10 and got no sound out of the tweet at all, so maybe it was a bad cap

do you know if it needs to be in parallel or series with the tweet?

Series on the positive.

even though that doesn't sound correct, you connect the positive to one side of the cap and the other side of the cap to the positive speaker terminal.

Quick question, is it ok to leave RCA's unplugged from the amp but still plugged into the radio? I don't want to start my truck on fire if there's a powerful signal running out the end of them. It'll be disconnected for 2-3days

-John

No.

so "no" it's not okay to leave them disconnected, or "no" there's not a powerful signal running through them?

just wanna make sure

if it's not okay, can I just leave the radio power off and drive in silence? Will that solve the problem?

thanks for the reply

-John

Edited July 4, 200718 yr by ILuvJDM

Quick question, is it ok to leave RCA's unplugged from the amp but still plugged into the radio? I don't want to start my truck on fire if there's a powerful signal running out the end of them. It'll be disconnected for 2-3days

-John

No.

so "no" it's not okay to leave them disconnected, or "no" there's not a powerful signal running through them?

just wanna make sure

if it's not okay, can I just leave the radio power off and drive in silence? Will that solve the problem?

thanks for the reply

-John

you don't want to leave them disconnected

you can leave the radio off or you can wrap a paper towel or something around them and tape it together so they don't touch any metal

you don't want to leave them disconnected

you can leave the radio off or you can wrap a paper towel or something around them and tape it together so they don't touch any metal

ok, so if I insulate them they'll be ok? But still keep the radio powered off?

thanks,

-John

Insulate them, and make sure they don't short out.

blah, damn humidity is killing me

yea the cap didn't work at all, damn...caps

pucking pods

and new belt didn't fix squeeling, damn stratus

Work gave me an '07 2500HD reg cab flat bed to beat the shit out of. 125km on the odometer. Perfect.