i need a 1kw plate amp.

A lot of power for an 18 in the house

Seems like I'm going to replace the caps in a motherboard....

Stupid thing didn't want to boot right...when I opened the case some caps around the cpu were all brown on the top. Can't be a good thing for sure

Didn't work on the car today at all.

I just chased parts for the backhoe loader.

Stealership wanted $190 for a single bearing. Found just the bearings it needs for $14ea. Quite some savings

the Q is a 15". I would be happy with less power but I like the idea of having it on tap as well. This will probably be going in the gf's new room so the next time her roomie's wanna be loud we can have a little contest.

btw all going in her room because my room next year is going to be tiny. hers will be big enough to actually enjoy the zdts

lol

extra power is always nice!

top^

i think it was two days ago they had the little ipod dock thing blasting out at full volume, annoying as fuck.

^^ and not my house, so i of course didn't say anything

^^ and not my house, so i of course didn't say anything

I know the feeling...

this LCD is soooooo much better with a DVI cable. Much more "focused", less blurry, text is much much more readible,

If you have a sub out on whatever your sending the signal to the sub with so you don't have to have a external crossover, a old QSC rack amp or something would be cheaper than the plate amp, then you could use it for mains along the way when you change sub setups or something.

Or hell, just use a Harrison lab FMOD for your filter.

Don't know if I posted it but....

These Bishes are on the way!

oh yeah.... and I'm FUCKIN STOKED!!!

but I still don't know what I'm doing about the exhaust.....

but I will have something before Aug 2nd when I go to Denton even if its local non-mandrel exhaust. I will have a bad ass exhaust for the meet!

Dump straight after the headers?

the signal will be coming from an onkyo receiver. adjustable crossover but no subsonic, though the sub will be sealed anyway. only problem is the lowest crossover freq is 60hz. A little high for my taste.

One day Mrs. Jones went to have a talk with the minister at the

local church. "Reverend," she said, "I have a problem, my

husband keeps falling asleep during your sermons. Its very

embarrassing. What should I do?"

"I have an idea," said the minister. "Take this hatpin with you.

I will be able to tell when Mr. Jones is sleeping, and I will

motion to you at specific times. When I motion, you give him a

good poke in the leg."

In church the following Sunday, Mr. Jones dozed off. Noticing

this, the preacher put his plan to work. "And who made the

ultimate sacrifice for you?" he said, nodding to Mrs. Jones.

"Jesus!", Jones cried as his wife jabbed him the leg with the

hatpin.

"Yes, you are right, Mr. Jones," said the minister. Soon, Mr.

Jones nodded off again. Again, the minister noticed. "Who is

your redeemer?" he asked the congregation, motioning towards

Mrs. Jones.

"God!" Mr. Jones cried out as he was stuck again with the hatpin.

"Right again," said the minister, smiling. Before long, Mr.

Jones again winked off. However, this time the minister did not

notice. As he picked up the tempo of his sermon, he made a few

motions that Mrs. Jones mistook as signals to bayonet her

husband with the hatpin again.

The minister asked, "And what did Eve say to Adam after she bore

him his 99th son?"

Mrs. Jones poked her husband, who yelled, "You stick that

goddamned thing in me one more time and Ill break it in half

and shove it up your a**!"

"Amen," replied the congregation.

lmfao in the manual for the receiver this is written below instructions for attaching the fm antenna

Caution: Be careful that you don't injure yourself when using thumbtacks.

Don't know if I posted it but....

These Bishes are on the way!

:woot:

part of me reallly wants to redesign the zdts with bins on the bottom to fit an E8 each and do stereo bass. too much work though, especially since the receiver won't support it.

top

Dump straight after the headers?

Hell no I'm cutting it before the collectors

I will do a little vid for you guys with just headers

I'm not sure if its true yet... I may be dreaming...

But I think these are bolt up! and the exit style I want!!!! I dunno if I'll like gibson, but if not I'll replace it with a magnaflow :)

Now to find a place that can get it shipped to me before next weekend :EEK: