We did 148.6 on the first run but we didn't take a picture... got hot after a couple of burps so it went down a hair

We have four 1500Ds @ 2 ohms each on it, no clue on actual power after rise - but I think it would actually sustain more on a burp.

Not bad for my upcoming 1000-watt rated woofer, huh ?

great score right there.

Same box / setup as we test the Monster sub with - but we have the amps at 2 ohms each vs. 1/2 ohm each.

Z series. What are you owned by Pioneer?

Z series. What are you owned by Pioneer?

Haha, no

Using the same letters as the amps...

I will have E, X, and Z series woofers when the lines fill out.

These are great sounding drivers too Dizzle, not just SPL

what class is the nightshade?

what class is the nightshade?

It is it's own class

as they should be!

thay are killer subs jacob, the nightshades make me grin everytime i turn that little knob!

doin hair tricks with a trunked system!

i am gonna need to pick up those big boys when you drop them!

Z series. What are you owned by Pioneer?

Haha, no

Using the same letters as the amps...

I will have E, X, and Z series woofers when the lines fill out.

These are great sounding drivers too Dizzle, not just SPL

Frequency range?

Enclosure Specs?

Z series. What are you owned by Pioneer?

Haha, no

Using the same letters as the amps...

I will have E, X, and Z series woofers when the lines fill out.

These are great sounding drivers too Dizzle, not just SPL

No ''S'' or ''A''

u know how i feel about this lovely piece of mechinary

80

Awesome, might have to look into these. Your company is going great places Jacob!

Z series. What are you owned by Pioneer?

Haha, no

Using the same letters as the amps...

I will have E, X, and Z series woofers when the lines fill out.

These are great sounding drivers too Dizzle, not just SPL

No ''S'' or ''A''

Actually... I am working on an "SA" series

Just not going to go into too many details since I don't have any ETAs on this stuff yet.

Boom.

Whatever happened to the X series?

Good job

i'm just wondering

what number woulds the nightshade put on the screen with that setup?

Is this the Z series SQ line? Or is one of the other lines more designed for SQ oriented applications? Im wanting a couple Sundown SQ drivers badly for a sealed project in the near future.

Is this the Z series SQ line? Or is one of the other lines more designed for SQ oriented applications? Im wanting a couple Sundown SQ drivers badly for a sealed project in the near future.

No.

There will be a line designed for SQ oriented.

I think its the X. Im not 100% though.

i'm just wondering

what number woulds the nightshade put on the screen with that setup?

I would try it but they won't fit in my box.

I need to add a third layer to the top so the magnet will not hit my port

The "monster" sub is about 1" shallower than the Nightshade so it fits, as is the Z series.

Is this the Z series SQ line? Or is one of the other lines more designed for SQ oriented applications? Im wanting a couple Sundown SQ drivers badly for a sealed project in the near future.

Z series is more of a flexible sealed / ported "good sounding" type driver - Qts and Fs specifications are similar to SI Mag v.3 (old version), similar internal motor geometry too

X series will be my sealed box SQ style driver - I took a different direction from earlier prototypes here

If you want a sealed SQ woofer right now I would suggest the SI Mag v.4

Z series is more of a flexible sealed / ported "good sounding" type driver - Qts and Fs specifications are similar to SI Mag v.3 (old version), similar internal motor geometry too

X series will be my sealed box SQ style driver - I took a different direction from earlier prototypes here

If you want a sealed SQ woofer right now I would suggest the SI Mag v.4

Ill just hold off until the X is released. I want to keep this an all Sundown project as much as possible. Hopefully it wont be long off...

Where is the rear shot??? :D

Where is the rear shot??? :D

* Z15 / Nightshade 15 side by side

Another sexy ass from Jake. "Looks" similar to the old triple stack TC9 variant. I'm sure its not the same but I figured I would get it out of the way first.