Posted March 9, 200916 yr Building a new box for my 15" nightshade. Going to be running (3) 4" external aeros and was thinking about ~2-2.5 cu ft before displacement.. Will be testin different port lengths after I get the box built to see what does the best. Any input?
March 9, 200916 yr Hopefully 3000rms of clean power. LolWhat kinda of clean power is it a calss A-Bnoo...... :Doh: A clean not distorted non clipped signal.
March 9, 200916 yr Hopefully 3000rms of clean power. LolWhat kinda of clean power is it a calss A-Bnoo...... :Doh: A clean not distorted non clipped signal. So in other words you will be running the amp properly lol no offence
March 9, 200916 yr Hopefully 3000rms of clean power. LolWhat kinda of clean power is it a calss A-Bnoo...... :Doh: A clean not distorted non clipped signal. So in other words you will be running the amp properly lol no offenceAnd the H/U set properly, with good grounds/power, and wiring. then YES the "amp" properly
March 9, 200916 yr Hopefully 3000rms of clean power. LolWhat kinda of clean power is it a calss A-Bnoo...... :Doh: A clean not distorted non clipped signal. So in other words you will be running the amp properly lol no offenceAnd the H/U set properly, with good grounds/power, and wiring. then YES the "amp" properly nice it always better when the amp is running right. I blew lots of subs last summer because I didn't know my A$$ hole from my elbow lol
March 9, 200916 yr Author sundown 3000d! I hade Mike465 off ca.com build me a slot port of 3 cube at 36 hz but it only hit a 143.9 off a 38 hz tone so I am going with a different box design to see if it will get louder. Its a 3000d running off (2) deka 9a31, (2) runs of 1/0 and an exide orbital replacin stock batt.
March 9, 200916 yr sundown 3000d! I hade Mike465 off ca.com build me a slot port of 3 cube at 36 hz but it only hit a 143.9 off a 38 hz tone so I am going with a different box design to see if it will get louder. Its a 3000d running off (2) deka 9a31, (2) runs of 1/0 and an exide orbital replacin stock batt.Damn I'm good! lol :bigclap:
March 9, 200916 yr What kind of car are you putting it into? I'll give you a design that I guarantee will do over a 143.9
March 10, 200916 yr How do the Alpines like the 125.4?I am in the market for ALL new speakers. And need something that sounds good and can take the power of my 100.4
March 10, 200916 yr Author It's only a 125.2, I am selling them and going to get some CDT or PG or something. They are only rated for 75 rms at 4ohm and the amp is rated 125 at 4 so I need some that can take some more power.
March 10, 200916 yr any suggestion?Do you want me to design you a box? If so pm me and I'll get started on it tonight.
March 11, 200916 yr Author I appreciate it but I can design one that will work I just didnt know if I should make it closer to 2 cubes or 2.5 cubes??
March 18, 200916 yr i built mine right at 3.66 cubes with two 4in. arrow ports tunned to 34hz :bigclap: and yes i can be herd before i am seen.