i have an sax 100.4 and i have 2 pair of alphasonik pct6551 3way components,2 for the front and 2 for the back there are rated at 350 watts rms would the amp be powerful enough to power the components. or should i sell them and get a lower rated component set?

Edited March 11, 200916 yr by jfin1204

It is an SAX-100.4

And, remember the amp is well underrated.

Rated power output

----RMS power, 4 ohm stereo

100W x 4CH

----RMS power, 2 ohm stereo

160W x 4CH

----RMS power, 4 ohm bridged

320W x 2CH

Edited March 11, 200916 yr by bassahaulic

It is an SAX-100.4

And, remember the amp is well underrated.

Rated power output

----RMS power, 4 ohm stereo

100W x 4CH

----RMS power, 2 ohm stereo

160W x 4CH

----RMS power, 4 ohm bridged

320W x 2CH

did you say 160 watts rms x4 channels@4 ohms. because im putting a 3way per channel @ 4 ohms.

Edited March 11, 200916 yr by jfin1204

It is an SAX-100.4

And, remember the amp is well underrated.

Rated power output

----RMS power, 4 ohm stereo

100W x 4CH

----RMS power, 2 ohm stereo

160W x 4CH

----RMS power, 4 ohm bridged

320W x 2CH

did you say 160 watts rms x4 channels@4 ohms. because im putting a 3way per channel @ 4 ohms.

It does 160+ out of each channel at 2ohm.

It will push them fine with 100 rms though.

sorry i read that wrong i understand, but what is it really rated at, at 4 ohms x 4 channels.

^^ About 125w

sorry i read that wrong i understand, but what is it really rated at, at 4 ohms x 4 channels.

At 4 ohms, it will do 100+rms out of each channel.

have you heard good or bad about alphasonik

Never heard their mids/highs to be honest.

that amp will do great on the speakers.

alphasonik has been around in the car audio game before a hell of a lot others. Great stuff, now buy that 100.4.

already bought the amp and own the components just dont know if i should sell the components. and buy new ones.

speakers don't have to get their RMS rating.