Jump to content
View in the app

A better way to browse. Learn more.

SSA® Car Audio Forum

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Featured Replies

Posted

my amps protection light blinks on then goes off then when i turn the song it happens the arc of high amp electric its random it just starting doing it i had it installed for a few weeks sae1200 extra batt stock alt

  • Author

my amps protection light blinks on then goes off then when i turn the song it happens the arc of high amp electric its random it just starting doing it i had it installed for a few weeks sae1200 extra batt stock alt

i have the main power run to the batt up from to the one in back then the batt ground to the chassie then the amp gets power and ground from the batt in the back and when it snaps its only for a sec and it comes right back on

Well first have you checked all the wires to make sure they are connect securely?

  • Author

i had this installed for a few weeks cheapo sony headunit,1 extra battery,stock alt,sae1200 playing at 2ohm ,1 15btl. just yesterday it started to do that snap sounds like a m80 in the truck and you can see the arc in side the amp. when it snaps its only for a sec then comes back on. all my connections are tight and secure, it only does it mostly when i change the song mp3 cd at high levels and randomly. the protection light bilnks when it plays but does not turn off the amp. i dont know if this would do anything but installed a volt meter from ebay http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItemDescV4&s2=0&c=2#ht_1752wt_961 i got the meter ground with the headunit same with the acc power. the signal comes off the main power run the ground for the signal wire is with the headunit ground. but i unhooked the signal from the power it still snaps i don.t think that has somthing to do with it

A board trace may be hitting the case -- you should send it to dB-R to check it out.

  • Author

ok i opened it up and found this blown up Photo0086.jpg

ok i opened it up and found this blown up Photo0086.jpg

Send that amp to db-r as Jake suggested.

  • Author

thats sucks just got this amp new little over a month ago. i still got warranty on it so how do i go about getting it fixed???

thats sucks just got this amp new little over a month ago. i still got warranty on it so how do i go about getting it fixed???

I just stumbled across this thread and I have never done business with sundownz OR DB-R but since I can read my guess would be what Jacob as well as another member here suggested... Send back to DB-R FTW. If it were me, I'd go to their website http://www.db-r.com/sell/store/. Then I'd look to the lower left hand portion of the site under "information" and click "contact us". Then I would proceed to describe what happened and ask what I need to do to send the amp in for repair or replacement....... but that's just me.

Send it along w/ your invoice to dB-R Electronics and we'll get it fixed up !

  • Author

Send it along w/ your invoice to dB-R Electronics and we'll get it fixed up !

I will send it tomorrow

Guest
This topic is now closed to further replies.

Recently Browsing 0

  • No registered users viewing this page.

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.