Posted October 13, 200915 yr Okay so im hooking up my new system and i dont know what to get for my fuses or my distribution block. Im going to run 3 amps connected to a powermaster D1200 battery. An alpine 650 mono, 2 channel Rockford punch 550x2, and a Sundown SAE 1200D. What distribution blocks would work? Fuses? Gauge sizes? How would i hook up the battery to the amps and other battery? Anyway, any help will help. Thanks everybody.
October 13, 200915 yr since you are running 3 diffent amps i would recommend using this fused distro, i have in the past and it works quite nicely and very easy to installhttp://www.knukonceptz.com/productDetail.cfm?prodID=KNF-23i would use 4gauge for all 3 amps and use 1/0 into the fused distro.as for fuse sizes i like to match the fusing on the amp its self. so if the sae1200 has 90 amps of fusing then use a 90amp fuse! just look at the amps and add up there fuses to get a total number and use that to determine what to fuse each lead from the distro block! as for hooking up your d1200 just hook it in parellel to the front battery (positive to positive and negative to negative) and be sure to use 2 fuses on the run of positive wire! one fuse holder near each battery to be safe! and i would recommend using 1/0 wire to wire the batteries up. the more runs the better as long as you can fit them all!!here is the fuse hold i use and i like to use a 250-300 amp fuse in it!http://www.knukonceptz.com/productDetail.cfm?prodID=FH-20any more question please feeel free to ask and also don't forget to do the big 3!!enjoy
October 13, 200915 yr 550,550,600, & 1200???One too many mono amps there...don't do it.He only has three amps but they are all mono, he was just saying 550x2 (how much power per channel). What all equipment will you be running to these amps?
October 13, 200915 yr his fosgate is a 2 channel, but Im a little curious to what the two different mono amps are for? only thing I could think of is the alpine on some beastly midbass drivers, but youd want them in stereo wouldnt you.
October 13, 200915 yr Author 550,550,600, & 1200???One too many mono amps there...don't do it.He only has three amps but they are all mono, he was just saying 550x2 (how much power per channel). What all equipment will you be running to these amps?Okay so i cancelled the alpine 650 and went with an older amp i found in my closet. Its a TMA 250. So I'm going to run that Sundown to my sub, the TMA to my front drivers, and the Rockford 2 channel to two Wake board tower speakers put up in the back. I'm having a bar welded in the back so they can hang. http://www.sonicelectronix.com/item_7142_Infinity+6000M.html There is the link to the speaks. Will that work? The only thing is is that i don't know drivers to run in the front? its a 97 4runner. any ideas?
October 13, 200915 yr I know its to each its own, but why those and in your car? If your just looking for loud all around there are other things out there to get the job done.
October 13, 200915 yr Wake board speakers?.....WOW!! I'm sure someone here could help you find something better as well.
October 14, 200915 yr Author im going to be runing about 2000 watts should i get an Optima yellow top? http://shop.optimabatteries.com/products/productdetail/part_number=D35/1737.0 Let me kno what you think.
October 14, 200915 yr Capacity (c/20 rate) 48 Cold Cranking Amps 620 Cranking Amps 770 Post Type SAE Post Reserve Capacity 100 umm you might need more CCA (cranking amps lol) maybe get a XS power d3100 or the d2700 d2400 or even the 5100. or a kinetik hc2000 or hc2400!! or 2 of those yellow tops! l;)wait 2000watts or rms? Edited October 14, 200915 yr by CrazyKenKid
October 14, 200915 yr im going to be runing about 2000 watts should i get an Optima yellow top? http://shop.optimabatteries.com/products/productdetail/part_number=D35/1737.0 Let me kno what you think.More info will be needed besides Im running 2000 watts, what battery will be needed. Read noob posting guidelines so you have an understanding on how to get accurate answers and the most positive feedback.
October 14, 200915 yr 550,550,600, & 1200???One too many mono amps there...don't do it.He only has three amps but they are all mono, he was just saying 550x2 (how much power per channel). What all equipment will you be running to these amps?Okay so i cancelled the alpine 650 and went with an older amp i found in my closet. Its a TMA 250. So I'm going to run that Sundown to my sub, the TMA to my front drivers, and the Rockford 2 channel to two Wake board tower speakers put up in the back. I'm having a bar welded in the back so they can hang. http://www.sonicelectronix.com/item_7142_Infinity+6000M.html There is the link to the speaks. Will that work? The only thing is is that i don't know drivers to run in the front? its a 97 4runner. any ideas?Would it work, sure. Does it make sense? No way.
October 14, 200915 yr Author 550,550,600, & 1200???One too many mono amps there...don't do it.He only has three amps but they are all mono, he was just saying 550x2 (how much power per channel). What all equipment will you be running to these amps?Okay so i cancelled the alpine 650 and went with an older amp i found in my closet. Its a TMA 250. So I'm going to run that Sundown to my sub, the TMA to my front drivers, and the Rockford 2 channel to two Wake board tower speakers put up in the back. I'm having a bar welded in the back so they can hang. http://www.sonicelectronix.com/item_7142_Infinity+6000M.html There is the link to the speaks. Will that work? The only thing is is that i don't know drivers to run in the front? its a 97 4runner. any ideas?Would it work, sure. Does it make sense? No way.All im trying to do is to have speakers loud enough to hear over the sub. So i thought that two tower speakers would do the trick. Any other ideas? I hate music when its straight bass. I like being able to hear the lyrics.
October 14, 200915 yr put a pair of COMPONENT speaker in your doors! or even those HORNE tweeters!!! and give them about 100rms and you will be like woow i can hear the music and the bass!!! and if you need a pair of comps i will be selling mine soon lol!!!
October 14, 200915 yr 550,550,600, & 1200???One too many mono amps there...don't do it.He only has three amps but they are all mono, he was just saying 550x2 (how much power per channel). What all equipment will you be running to these amps?Okay so i cancelled the alpine 650 and went with an older amp i found in my closet. Its a TMA 250. So I'm going to run that Sundown to my sub, the TMA to my front drivers, and the Rockford 2 channel to two Wake board tower speakers put up in the back. I'm having a bar welded in the back so they can hang. http://www.sonicelectronix.com/item_7142_Infinity+6000M.html There is the link to the speaks. Will that work? The only thing is is that i don't know drivers to run in the front? its a 97 4runner. any ideas?Would it work, sure. Does it make sense? No way.All im trying to do is to have speakers loud enough to hear over the sub. So i thought that two tower speakers would do the trick. Any other ideas? I hate music when its straight bass. I like being able to hear the lyrics.Read the pm (personal message) I sent you. Check out madisound.com or parts-express.com for speakers and tweeters or you might need to invest in a pair of horns (Image Dynamics, they get loud off of low power from what I heard.
October 14, 200915 yr Author put a pair of COMPONENT speaker in your doors! or even those HORNE tweeters!!! and give them about 100rms and you will be like woow i can hear the music and the bass!!! and if you need a pair of comps i will be selling mine soon lol!!!Awesome thanks man.
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.