ok since i cant cut outside at my place to work on nicks car ive been goin over to my team leaders house from work and working on his install of all the stuff he has bought off me over the past few months.

i won a pair of square brutus 12s and a brutus 1200w amp at the maxxonics show and i sold him the package and told him i would do his install for him.

Equipment

HU- Pioneer 7800mp

Subs - Hifonics Brutus 12s

Sub Amp - Hifionics Brutus 1200w amp

Mids/Highs - Memphis M class 6.5" coaxials (2 pair)

Mids/Highs Amp - JL Audio 300/4

RCA's/Power Wire - Knukonceptz

Extra Battery - Kinetik HC2400

been working on it for 4 nights now about 3 hours a night from like 3am till 6am. this box could NOT have been any bigger than it is and still be able to fit it in the car. had to take off the back door haha. We had Home Depot do all the cuts for us so we didnt have to bother doing it ourselves haha.

ok pics. keep in mind i havent taken pictures of everything but its just some that i have.

AHHHH HEAT!!!!!

start of the box

OOOO and the money shot

OH btw the shell of this enclosure is 8.8 cube total. it probably doesnt look like it in the pics but its a pretty big box for a small 4 door cobalt. we litterally had to cut a very small part out of the back deck. take the door off and jam it through cuz it was barely small enough to fit from every different angle. box goes from the VERY back of the trunk all the way to the front. it was a chore but some how i measured it perfect to be able to fit

good looking work so far bro. that is smooth how you got the box in there.

can't wait to see it all put together.

keep up the good work

chop

is that 3/4" birch?

The door!

yah there was no other way to make an 8.8 cube box fit into that car since the trunk opening on that car is UBER small

here is what the box will end up looking like

Im tuned in, keep us posted.

got quite a bit done today so i took some pics. im still messing with the port to get best output but right now it sounds great. im gonna bring my meter to his house tomorrow night and get to trying some different things out. right now i LOVE the way it sounds for having cheaper subs and only a 1200w amp. no idea number wise what its hitting but my goal is to hopefully hit between a 44-46 on music

FYI i HATE! using this JL Audio amp because they way the connections and stuff is faced.

so i did some port mods and stuff and it sounds GREAT but not very impressed by the number its putting up. it managed to only pull a 140.4 at 40hz. i put the meter in the box and it did a 156 at 40hz and a 158.1 at 69hz.

didnt take any pics but we foamed around the box and some minor spots in the back deck.

o well its a good thing this is just a daily driver so at least it sounds good. it does a 139+ from 38hz to 48hz so it sounds good on about everything. but the subs are barely moving

This is a really nice build you have going here. Im likin it. Is that 3/4" birch, like Chop asked? Ive always wanted to use it but mdf sheets are expensive enough!

nah its 23/32" plywood. its cheaper than mdf.

Now that I go back and look at the later pics I can see a profile of it and the layers are evident. Those first couple of pics with the grain shots threw me off for a second. Looks awesome dude!

welp almost done just need to fill some screw holes in and coat the inside of the port with bedliner and it will be complete. i will take some vids of it when we get it complete. threw something in the port today and wow i was impressed by how much air it does move.

What did you cover it with if you dont mind me asking since I cant tell from the picture? I love this design man, keep up the good work.

black vinyl