Okay, so my friend just got his ava 18 installed and its purdy loud, I've liked what I've listened to so far. Its on about 1000/1200 RMS.

My question is, to get louder should I....

Get an MT 15 ported on 3krms

or

Get two Rl-p 15s ported on 2krms

Also, its pretty much a given that either of those would be louder than his 18...wouldn't ya say?

Propsed box for the Rl-P 15s is a true CRX style box, two chambers, subs up, ports back, 2 4" aeros per chamber, 3 cubes net each tuned to 34hz

I dunno, when I think Dual 15s CRX style in a hatch...I think LOUD.

Thoughts/opinion/ramblings. Just respond...I'm tired...intoxicated, and about to pass out. Yet I still post...YOUR TURN

Dual RL-p's would be plenty loud

The dual 15 setup gives u the most cone area. Cone Area + CRX Box = loud as f#$k.

The DUBurban got plenty loud with the dual Brahma 15's in it

Messed around with the box design some more.

How does 3.2 Cubes NET @ 32.6hz per 15 sound???

Talk to Jellyfish... he has run the 15's in a bunch of different enclosures.

Talk to Jellyfish... he has run the 15's in a bunch of different enclosures.

plus he has them for sale cheap, check for sale section

I really just need some gut wrenching gurantee that these babies will be loud enough. I know thats hard to give, but I hate to spend all this money and get too disappointed.

My loudest system was 6 RE8s ported, around a 142 legal.

I'm considering using a Modded MTX1501D on these subs instead of an Opti2000D. ~700 RMS per sub is enough to get them LOUD like I want right?

chit, I should just spend the money and STFU

700W should get them plenty loud in the proper enclosure.

spend the money...you know you want to

well there is loud to the ear and loud to the mic

I really just need some gut wrenching gurantee that these babies will be loud enough.  I know thats hard to give, but I hate to spend all this money and get too disappointed.

My loudest system was 6 RE8s ported, around a 142 legal.

I'm considering using a Modded MTX1501D on these subs instead of an Opti2000D.  ~700 RMS per sub is enough to get them LOUD like I want right?

chit, I should just spend the money and STFU

a pair of 15" rl-ps off 1400+ wrms in the right box...yeah...u'll get loud..lol....

i'd suggest a box in the 2.5-2.75ft^3 range tuned to 32-34 hz with 25-30in^2 of port per 15...adn u'll be low and loud....

and sound really good doing it too!!!

wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

you actually want louder than an Ava18 for daily? are you insane or something?

anyway. I'd put my money on the MT as far as loudness is concerned but if i where you id get the Rl-P's so you'll sound good too...

COOLNESS

80

if u want loud do a bandpass but tune it to around 35hz and your good 2 go

80

if u want plans pm me

w/ 1500-2000w i'd do 2.75-3ft net per sub @ ~35Hz w/ say 35-40in^2 port.

^ Thats probably what I'll end up doing, just a little lower, like 33hz because I like my lows :-D