April 29, 201015 yr it's now sealed with around 3.25 per sub and it's digging low .... i love that but there's a huge difference in overall output, i'll keep it this way for a week or two and then i'll decide if i want to go ported again but tuned lowerBTW excursion is now totally sick, freaking sick. it looks alot cooler than ported. i wanted to make vids with my cellphone but it just won't pick it upIt's going lower ? Damn !!!The huge difference in output is annoying, but I will try it.I will build a sealed box for my 15" xcon. I will tell you how I feel from a 3.5 cu ft ported box to a 3 cu ft sealed box. I'm running mine with a Sundown saz 1500 d.
April 29, 201015 yr Admin it's now sealed with around 3.25 per sub and it's digging low .... i love that but there's a huge difference in overall output, i'll keep it this way for a week or two and then i'll decide if i want to go ported again but tuned lowerBTW excursion is now totally sick, freaking sick. it looks alot cooler than ported. i wanted to make vids with my cellphone but it just won't pick it up
April 29, 201015 yr Yea they get louder, but they sound so damn good sealed it's a hard choice to make. More power?Edit - you have good power, didnt see that.
April 29, 201015 yr Author adding two more and removing the backseat would be the only option left but this is my daily, i don't need a trunk but i need my backseat Edited April 29, 201015 yr by xprime4
April 30, 201015 yr Semi-wall? You can fabric a wall in the trunk, at rear of your seat and still got the backseat.you can build your box higher, sealed them from the trunk and put your amp at rear of your box but that story sound heavy for a XD2.. Edited April 30, 201015 yr by polkfan
April 30, 201015 yr Author Semi-wall? You can fabric a wall in the trunk, at rear of your seat and still got the backseat.you can build your box higher, sealed them from the trunk and put your amp at rear of your box but that story sound heavy for a XD2..hi there
May 1, 201015 yr Author something bad happenned today while i was abusing the lowend of my oversized sealed box... one of the cone kinda melt... yeah it melted!!! i don't know if i'm the only responsible for this, the other sub wasn't really hot and the "blown" one was damn warm to the touch...i'm gonna take them out tommorow, recone time...big sealed + much power + lowend abuse =
May 1, 201015 yr something bad happenned today while i was abusing the lowend of my oversized sealed box... one of the cone kinda melt... yeah it melted!!! i don't know if i'm the only responsible for this, the other sub wasn't really hot and the "blown" one was damn warm to the touch...i'm gonna take them out tommorow, recone time...big sealed + much power + lowend abuse = Could you post pics of the melted cone?
May 1, 201015 yr Author something bad happenned today while i was abusing the lowend of my oversized sealed box... one of the cone kinda melt... yeah it melted!!! i don't know if i'm the only responsible for this, the other sub wasn't really hot and the "blown" one was damn warm to the touch...i'm gonna take them out tommorow, recone time...big sealed + much power + lowend abuse = Could you post pics of the melted cone?i will tommorow.....does ssa do recone? Edited May 1, 201015 yr by xprime4
May 1, 201015 yr Author i can't wait to take them out and inspect them. i just don't get how one of the two subs fail like that and the other was barely hot. it didn't smell coil either, just a little smoke and i light scent. i never blew sub, it just failed too quick, just wondering whybtw the coils wer kinda dark on both sub and each tinsels looked weird when i first got them . they were used what is the coil "natural" color? gold or brownish? Edited May 1, 201015 yr by xprime4
May 1, 201015 yr That's correct, they are gold/brownish colored. A burnt coil is dark brown/black and has a distinctive smell. Test the resistance of each coil at the terminals, there could be a short in the tinsel leads under the dust cap, that can cause the dustcap to melt.
May 1, 201015 yr Author That's correct, they are gold/brownish colored. A burnt coil is dark brown/black and has a distinctive smell. Test the resistance of each coil at the terminals, there could be a short in the tinsel leads under the dust cap, that can cause the dustcap to melt.dustcap wasn't that hot in the middle , just on the burnt side 3inch away from cone center
May 1, 201015 yr Only one burned? Did you possibly wire each one differently than the other? If one was receiving more power that would cause it to burn faster than the other.
May 1, 201015 yr Author ... spider problem hereand the conesad sad day... but i'm wondering why the other is still in good working condition. my dmm batt is down i can't check the coil atmwaiting on a recone quote, and this will be my first recone
May 1, 201015 yr Author i just put the sub in a box i had so the working one is in 4.3 net @34hz and it sound pretty great. i'm glad there's still one working while i'm waiting for a recone. Edited May 1, 201015 yr by xprime4
May 1, 201015 yr Looks like it was moving a little too much to rip the spiders.Not sure on the dust cap melting. Curious to what those coils read.
May 1, 201015 yr Author well finally it seems like the tinsels are burnt.the spider ripped just over the tinsel, wtf happened?
May 1, 201015 yr Admin That appears to be a mixture of clipping, and driving them past their limits. We have never had an Xcon look like this that I know of. I got your PM, we can arrange a recone, but first the cause of burning up such overbuilt sub woofers needs to be corrected before putting them right back in.
May 3, 201015 yr Author isn't it strange that only one of the two "blew up"? i wasn't powering them that much.... i'm pretty sure there was no clipping , voltage was still pretty high when the tinsel burnt.... and the sub was already kinda "rattling" when i put my ear next to it.... kinda mechanical noisestill waiting a on recone kit quote Edited May 3, 201015 yr by xprime4
May 3, 201015 yr Admin isn't it strange that only one of the two "blew up"? i wasn't powering them that much.... i'm pretty sure there was no clipping , voltage was still pretty high when the tinsel burnt.... and the sub was already kinda "rattling" when i put my ear next to it.... kinda mechanical noisestill waiting a on recone kit quoteThe second one seems to be very close to failure, and I would suggest reconing both. For us to never have had a thermal failure before under normal conditions on an Xcon, even thumper that beats the living snot out of every driver he uses, has not made an Xcon reach thermal failure, there has to have been something in terms of the gains or signal clipping in there somewhere. Not to mention, to get a driver with such a heavy duty suspension to reach mechanical failure, it is surprising. No big deal, just have to adjust settings and they will be fine. Part of the reason the Xcon has outsold our Icon 4-to-1 is due to the sheer amount of abuse it can take under normal conditions. I did not get back to your PM yesterday as I was away from a computer all day and on the road a bunch, and I cannot answer emails on my phone while driving in the state of MD anymore due to the new texting and talking laws against cell phones while driving. But I am still doing my damnedest to answer messages and emails 7days a week.In the reply I just sent, I explain about the warranty issue with the end user doing the recone.
May 3, 201015 yr Author i'd be surprise there's clipping in the way as it's pretty much set the same way for every driver i use and that one seems kinda suspicious from the start. like i said, i wasn't really bumping that hard and my voltage was barelly dropping, i just mess with the wrong track in the wrong box..... the ex-owner haven't pm me back either......it's still a nice driver, i really love the way it covers a nice range that flat. it sound so much better than the18 inch Q i had few year ago. i'm just wondering if i should call one or two recone as the other one was probably abuse too.... but it looks fine and play fine so farsorry if i'm annoying denim, i just want them to work again together soon... Edited May 3, 201015 yr by xprime4
May 4, 201015 yr Admin You are not annoying at all. I just want to make sure you only have to recone once. You got PM.
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.