Jump to content
View in the app

A better way to browse. Learn more.

SSA® Car Audio Forum

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Featured Replies

Posted

i'm gonna be feeding each of my 12" rl-p's about 1200 watts rms a pice and want to build a sealed box. i'm thinking 1 cube each will work well. what do you guys think?

iceteebone! First off, allow me to thank you for the name-dropping you do around the various forums when people are looking to work a driver into an application that the RL-p will excel in, I really do appreciate it and am very happy that you are happy with your RL-pizzies! tongue2.gif

That said, I think you're on the right track and that the 1 cu ft net volume (1.18 cu ft gross internal) would be a good place to start given the ungodly amount of power you are throwing at that poor little RL-p wink2.gifthumbup.gif

You might even consider movin' up to 1.2 net if you want a little more extension down low, along with a little more output up high - but it's all up to you, with that amount of power the 1.0 net should do ya well.

1.25 sealed will rock your world with 1200 watts, dude. Carefull with the gains though, with that much power on tap, clipping can kill your sub quick.

  • Admin

I like what finebar suggested

  • Author

what if i made it 1 cube per sub and added polyfill? i would really like to gain as much room as possible in my trunk.

It could work, but you will give up some low-frequency extension along with overall output.

I would strive for at least 1.2 cu ft gross internal volume w/ 1 to 2 lbs polyfill.

  • Author
It could work, but you will give up some low-frequency extension along with overall output. 

I would strive for at least 1.2 cu ft gross internal volume w/ 1 to 2 lbs polyfill.

i can do 1.1 cubes (that is after the driver displacement) and then add a pound or 2 of polyfill to each chamber?

my rl-p 12 sounds amazing in 'about' 1 cube.have no fear ice, its gonna sound real nice ,get plenty low and be loud.even in a small box!

  • Author
my rl-p 12 sounds amazing in 'about' 1 cube.have no fear ice, its gonna sound real nice ,get plenty low and be loud.even in a small box!

i know they can get loud. i used to have them ported in my jeep run off a pg tantrum 1200.1. now i have a car and want a smaller box.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

Recently Browsing 0

  • No registered users viewing this page.

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.