how many cu ft? tuned to?

Looks good so far. Cant wait to see the finished product.

2.3cuft tuned to 33hz

Personally i would have probably doubled the port area, but it should be a sick setup anyhow. What kind of amp are you running?

that port area seems really really small.

Looks good man! I'd probably put more port area in mine but it still looks good! Also, if you have the tools available I recommend rounding off the end of the port area with a router or something. Helps with the port noise

Bracing is good to if you wanna be troubled for it, and doubling the baffle is good as well.

I didn't realize I was gonna say all that. But hey, constructive critism for you

looks like a 1inch port you should have gone with 2.5 or 3inch in width

Box looks fine man.

And for all you people claiming "To small port"

If you would take into consideration the wood is .75" wide and the port is clearly larger then a single piece of MDF. Looks to me like it's at the very least 2.25" wide and as tall as the box is.

So with a 12" going into the box, it at the the least would be 13" in between the top and bottom layer of MDF.

So, 2.25 x 13" = 29.25^2 of port. More then enough.

The port will suffice, but more would not hurt