Posted September 9, 201015 yr Ok so i bought 2 of these off a guy that got a whole shipment from jacob. He reconed them and sold them. My concern is i asked them to be dual 2 but when i put them on a DMM i get 1.5 per coill. Both subs are like that. My question is do the D2s have that low of impedance or did i get D1.5s Edited September 9, 201015 yr by DSKtim
September 9, 201015 yr You measured the direct current resistance, not impedance.You have D2 ohm coils.
September 9, 201015 yr Author ok thank you so how do i measure the impedance verse resistance and how would i wire them Edited September 9, 201015 yr by DSKtim
September 9, 201015 yr You don't measure nominal impedance with a DMM For the purpose of wiring to your amp assume they are 2 ohms per coil.And yes, they are 1.5 DCR -- your DMM is reading spot on.