Posted October 9, 201014 yr I've got an aa avalanche 18 d2 that was reconed by PSI. A behringer ep2500, behringer feedback destroyer pro, and Sampson s convert. I finalized my build plan. The box will be 24" deep, 22" tall, and 96" wide. Sub will have a double baffle and be mounted in the center front of the box. With dual slot ports. One on each side. It will be under my screen firing at the audience. It'll be 21.5 cu ft net tuned to 15 hz. With 92 sq in of port area. I'll post up a sketch of my floor plan and sketchup pics of the box and bracing.
October 9, 201014 yr Author Thanks guys. Hopefully I'll get started next week. I'll post up once I get going.
October 9, 201014 yr Hows the output going to be firing towards the audience vs down firing? I just ask because I thought downfiring and using the floor to unload on works best for HT. sketchup model looks awesome, especially all the bracing
October 9, 201014 yr Author Just curious, but what are yo useing for the fronts?I've got a set of wharfedale zaldek towers. They sound pretty good and will get used untill i can afford to build a set.
October 9, 201014 yr Author Hows the output going to be firing towards the audience vs down firing? I just ask because I thought downfiring and using the floor to unload on works best for HT. sketchup model looks awesome, especially all the bracing I would probably get more output that way. This isn't the optimal location for the sub. But it was the best compromise to fit with everything else. And even not being optimally placed it should still be more than I need.
October 9, 201014 yr Author hey fatty, what happrn to the fireplace? The chimney is cracked. It was like that when I bought the house. So it's been sealed up for a few years. I was going to put in a gas insert, and Sheetrock over the ugly brick and wood paneling. And then I decided to go a little crazy with the home theater instead.
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.