Any updates on this?

Now thats a Donk

Any updates on this?

rene, how do you think these would work in ADT's double 8" competition car?

i see kevin @ skar has got his 8 on the way and priced under the sa wtf.

i see kevin @ skar has got his 8 on the way and priced under the sa wtf.

Entirely different drivers tend to be priced a little differently.

Any updates?

i see kevin @ skar has got his 8 on the way and priced under the sa wtf.

... and ?

i see kevin @ skar has got his 8 on the way and priced under the sa wtf.

it just seems like he's under cutting you and it looks alot like the e8 with a bigger motor

... and ?

and maybe you could shed some light on why you would help him develop a line that is supposed to be better on the bottom and be a little bit cheaper than the sa line

The driver is significantly different from both the E8 v.2 and SA-8 -- there is plenty of room in the market for drivers with various applications.

The driver is significantly different from both the E8 v.2 and SA-8 -- there is plenty of room in the market for drivers with various applications.

it's your wallet.

OEM work is commonplace in the industry -- but you usually don't know who is doing the work. For example... TC Sounds made woofers for countless companies; RE used to be an OEM provider; Fi/AA currently do OEM work, etc.

The markets for our products in the end are quite different as are the designs of the Skar woofers compared to our own so I am not concerned for my wallet so to speak

OEM work is commonplace in the industry -- but you usually don't know who is doing the work. For example... TC Sounds made woofers for countless companies; RE used to be an OEM provider; Fi/AA currently do OEM work, etc.

The markets for our products in the end are quite different as are the designs of the Skar woofers compared to our own so I am not concerned for my wallet so to speak

ah i get it. where you at on the x 8. oh and im sure your wallet is fine

I am waiting on a status update on the X-8 frame tooling -- once the frame is done we'll be much closer to a final prototype as the motor won't take long at all to machine up.

The soft parts hit a set-back that I was notified on 4/4/11 -- I was told about ~8 weeks which should be any time now I think; as long as the recovery effort of the manufacturer in Japan was a success.

I am also considering a less extreme new frame tooling for the SA-8 v.2 model -- which would leave only the E8 v.2 with a "stock" frame

I am waiting on a status update on the X-8 frame tooling -- once the frame is done we'll be much closer to a final prototype as the motor won't take long at all to machine up.

The soft parts hit a set-back that I was notified on 4/4/11 -- I was told about ~8 weeks which should be any time now I think; as long as the recovery effort of the manufacturer in Japan was a success.

I am also considering a less extreme new frame tooling for the SA-8 v.2 model -- which would leave only the E8 v.2 with a "stock" frame

i can't wait i got some w7 to pick on.haha

any new updates ?

any new updates ?

Check his facebook there's a new frame design on there.

The X-8 is separate from the new frame I put on Facebook; the Facebook frame is for the SA-8 v.2

bet this will be a monster (in the smallest sense)

looking forward seeing testing vid's / demo of these

does this mean there are going to to be new frames with bigger spiderlandings for the 10's 12's and 15's too?

Edited August 25, 201114 yr by BASSmaster

The X-8 is separate from the new frame I put on Facebook; the Facebook frame is for the SA-8 v.2

Oh my mistake.

does this mean there are going to to be new frames with bigger spiderlandings for the 10's 12's and 15's too?

does this mean there are going to to be new frames with bigger spiderlandings for the 10's 12's and 15's too?

Dun dun duuuh!

the day pre order is aval for these im on deck for 4! originally was gonna hold out for em but decided to swoop 4 sa8s untill then..

well i cant wait ... im going to upgrade my sa-8's to these bad boys !!

Any updates on these bad boys

Still no new updates. Haven't forgotten about the project but it's heavily delayed -- until then we have the SA-8 v.2