I just installed the digital knukonceptz distribution block and connected a line for the ground so the digital display can work. My question is how long should the display stay on? Its been about 15min and its still on.

I looked up the product and it didn't really say much. My assumption though is that it is a voltage monitor.. To me that means it will always be on...

I assume that is gonna drain battery over time....

The amount that will be drained is so small that it would take many days of sitting to cause any type of problem for you.

so it was on for 15min after shutting off the car??? Not sure mate... But it shouldn't really cause you an issue... Is there a lead/connection for remote turn on???

Sorry Iwent for some beer, no it does not have a remote lead just one of the two mounting holes has a piece of metal within the molding and thats for the ground. I will post pics.

If you really want it to turn off you can add a relay to it

And it is still on. I understand it might not do any harm but I just want to make sure.

And sorry for the funky wood work its just temporary!

Edited November 8, 201014 yr by crunkjuice1

As for the relay this is something I need to get hands on experience with, I was looking around in autozone but not sure which one to get.

relay or add a switch to the ground should work also

Edited November 8, 201014 yr by klee7013

what jerks .. I cannot believe they put a stick right where you need to read the damn voltage!

what jerks .. I cannot believe they put a stick right where you need to read the damn voltage!

LOL

here is a relay pic! this helped me a lot!

as for which one to get get a 12volt 20-50amp lol

here is the one i use!

http://www.parts-express.com/pe/showdetl.cfm?Partnumber=330-073

also this could help you to keep everything looking clean rather then a mess like mine is!

http://www.parts-express.com/pe/showdetl.cfm?Partnumber=330-075

keep in mind the ignition switch you can also use your remote (86) and use 87 for your meter

Thanks!