November 28, 200519 yr Admin holy crap, they look better than I had imagined, damn and you worked the map pocket and foot flood light back into the pod too, that is awesome, flat out amazing work,as for power, an Orion 8004 will power both sets, as to how it will power them I have not decided, I could go active so I can back the tweets down a little or just run each individual component off each of the 4 channels,once again crazy good work!!!!
November 28, 200519 yr Author Those look very nice indeed. Should be an awesome front stage. Now imagine if it was DIY ... Going to re-cover the entire door or just the new pods?<{POST_SNAPBACK}>It's DIM cause I'm Doing It Myself With some help from Nick, and Aaron, and Dave ( might not realize it yet ). dave get's the joy of helping me vinyl these monsters. I'm gonna smooth out any sharp curves with filler so it shouldn't be that bad. Gonna have to decide if we recover the whole panel or the pods. I built the pods on the existing removable panel at the bottom. So it still attaches with screws just like before ( added a couple bolts to compensate for added weight) , and all the design elements ( Nick, and Aaron know the corners I speak of ) were copied . So basically I have buit this pod to follow the factory curves of the panel so that we wouldn't have to modify the rest of the entire door. I think once I get the other panel built ( build pics coming in a day or two ) and we get them vinyled, they are gonna look pretty d@mn sexy
November 28, 200519 yr Author Holy bat chit batman an 8004 . So 100w each set x 2 sets per door = 200w a door :cool32: d@mn I have got to hear this
November 28, 200519 yr Author as it stands, how much volume to you guess the mids have per pod? <{POST_SNAPBACK}>they are right around 3/4 cuft each door. Edited November 28, 200519 yr by ramos
November 28, 200519 yr dave's front stage isnt over powering....he just had the tweeters wired wrong and it was just a cluster fudge...i cant believe that steve didnt notice that at the show...really makes me question his judging skills/ability....in a sq car...
November 28, 200519 yr Comin' along and looking great. Going to make me wish I had bought a car that had space to put speaks in the doors.
November 29, 200519 yr dave's front stage isnt over powering....he just had the tweeters wired wrong and it was just a cluster fudge...i cant believe that steve didnt notice that at the show...really makes me question his judging skills/ability....in a sq car...<{POST_SNAPBACK}>wonder if steve confused dave's mag with farvas truck?
November 29, 200519 yr dave's front stage isnt over powering....he just had the tweeters wired wrong and it was just a cluster fudge...i cant believe that steve didnt notice that at the show...really makes me question his judging skills/ability....in a sq car...<{POST_SNAPBACK}>wonder if steve confused dave's mag with farvas truck?<{POST_SNAPBACK}>chad, you suck lol
November 29, 200519 yr chad beat me...nevah again...heheI think all that bluegrass is getting to Steve
November 29, 200519 yr chad beat me...nevah again...heheI think all that bluegrass is getting to Steve <{POST_SNAPBACK}>frosty,did you get your speakers yet? if so, how do you like the sound?
November 29, 200519 yr dave's front stage isnt over powering....he just had the tweeters wired wrong and it was just a cluster fudge...i cant believe that steve didnt notice that at the show...really makes me question his judging skills/ability....in a sq car...<{POST_SNAPBACK}>I still need to go fully active!!!
November 29, 200519 yr chad beat me...nevah again...heheI think all that bluegrass is getting to Steve <{POST_SNAPBACK}>frosty,did you get your speakers yet? if so, how do you like the sound?<{POST_SNAPBACK}>American Express stopped my order because the apartment address I gave them didn't match my billing address...so WoofersEtc was sitting on my order for a month without letting me know about it. I called them today, got it straightened out...so the earliest I'd have the comps is in two weeks or so when I drive back to NC. Bastages.
November 29, 200519 yr Damn, how did I miss this thread? Sweet looking so far. Giving me ideas as I'm building new panels from scratch.
November 30, 200519 yr thats awesome, i just wonder if aaron is going to have any leg room in there, it was pretty tight before
November 30, 200519 yr Author Thanks for the compliments guys.Vladd: He should have, they only stand out 5 1/2 " at the highest point. And that is at the front at the dash. With 200w a door, leg room will be less of a concern than hearing loss Edited November 30, 200519 yr by ramos
December 5, 200519 yr Author Yep, how about some construction pics First thing I made was a backing plate to seal up the pods. Here it is trimmed up and in placethen we started door with the door panels all taped up, and cuts marked I would normally use an air powered body saw for cutting. But my stupid compressor is on the fritz. So here's my weapon of choice for this project. And here is after all the cuts were made. Aaron turn your head Notice the wood divider I had to make. There was a factory speaker grill in the way that had to go. So out it went, and the brace was put in place to seperate the crossovers. Now on to mounting rings where we want them. This is what I used to mount the rings. Glue gun, and gigantic high temp glue sticks That's some big d@mn glue sticks Sorry for the chitty picNow let's position the back plate and door panel Notice the 1/4" inch gap between the back plate and the door panel. Did we screw up ? Nope, gotta leave room for fleece and vinyl Here we have the rings glued into position except for the tweets, had to build in two stages. THen we stretch fleece over everything and smooth out any wrinkles before we put any resin on. I don't know if you can tell what is printed on the fleece, but Nothing says Mercedes quite like John Deere I put the first coat of resin on the fleece, and that's where I'm at, at this point. Resin takes quite a while to cure in this crappy weather we're having in hillbillyville. SHould hopefully have more pictures tomorrow
December 5, 200519 yr Admin HOLY WOW, you do great work man,I almost shot my lunch out through my nose when i saw the john deer fleece, oh man the comedy in that looking awesome !!!
December 5, 200519 yr Author Thought you would like that. Nothing says High Class German auto more than John Deere
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.