June 7, 201213 yr Author Let me guess, your favorite colors are red and white. That's some serious equipment you got there. I feel sorry for the little car. It ain't gonna survive on week once that system is up and running. Good luck with the setup. Can't wait to see some vids of it in action. lol yup white and red are my colors thanks man i hope to crack/blow the windshield out.... cant wait to find out Looks good man! Where did you get that switch? I also have a parasitic drain that I can't figure out.bought my switch from Jegs.... was like 70 bucks which is a little expensive... but you pay more for quality... the bish is heavy lol....got more work done today....took forever to clean the buss bars....heres one cleaned to show the difference:got everything cleaned and wired up .... that no-ox stuff is sooo messy lol... but should be well worth it since none of the copper will oxidize:got the side panels painted:got the holes in the top of the batt box painted.... ill paint the rest of it when i get it screwed on: (hopefully tomorrow)heres the front all sealed up.... still need to be cleaned a little bit.... but once the front cover is on... i can put the stock side panels back on which will cover up the sides:Driver side:Pass side:
June 7, 201213 yr Author got the back side panels mounted.... got the top of the batt box mounted.... got the whole back area painted white....no pics til tomorrow though when i get the amp mounted
June 8, 201213 yr Author didnt get any work done today had to help my dad build a frame for his bed lol...back area painted all white:finally got my sheet of 3/4" mdf for the front cover hope to hook up the amp and mount it tomorrow..
June 10, 201213 yr VIDEOS!!!! Please? When it's done of course lol. Edited June 10, 201213 yr by Angelboy863
June 13, 201213 yr Author front cover cut:well i couldnt get it to fit into the car as 1 piece so i had to cut it in half and put it in that way.... took me awhile to get it to fit right had to trim it up...cut the pieces for the batt switch box
June 13, 201213 yr Author Thx guys. Got the front cover painted white. Got the batt box pieces painted white.. Also did some work on the port... Near the bottom is wasnt as wide as the top so I fixed that Just need to paint the port red and mount the switch
June 17, 201213 yr Author Lets just say it should be done tomorrow.get ready for pics and maybe a vid !!
June 18, 201213 yr Author This is gonna be nasty!!!I sure hope so !! come up to KC this weekend we have a few shows and we can do some testing.will do if i get my alt back... still waiting on that... but the wall will be finished hopefully tomorrow...
June 21, 201213 yr Author well the wall is done....for the most part... still needs to be touched up in some spots but i can do that later...still need to put back in the passanger seat. headliner. side panels in the front. and the alt im still waiting on.....o and i still need to hook up the amp but that shouldnt be too hard...i decided to round over the port like on jesus's blazer...batt switch: (need to paint screw heads white lol)back end: (amp not hooked up yet) Edited June 21, 201213 yr by 16K
June 21, 201213 yr Author Looking god man!Get it metered yet shit i wish... still waiting on the alt... havent even heard back from mechman after i shipped it to them... and ive emailed them twice now so we'll see............
June 23, 201213 yr Author Sooo... just hooked up the amp and holy shit is it louuuuuud lol....right now im only running it on battery power.... doesnt drop below 11.5v.... then again the amp is only about 1/4 of the way up and the clip light isnt flickering... im waiting to get the alt in before i really crank on it... the subs were kinda getting stinky after about 2 minutes on full tilt...when playing low songs.... but it think its cause of the power its gotta be 158s EASY in the higher notes.... it kinda picks up the lows... not as much as i would like... but its still LOUD as shit so im happy so far... cant wait to meter...this is a low song so it wasnt as LOUD as in this other song i tried... i shoulda recorded that one to but i dont know if the car flexed as much or not....as you can see i need to brace the front part of the roof lol... its noisy o and watch my steering wheel lol Edited June 23, 201213 yr by 16K
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.