July 19, 201213 yr Author Y so blurry?Camera phone, I'll use my digital camera in the future just for you.
July 21, 201213 yr Author Got the tweeters installed, and cut my mdf rings for the 6.5's Should be playing tomorrow!
July 21, 201213 yr I would do a single Xcon in a 4th order ported through the decklid with 1.5-2k. My experience with Xcons was they love power and reproduce music clearly and lows in my particular app were authorative and pronounced.
July 21, 201213 yr Author At most 2000 RMS for the subs. This will be a semi "budget" build. Thanks for the suggestions guys!
July 23, 201213 yr Author Door rings are in! Letting them dry overnight, then the speakers go in tomorrow.
July 23, 201213 yr Nice start so far, what did you use to bond the speaker ring to the door? Edited July 23, 201213 yr by jay-cee
July 23, 201213 yr Author Nice start so far, what did you use to bond the speaker ring to the door?Thanks! Heavy duty liquid nail, I've used it for this before with great results. Clamp it for a few hours then let it cure for a day or so.
July 23, 201213 yr Nice start so far, what did you use to bond the speaker ring to the door?Thanks! Heavy duty liquid nail, I've used it for this before with great results. Clamp it for a few hours then let it cure for a day or so.Thats good news, liquid nails is always in my arsenal. Appreciate that, will give it a try in the future.
July 23, 201213 yr Author Nice start so far, what did you use to bond the speaker ring to the door?Thanks! Heavy duty liquid nail, I've used it for this before with great results. Clamp it for a few hours then let it cure for a day or so.Thats good news, liquid nails is always in my arsenal. Appreciate that, will give it a try in the future.It is strong enough that I can't get it off by pulling on it as hard as I can. A few taps around the seam with a flat head and a hammer and it comes off clean. Best of both worlds in my opinion. The last one that I had in there was about 6-7 years old when I took it out and it was just as strong as when I put it in.
July 23, 201213 yr do you put anything to protect the wood? resin? liquid nails around all the wood? paint? primer??
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.