Jump to content
View in the app

A better way to browse. Learn more.

SSA® Car Audio Forum

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Featured Replies

Posted

I didn't have much time to fool with it so I just took some quick pics with the iphone.

IMG_1087.jpg

IMG_1088.jpg

For size reference, 18 inch basket

IMG_1090.jpg

and 10 inch basket

IMG_1092.jpg

Once I get it together and broke in I have to send it to Arizona to put on a Klippel analyzer to verify parameters and to do AES power rating on it.

when your ready lets talk

  • Author
  • Popular Post

It's gonna use a 4 later flat wire coil (see coil thread) motor force should be in the neighborhood of 150-200. So it's a pretty beefy sub. Qtc will be around .5 give or take a little depending on the size. I designed it so that it will work well in both sealed and ported. All the alignments that I recommend will be bb4 ported alignments with a f3 in the low 30's or high 20's depending on the size. power rating should be around 1,250-1,500 rms but I'll wait for proper klippel power testing to release that.

prices are still tentative but should be within 10 bucks give or take:

10" $313

12" $320

15'' $329

18" $346

As long as the T/S parameters come back as expected and I don't have to do any design change on the motor I'm expecting the first run for Christmas.
  • 2 weeks later...
  • Author

Got to test the motor today coned to a 18. Had it in a 5 cubic foot enclosure tuned to 32 hertz. Using my FEA program to calculate parameters that box should be giving me an f3 of around 28 hertz.

Sub was powered by two strapped IA 20.1's. Sub sounded pretty good so I'll be sending it off to be measured on a Klippel Analyzer on Friday.

I however wasn't thrilled with the durability of the black finish so I'll more than likely use a chrome finish or a black chrome finish

Edited by Quentin Jarrell

Sounds good! Any pics of the setup?

  • Author

No, I just had it throw in an extra box I had laying around the shop. If I have time I'll take a video before I ship it off

  • Author

I normally go the slipper once a month for some crabs. Once I get everything situated I'll give you a shout.

I normally go the slipper once a month for some crabs. Once I get everything situated I'll give you a shout.

awesome sexy.... I'd like to be a first!!!!

I normally go the slipper once a month for some crabs. Once I get everything situated I'll give you a shout.

Got crabs uh? JK lol. Sounds awesome man. I'm in Louisiana a lot. My teammate lives by morgan city. Heading there this weekend.

Looks massive with the smaller basket. Very nice!

  • Author

short videos done with iphone. I'll get some better ones with a Nikon when I get the sub back.

Edited by Quentin Jarrell

Any news on the SPL driver? The higher RMS driver.

  • Author

I've got a lot of samples coming in with the production run of this driver. You'll just have to wait till Christmas.

  • Author

Sub in above videos is an 18 in a 5 cubic foot box tuned to 32 hertz with around 1,500 watts.

Looks a little loud. Nice :fing34:

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

Recently Browsing 0

  • No registered users viewing this page.

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.