steel bracing on all 8 corners

car is in primer at last

smoothed off the fog lights

3liters of fiberglass and resin mix in the whole top half of door

bus bar finally done might give it a polish when i have time just need need to make perspex box for it now

now this is the reason you dont leave the keys in the car i leave the car is reverse as it has no hand brake.

duncan decided to start the car it shoot back 10ft into 10 of the subs and a wall :

damage to the car

damage to 1 sub

funny how the subs aint even in the car yet and there destroying it :L

Damn lol... Lookin good other than the mishap.. Keep us updated!

well cuple more bits been going on car is now ready for paint and the main box is nearly done just a little more steel todo

then cuple coats of fiberglass once thats done i can get the tunnel finished and get it in the car for good and get it fully

sealed up and start running wiring

think we are going to go for the brushed look as not a fan of the bling bling polished look

not sure what the plan for the roof is might wrap it in matt black

well little teaser as the pics aint great but will get some decent pics once i put the car back together and it isnt dark the blue

is brighter in person

looking good. sucks about beating the car up but i like the color you chose

Heck of a build, keep the pictures coming. Crazy how much money is going into such a small commuter car.

thanks guys heres another little update

getting there just needs side skirts, door lock, wheels and the roof ect wraping plus we will be changing the lights for tinted ones

got a little delivery 8 amps 9,000rms for the c2 and 3,500rms for my saxo

next step carry on with the audio on the c2

Same wrap color I did on my Camaro. Looks good.

Really love the color.

One of if not the most impressive enclosure I have seen. This thing should be nuts!

thanks guys well I have lots and lots of pics to post but I will still off with a cuple until tomorrow








 

update time only 5 days until it has to be playing

love those amps, I been looking at them recently

I was just about to ask about them.  How do they perform.  I notice they say German, but they have some Korean ques as well.

thanks guys amps seem to be running very well even with my dropping them down to 11s (car still has standard 70amp alt at the moment)

well about time I updated this car had mot today only a cuple things that have failed mainly due to bits being robbed off it but easy fix so mot pretty much sorted I havnt had much time to work on the c2 due to family problems so for mod nats it wont look pretty but aslong as it has bass I will be happy

34hz without front end of port




mosconi 4 to 6 and epic fitted

36mm birch ply and 50x50x6mm angle iron this shouldnt flex

seat belts fitted

bass over leg space

 

a little vid wasn't full tilt and tunning it as 34hz not the 29hz its going to be quite windy

This is amazing ! You have good skills, sir

I'm waiting for more...

 

I can tell you this French car is small, VERY small !!! It's a C2, but the C1 is even smaller.

thanks bud well a little video from yesterday I think we might need to get the stripper pole inside asap 12-16mm of deadening isn't holding up to well  http://www.facebook.com/photo.php?v=10151695267410763&l=5526063826142189557

Edited June 17, 201312 yr by liam_b