January 16, 201411 yr I want something super lightweight, AWD, V6 twin turbo, a roll cage, two seats and a steering wheel. For now I'm having too much fun in the Miata. Low power, low cost. Well screw you and your RWD
January 16, 201411 yr I want something super lightweight, AWD, V6 twin turbo, a roll cage, two seats and a steering wheel. For now I'm having too much fun in the Miata. Low power, low cost. Well screw you and your RWD Being nimble is more fun than just RWD
January 16, 201411 yr Might look into this. http://lowes.lghausysusa.com/productLines/16/94/himacs-colors
January 16, 201411 yr Florida isn't much worse than WNY in the summer time. At least not where I am.J
January 16, 201411 yr "you could even nickel plate your crack pipe"ROFLWant one of his bags now... Fun fact: 316 Stainless forms the basis for most implantable metal objects in the medical field. The four screws in my tibia are made from it.
January 16, 201411 yr Might look into this. http://lowes.lghausysusa.com/productLines/16/94/himacs-colors Solid surface is definitely the way to go if you can't afford engineered stone. Make sure to see it in person, because some of them can look really "plasticy" and stick out like a sore thumb.
January 16, 201411 yr Good morning, view isn't so bad BUT I'd rather be looking at snow.With that comment, I can no longer consider you an intelligent being. You must be part Eskimo. Err, close, Viking. Only part of SoCal looks like that. Most looks like this:
January 16, 201411 yr Holy shit quartz is expensive! Did you check Silestone? Yes $65-$89 a square foot.
January 16, 201411 yr Any recommendations on some 3-4" midranges and tweeters to be run active 3 way. Midbass will be Exodus Anarchy run off axis in the doors, and mids and tweeters will be run on axis on the a-pillar. Also willing to run a fullranger on axis to pair with the Exodus', just needs to handle ~1000+ HzCute kid Don't run the Exodus that high. If you run a 3 way you can get something that digs WAY lower and use a VERY cheap tweeter on the top. MOunting locations will determine all options though.I would rather run a two way system. Let's say max budget is 160 for mids and 160 for highs as maximum budget. Is there a better option that Ex-Anarchy? They seem to be quite the performers. I can get the tweeters/FR's/whatever on axis, but the mid will be off axis. There's only so much I can do. What do you suggest Sean? Edited January 16, 201411 yr by gprestonmoto
January 16, 201411 yr Any recommendations on some 3-4" midranges and tweeters to be run active 3 way. Midbass will be Exodus Anarchy run off axis in the doors, and mids and tweeters will be run on axis on the a-pillar. Also willing to run a fullranger on axis to pair with the Exodus', just needs to handle ~1000+ HzCute kid Don't run the Exodus that high. If you run a 3 way you can get something that digs WAY lower and use a VERY cheap tweeter on the top. MOunting locations will determine all options though.I would rather run a two way system. Let's say max budget is 160 for mids and 160 for highs as maximum budget. Is there a better option that Ex-Anarchy? They seem to be quite the performers. I can get the tweeters/FR's/whatever on axis, but the mid will be off axis. There's only so much I can do. What do you suggest Sean?I know I mentioned a 2-way with the peerless hds tweets, but now I see you already have them according to your sig? What's wrong with that setup?
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.