April 15, 20196 yr 1 hour ago, Aaron Clinton said: Wifey heads up to Boston tomorrow for 2 interviews. Super commuting might happen. :-/ Big promotion for her?
April 16, 20196 yr I need a piece of sheet metal that is bent at 90 degrees. 2"x2"x5" . Where would you try to source that? I've been looking for boxes to cut up.... It is for a minidash to mount on the atv when I raise the bars
April 16, 20196 yr 33 minutes ago, ///M5 said: I need a piece of sheet metal that is bent at 90 degrees. 2"x2"x5" . Where would you try to source that? I've been looking for boxes to cut up.... It is for a minidash to mount on the atv when I raise the bars I could do that easy. And have access to metal and the brake.
April 16, 20196 yr I have to fab sheet metal almost on a daily basis.If you are familiar with autocad scetch something up just to make sure I'm on the same page..pretty sure your meaning a 2"x2" bent at 90 degrees 5" in length. I could center those 4-5/8 holes as well.
April 16, 20196 yr Sean I will fab something up and post a pic and see if that is what your looking for."hopefully tomorrow" when at the shop.
April 16, 20196 yr Holy hell. Stop... and thank you. I will get you exactly what I need. I'd be glad to pay for it as well. I need to measure a bit better, but am in bed and dont want to fuck up.
April 16, 20196 yr Best thing I've read all day, had no idea where to go. No blacksmith shop here like up at the farm.
April 16, 20196 yr Admin 19 hours ago, dem beats said: Big promotion for her? Possible monster promotion. Shes a rising super star in her field.
April 16, 20196 yr Admin 16 hours ago, ///M5 said: I need a piece of sheet metal that is bent at 90 degrees. 2"x2"x5" . Where would you try to source that? I've been looking for boxes to cut up.... It is for a minidash to mount on the atv when I raise the bars I am a PM for a large steel fab shop if you need other stuff down the road.
April 16, 20196 yr Thanks guys. See if this makes any sense. I figured instead of a picture or two I would make a quick document. In pdf form, I can surely change that if you can't open it. https://drive.google.com/open?id=1C-aL6ObIqcnwa4Az3NhiCyBSpPTugKib Shows what I am trying to build. Reviewing the picture I need to verify the 4.75", but the rest is good.
April 16, 20196 yr 22 hours ago, dem beats said: Somehow all 4 of my wifes rims are damaged but none of the tires...... Hmmmm Damn interesting there.
April 16, 20196 yr 2 hours ago, Aaron Clinton said: Possible monster promotion. Shes a rising super star in her field. Congrats to her. Any prayer of at least partial telecommuting? J
April 16, 20196 yr 2 hours ago, Aaron Clinton said: Possible monster promotion. Shes a rising super star in her field. Awesome! I hope for the best possible outcome!
April 17, 20196 yr Sean I can do that. So you decided on 4.75 in length? 6 hours ago, ///M5 said: Thanks guys. See if this makes any sense. I figured instead of a picture or two I would make a quick document. In pdf form, I can surely change that if you can't open it. https://drive.google.com/open?id=1C-aL6ObIqcnwa4Az3NhiCyBSpPTugKib Shows what I am trying to build. Reviewing the picture I need to verify the 4.75", but the rest is good. To space those 5/8 holes out with 3/16 in between each hole we need a minimum of 3.25 to work with.I did a fast rough scetch on paper to explain what I'm getting at.The holes are on point at 5/8's as well just didn't mark them on drawing.
April 17, 20196 yr I know it is over 3", but only 0.0625" so I didn't think it mattered much other than for centering it of course. 10/16*4 = 40/16 3/16*3 = 9/16 49/16 = 3.0625" or 3 1/16" Am I nuts?
April 17, 20196 yr I had planned on indexing it forward. Feel odd if I have a new "washer" underneath all 4 handlebar bolts. Either was going to trim around 2 or slide it forward which buys me another 1/16". I am still confused at where the extra 3/16" came from in your drawing as I can't argue with it. Funny how much more clear what you made fast is than what I did all complicated and shit.
April 17, 20196 yr 6 minutes ago, ///M5 said: I know it is over 3", but only 0.0625" so I didn't think it mattered much other than for centering it of course. 10/16*4 = 40/16 3/16*3 = 9/16 49/16 = 3.0625" or 3 1/16" Am I nuts? 8 minutes ago, ///M5 said: I had planned on indexing it forward. Feel odd if I have a new "washer" underneath all 4 handlebar bolts. Either was going to trim around 2 or slide it forward which buys me another 1/16". I am still confused at where the extra 3/16" came from in your drawing as I can't argue with it. Funny how much more clear what you made fast is than what I did all complicated and shit. I agree with the math . I will lay it out on some metal and see how it all plays out. We could probably subtract some for the width of the ball point pen on my sketch lol..Didn't think it would add up to that much...I know what your wanting now though.
April 17, 20196 yr And if they were a bit closer than 3/16" it'd be fine. I would just blast the first two here and then do the inner two how they look best since I have no way of measuring. '"
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.