Looks funny Stefan. Probably go see it.

 

Fucking HILARIOUS.

 

"JESUS CHRIST BLESSED ME WITH MANY GIFTS. ONE OF THOSE IS KNOCKING PEOPLE THE FFFFFFFFFFFFUCK OUT!!!!"

Grill them hands up.

Fucking made in China chain saw.

 

Make it rain on the African plains

fucking chat

My everything hurts. While changing the plugs a spring shot up in the yard next to my garage. Just water shooting up from the ground..... pipe for an outside spigot on the garage burst.

Happy birthday to me.

The upside is my truck still has a missfire but it is soooooo small. Awesome sauce. I can accelerate uphil! Its amazing! Went for a good little drive to see how it runs. Took some photos of the twin cities here. Gooooood times.

Oil change tomorrow morning and finish the plugs on Sunday. I am ultra thankful for the wifes help today, my temper was getting out of control for a while. Her hands made fast work of some of it. She told me her dad had her be his tool gofer and flashlight technician, it was kind of cool to do that together. Weird but cool.

I am also thankful for my massage appointment tomorrow. Definitely going to schedule a 2 hour one for next week before my job starts if at all possible.

fucking chat

I wanna, but it don't work in mobil.

And I ain't getting off this couch unless it's off to bed.

Uber busy weekend ahead.

You never slow down!

I will, it will just be a total stop.

Hey you can always join me in August for my birthday.

No vacation time stored up at the old/new job, and the last few weeks have shown why SSA cannot be run solo for more then a few days.

Time to hire on another hand?

J

Hell I would work for free and get him some free time away, but the vacation think is the stopper

I can agree with ya there Neal. I only ask because being able to work from anywhere would be great. Especially since I'm hopefully out in the next 90 days, and on my way to Florida.

J

Not a place I would go for opportunity as a first choice. Then again not sure what jobs you are looking for.

Glad you are vetting out though.

Just would like to have some family close, and NY is horrible. When you think you're doing damn well and making 25k a year and have no real benefits its sad IMO.

As for work, looking for employment in any of the following areas;

Administrative

Photography

Writing

Entertainment (hosting, planning, and advertising)

  

Seminole most likely. Right outside of Tampa Bay. Do I want snow and such? Yes, but the cost of living and opportunities are outstanding in FL.

J

 

Swimming in the Gulf waters FTW!

  

AGREED!!!!

My face is kind of sensitive and I needed a portable option for shaving so I picked up the Braun 760.

So far only used it once with several days worth of stubble. Worked better than a razor because I could go against the grain. I read it gets even better as your face gets used to it, so this is nice!

My Norelco works well for me, but it's getting close to needing an upgrade.

J

fuck guys im all drunk and no one is on

I'm just dropping in for a few brother.

J

its seems soundstream/ppi got the guys from minidsp to make them a processor (i believe the two units are identical). 

 

http://www.precisionpower.com/html-version/manuals/DEQ-8-manual.pdf

 

some rep mentioned they're working on android control via wifi dongle, might be ready by the end of summer.

 

$500 isn't terrible, but i think i'm still planning to pick up a pair of minidsp 2x4 units for half that. ...and deal with the lower output voltage. 

 

or 2x8... 

Edited April 27, 201312 yr by lithium

3 hours for 4 plugs.... intake side might be even longer...

Have to wait until sunday.

 

I won't tell you that it takes me about an hour and a half to tune them up.

 

I'm just dropping in for a few brother.

J

 

Hey bud, how is your neck doing?

its seems soundstream/ppi got the guys from minidsp to make them a processor (i believe the two units are identical). 

 

http://www.precisionpower.com/html-version/manuals/DEQ-8-manual.pdf

 

some rep mentioned they're working on android control via wifi dongle, might be ready by the end of summer.

 

$500 isn't terrible, but i think i'm still planning to pick up a pair of minidsp 2x4 units for half that. ...and deal with the lower output voltage. 

 

or 2x8...

2 of the 4's.

Add a line driver and you are still ahead.

fucking chat

I wanna, but it don't work in mobil.

 

Same problem last night for me.

fuck guys im all drunk and no one is on

try social media

Just picked up another ZPA 0.5 Now I have one 0.3 and three 0.5 Next install will be amazing!

Well that was a pain, Home Depot no longer just exchanges Rigid tools without the original receipt.  I bought the first of the rigid grinders ~4 years ago and no, I do not have the receipt anymore, last time it died they just had me pick a new one off the shelf and away I went.  So they are sending the busted one in for repair, then they are going to call me about what it needs, like I give a shit, just fix the waste of money, its a 'lifetime' warranty.  

3 hours for 4 plugs.... intake side might be even longer...

Have to wait until sunday.

I won't tell you that it takes me about an hour and a half to tune them up.

I know I am teh suck. Learned a lot though. A few of the plugs were locked in tighter that two big digs in a Chinese finger trap.

Well that was a pain, Home Depot no longer just exchanges Rigid tools without the original receipt. I bought the first of the rigid grinders ~4 years ago and no, I do not have the receipt anymore, last time it died they just had me pick a new one off the shelf and away I went. So they are sending the busted one in for repair, then they are going to call me about what it needs, like I give a shit, just fix the waste of money, its a 'lifetime' warranty.

I get pissed about the warranty work too. Sucks.

its seems soundstream/ppi got the guys from minidsp to make them a processor (i believe the two units are identical). 

 

http://www.precisionpower.com/html-version/manuals/DEQ-8-manual.pdf

 

some rep mentioned they're working on android control via wifi dongle, might be ready by the end of summer.

 

$500 isn't terrible, but i think i'm still planning to pick up a pair of minidsp 2x4 units for half that. ...and deal with the lower output voltage. 

 

or 2x8... 

There was some European brand that did the same thing, only theirs is $800 or $900

 

Not sure what the MiniDSP guys had in mind when they started doing this, but seems like their business is blowing up huge.

3 hours for 4 plugs.... intake side might be even longer...

Have to wait until sunday.

 

I won't tell you that it takes me about an hour and a half to tune them up.

 

I'm just dropping in for a few brother.

J

 

Hey bud, how is your neck doing?

Still a bit sore but not that bad. I need to go see the chiro soon.

Insurance company came out and took pics of my truck. The guy did see some damage to the tow hit hitch so he figures my neck got tweaked a bit.

J

Well that was a pain, Home Depot no longer just exchanges Rigid tools without the original receipt. I bought the first of the rigid grinders ~4 years ago and no, I do not have the receipt anymore, last time it died they just had me pick a new one off the shelf and away I went. So they are sending the busted one in for repair, then they are going to call me about what it needs, like I give a shit, just fix the waste of money, its a 'lifetime' warranty.

I get pissed about the warranty work too. Sucks.

Same here. I mean who keeps receipts for years?

J

 page FO FOTTA FO

its seems soundstream/ppi got the guys from minidsp to make them a processor (i believe the two units are identical). 

 

http://www.precisionpower.com/html-version/manuals/DEQ-8-manual.pdf

 

some rep mentioned they're working on android control via wifi dongle, might be ready by the end of summer.

 

$500 isn't terrible, but i think i'm still planning to pick up a pair of minidsp 2x4 units for half that. ...and deal with the lower output voltage. 

 

or 2x8... 

There was some European brand that did the same thing, only theirs is $800 or $900

 

Not sure what the MiniDSP guys had in mind when they started doing this, but seems like their business is blowing up huge.

 

D'uh, everything with "Europe" on it is expensive since most think they invented swiss cheese and everybody here has a money tree in their garden. 

I'm still going to get a miniDSP next month, fuck everything. 

Pretty funny, Adrian can't have his own opinion, can't complain about it since people get pissy. So even in the house I built with my father (at the country side) somebody else still has to pull the strings and I should pretend like I like it. I mean you come to my house, give me imperative suggestions on what to do and I'm the bad guy since I don't listen. 

 

Short story: people suck.