Posted February 5, 201312 yr Stayed Tuned for this epic 20,000 watt BuildTeam Sundown AudioTeam FiTeam XS PowerThis Build Will Consist of....1-SC Designs Wall with Pluggable Port for SPL/Daily...2 -15s Secretive Woofers Fi Audio 15s...12 - Crescendo Audio PWX 8s2- Crescendo PWX 6s8 - Selenium St 350s2- Sundown Audio NS-1s2-Sundown Audio 200.4s1-Sundown Audio 125.41-JBL MS-81 XS D31004- XS D7500s1-Singer 220amp Alt w/VCM1- Custom Toolmaker Fuse BlockToolmaker Goodies, Distros, dual inputs,'1-Kenwood KIV-701MORE GOODIES to COME!
February 5, 201312 yr why so many tweets? :Sshow car? demos? possibly just has the money for it... lol
February 5, 201312 yr Will you be running a 16v setup? Not sure I've seen much more than 6500-7k out of the NS1's.
February 5, 201312 yr I have been waiting to start his build for awhile. The last wall was loud as hell. 154 on music or tone can't remember, 2 15'' SP4's, 1 NS1. So yeah guys this will be one to watch! Edited February 5, 201312 yr by BrutalBasser
February 5, 201312 yr I dont get it. How are the fuses kept on individual wires? This looks like a bank of six 250amp fuses on one circuit. If one of the wire shorts on this circuit it's gonna have to blow all six of the fuses. Am I missing something here?
February 5, 201312 yr Author I dont get it. How are the fuses kept on individual wires? This looks like a bank of six 250amp fuses on one circuit. If one of the wire shorts on this circuit it's gonna have to blow all six of the fuses. Am I missing something here?The amplifier has dual inputs and not all fuses will be used to fill it up I will use 4 - 250amp fuses on each NS-1 that has toolmaker dual inputs so 6 positive leads going in and it will be fine no worries lol
February 5, 201312 yr Author why so many tweets? :SJust wait and see and each from door will have 3 tweets now wait till u see where other 2 are going
February 5, 201312 yr why so many tweets? :S Just wait and see :)/> and each from door will have 3 tweets now wait till u see where other 2 are going A/C vents? Looking good so far, those subs look sweet!
February 5, 201312 yr Author lol noo not the ac vents and i am doing rear pods where the side of the wall is going to sealed away from front of the cabin and do a side panels with 2 8s and 1 st 350
February 5, 201312 yr Author Will you be running a 16v setup? Not sure I've seen much more than 6500-7k out of the NS1's. i have a VCM so i can crank up my voltage to 16v for 30 second burp but its a 12 volt setup!
February 5, 201312 yr Hey man, unless you have otherwise had different experience, alternators don't generally help with burps when your battery capacity exceeds it, and few yrs ago at a show, someone jumped their regulator to 17.9v on a 12v system trying to put out a better score than me and ended up posting the EXACT same burp score compared to 14.7v.
February 6, 201312 yr Author yeah it sometimes helps but i wont really do that ill stay between 15.1 and below for demos....and hah yes sirrr 1 ns-1 per meefer!
February 6, 201312 yr Author yeah it sometimes helps but i wont really do that ill stay between 15.1 and below for demos....and hah yes sirrr 1 ns-1 per meefer!
February 7, 201312 yr Author thanks and they are rated at 4,000 rms but they will laugh probably at my power ill be giving them 2 Ns-1s 1 on each woofer
February 7, 201312 yr i'm interested in this power for averaging.If i were to ever run them, i'd run them on some 5500s at 0.35ohms for 30sec.
February 8, 201312 yr Author ohh ns-1 puts more power out tho at .5 ohm ive got it clamped at 7,128 watts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.