I got a new dust cover to replace a cracked one and was wondering what I use to glue it on. Any help would be greatly appreciated

Thanks

Alex

CA glue.

Loctite glue is what you want. You can get it at Walmart.

cyanoacrylate

That's what the glue needs to have. It's the ingredient.

So just go to Walmart and get loctite glue?

Yea I can't post pic in this from mobile but it's a blue bottle with a cone shaped twist cap.

Yea I can't post pic in this from mobile but it's a blue bottle with a cone shaped twist cap.

 

This right?

No use amazing goop.

Yea I can't post pic in this from mobile but it's a blue bottle with a cone shaped twist cap.

 

This right?

That's right! I used it for a recone and it worked great. Also anything around the house that needs gluing, loctite is perfect. Just don't get it on your hands because its hard to get off.

i personally would not use the super glue,    i also have never used it.. so.

 

 but i do use amazing goop the blue one tube. and make sure you take some sand paper and scuff up the dust cap surface you will be gluing

Ok, thanks for the tip about scuffing the dust cap. Ill try the goop out. Walmart, lowes, or Home Depot would have it right?

yeah

I couldn't find the amazing goop anywhere. Might just have to use the loctite. It won't hurt anything will it

Edited April 26, 201312 yr by bcst86

amazing goop is at auto parts stores like oreilly, auto zone ect.

 

CA glue works, but for me it makes the surround have white spots. 

ok cool, ill go check those places out. 

Amazing Goop...Autozone. Worked great for me.

5 minute epoxy works good to.

5 minute epoxy works good to.

x2

CA glue can be a little brittle, but for cone to dust cap there isn't a ton of stress and flex and it will work fine.  If you can get Loctite 410 that is best, it is thicker, gap filling and black.  Places like Fastenal usually have it.  Look for a Loctite dealer in your area.

 

You only get white marks if there are oils for the CA vapors to solidify on.  Clean everything well (with something that won't melt your surround, I use Windex) and you won't have any white marks.

i use gap filling CA glue.

i havnt had a chance to get anything yet, but hopefully today I can get some of that goop and try it.  ill post later if i get some and get the dust cap back on

Still no luck finding the goop so looks like ill have to use loctite

whhhhaaa where in texas are you !

College station. I looked everywhere

Ace hardware carries it if there is one around you.

Finally found some at hobby lobby. Thanks everyone!