Need help with box demensions for a custom built subwoofer The RE has tc aluminum basket 4" 8 layer flatwound aluminum voice coil 3 10" tc spider pack with 1" spacer 8 gauge ofc direct leads dual 2 ohms voice coils everything is brand new just the moter is used also has a two tone carbon fiber dust cap can take 4000 watts rms

Thanks going in a astro van

Are those the only specs about that sub you can give us?

Are those the only specs about that sub you can give us?

need ts parameters.

not enough info!!

We don't even know the size of the subwoofer...

It's a 15

 

Are those the only specs about that sub you can give us?

need ts parameters.

 

!

He must be trolling

Can't build a box for a frankenwoofer without measuring the T/S parameters. If you haven't built it already you are WAY better off not as slapping a bunch of random stuff together never nets nice results.

Got the sub in a trade how would I get the t/s parameters

Did Re build the sub or was it built by some person using Re parts?

You can either homebrew a T/S tester or buy one from PE. Most likely if you ask the question you'll need to buy one.

Thank you Google:

 

Specs:
Fs: 31.0 Hz
Re: 1.14Dvc
Qms : 4.14
Qes : .517
Qts: .46
Sd Cm2: 810
Vas: 87.7
BL: 12.14
SPL 1W/1M: 88.9
RMS: 2000W

Did Re build the sub or was it built by some person using Re parts?

The sub was built by zueslicious from ****

Don't buy it. Buy something with known parameters. SMD is full of morons that don't know their head from their ass and utilizig anything frankensteined from there is a terrible idea.

 

Did Re build the sub or was it built by some person using Re parts?

The sub was built by zueslicious from caco

 

Then get the t/s parameters from him if you don't think Aaron's are right.

 

Or you could do what ///M5 said and measure your own.

 

Have you tried calling RE Audio?

Edited September 25, 201410 yr by pmureika

Did Re build the sub or was it built by some person using Re parts?

The sub was built by zueslicious from ****

Then get the t/s parameters from him if you don't think Aaron's are right.

Or you could do what ///M5 said and measure your own.

Have you tried calling RE Audio?

Arron's are right but for a stock destroyer.

Did Re build the sub or was it built by some person using Re parts?

The sub was built by zueslicious from caco

Then get the t/s parameters from him if you don't think Aaron's are right.

 

Or you could do what ///M5 said and measure your own.

 

Have you tried calling RE Audio?

Aaron's are for the destroyer and what RE would have. Being this is a "Custom" woofer it won't match those. Could be WAY off in fact. All that being said, I've never seen a "custom" woofer really worth using. If the builder can't share T/S parameters then he is guessing which is not how I would want a woofer designed.

 

 

 

Did Re build the sub or was it built by some person using Re parts?

The sub was built by zueslicious from ****

Then get the t/s parameters from him if you don't think Aaron's are right.

Or you could do what ///M5 said and measure your own.

Have you tried calling RE Audio?

Arron's are right but for a stock destroyer.

 

Well unless you know somebody that has  the equipment to measure them.

 

You need to get them from the guy that built it.