March 29, 201510 yr Author Get the rims from Tony? Great guy if so.friend locally, stole the pic offline LOL I've been in the store where you stole the pic from lol ah nice lol bad ass man
March 29, 201510 yr Author as pics do absolutely no justice. let me put it this way, the lug to the left, is a 3/0 welding cable lug loll.... can you say 2 4/0 cables in one terminal? yessssssuh friend of mine came over to help put some hands in on the burban getting closer, mock ups glassing all the internal seams two baffles on and secured, will probably put the other two on whats its in the truck. more tomorrow, stay tuned
March 29, 201510 yr Your fabrication skills looks great! It looks like a really fun project. That port looks REALLY small though.
April 3, 201510 yr Author Your fabrication skills looks great! It looks like a really fun project. That port looks REALLY small though.thanks man.. and are you fimiliar with 6th orders? youll see soon enough why it is the way it is;)
April 3, 201510 yr Author new regulators(: had some minor problems with the other blue ones reppin **** round over my friends small hand on the baffle lol me in the background in there, finally! cuttin the wall out done for the night
April 3, 201510 yr Your fabrication skills looks great! It looks like a really fun project. That port looks REALLY small though.thanks man.. and are you fimiliar with 6th orders? youll see soon enough why it is the way it is;) Yup, in fact I am. I'm just worried you are going to say its that small for "cone control" or something along those lines.
April 3, 201510 yr Author Your fabrication skills looks great! It looks like a really fun project. That port looks REALLY small though.thanks man.. and are you fimiliar with 6th orders? youll see soon enough why it is the way it is;) Yup, in fact I am. I'm just worried you are going to say its that small for "cone control" or something along those lines. lol oh no, for teh lows
April 3, 201510 yr LOL, ok. I'm still skeptical and I think your port velocity is going to be too high, but I'm curious to see how your enclosure works out! Keep up the good work with the pictures. Edited April 3, 201510 yr by Triticum Agricolam
April 3, 201510 yr Author LOL, ok. I'm still skeptical and I think your port velocity is going to be too high, but I'm curious to see how your enclosure works out! Keep up the good work with the pictures. we will see, not really worried about it, if it flops then ill plug the ports and 4th it.
April 3, 201510 yr 6 18s? Jesus how many cubes is your box? My 4 15s will use around 50 cubes when I finish her up.
April 4, 201510 yr Author 6 18s? Jesus how many cubes is your box? My 4 15s will use around 50 cubes when I finish her up.lmao 75 cubes sir.
April 5, 201510 yr Dam thats rediclous for a daily driver. I need da back seats for the rug ratsNice build.
April 18, 201510 yr Author think i found what color im gonna dip the truck progress on other rear sealed section rear port on passenger side knocked out, gonna do aeros in front for easier adjustability sanded smooth port plug kreg jigged ready for install glued screwed and bondoed sealed back up moving along i could get used to this(;
April 18, 201510 yr Author finals cuts made on baffle aw shit strated filling in the holes time to foam this roof up solid more on all that above later, deadener is coming out and roof is gonna get smoothed and painted with the rest of the inside of the wall so it all appears to be one piece
April 18, 201510 yr Author time for some new frame grounds yuuckkkkkknew 3/0 welding cable grounds much better, painted over, hear shrunk, etc... main runs to the rear, 2 runs of 4/0 welding positive, 1 run of 4/0 negative under hood bamain runs to the rear, 2 runs of 4/0 welding positive, 1 run of 4/0 negative
April 18, 201510 yr Author plexiglass drilled out ready to install interior of the sealed sections getting glassed up filling the last gap where the rear port was goonna be all of them back from paint now. theyre gorgeous building up the last two subs, **** ghetto engineering uh oh... time for loud doors? i think so
April 18, 201510 yr Wait, so no more 6th? I was actually quite interested in seeing that pan out. Every time I turn around everyone is building what they call a 4th order lately, there are so few 6th orders that are successful it's eye opening when I see one it peaks my interests.
April 18, 201510 yr Author off to paint they go stripper pole going out for paint reconable tweets ftw, these are getting painted too, bullets left machined, edges left black, horn painted purple 10s out of the box lotta weight bruh adding a roof onto my shell extension, 3/4 "spacer" if you will on each side on top of the rear sealed sections with 2x4s on top to give me something to screw too and of course make it very thick. now it will be flush with the front of the enclosure once i stick a piece of 3/4 up there few more 2x4s to go
April 18, 201510 yr Author Wait, so no more 6th? I was actually quite interested in seeing that pan out. Every time I turn around everyone is building what they call a 4th order lately, there are so few 6th orders that are successful it's eye opening when I see one it peaks my interests. yes its still gonna be a 6th but here in a few weeks when i nut up and spend the $240 on the aeros im gonna need lol
April 18, 201510 yr Author slightly out of order, sealing up the rear sealed chambers before the 2x4s bracing baskets for the last 2 18s i got were 3" coil opening so i got to have alot of fun widening them to the correct diameter lol and drill new holes SMH prepped when i did the grounds under neath, all the old runs came up through here so there was about 5 extra 5/8" holes in the floor so i sealed them up with some pl8x and 3/4 birch sealed up 3/0 welding frame grounds and Knu Rca's ready to go
April 18, 201510 yr Author Dam thats rediclous for a daily driver. I need da back seats for the rug ratsNice build.eh fuck it. right? lol kids are in my distant future, im 21 so im living for the moment.
April 18, 201510 yr Wait, so no more 6th? I was actually quite interested in seeing that pan out. Every time I turn around everyone is building what they call a 4th order lately, there are so few 6th orders that are successful it's eye opening when I see one it peaks my interests. yes its still gonna be a 6th but here in a few weeks when i nut up and spend the $240 on the aeros im gonna need lol Good deal! I know I put off my entire build because I needed the adjustability of Bill Lolo's pyschoports. Now I still have the enclosure, but I sold the subs. Now you really got my interest! lol Keep up the good work.
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.