Posted May 4, 20178 yr Looking for some help with an enclosure for a 15" xcon... I could go sealed but I need the help of you gurus to figure out how to get it ported Currently I have the Xcon in an enclosure that is roughly: 32" w x 17" h x 15" deep ... I have a 2016 Mazda3 hatch. My max dimensions for depth is 19.5" but that's only keeping a flat wall, I'm wondering what can be done about having the enclosure sort of follow the back of seats at the present angle. Like so but less aggressive of an angle obviously...: So my hopes for the enclosure are: 1. Ported - 6" PSP port 2. Max dimesnions would be W-26" H-20" D1(top side)-19" D2(bottom side)- about 22" 3. frequency would be lowest I can get with a 6" port Specs for the Xcon: Photos of hatch space:
May 4, 20178 yr 4 cuft @ 30.5 Hz w=24.75 h= 19 d1 (top side)= 19 d2 (bottom side)= 22 port length = 17'' flair to flair , (full length of 6'' psp port). sub up, port to side, add extra baffle on the top Edited May 4, 20178 yr by StreetLegal
May 5, 20178 yr Author How did this just happen? Why does my math suck? And thank you ... 2 hours ago, StreetLegal said: 4 cuft @ 30.5 Hz w=24.75 h= 19 d1 (top side)= 19 d2 (bottom side)= 22 port length = 17'' flair to flair , (full length of 6'' psp port). sub up, port to side, add extra baffle on the top
May 5, 20178 yr Haha no problem mann, have some time to kill lol if I left out any dimension let me know.
May 5, 20178 yr Author Thanks again... Thinking I'll be going port to driver side.... 1 hour ago, StreetLegal said: Port can go on either side.
May 5, 20178 yr Author Although If I just make it flat and a little less deep, I can flip it to either side...
.jpg.ea8ac89a2ec7f49de0b9e4027c74f515.thumb.jpg.dc61d2e06476e189721027d6a6eb6027.jpg)
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.