for real.

Where did you get them LEDs? I would like one in my car kek.

Those are extremely bright for as small as they are.

thanks! got them at plasmaled.com! they are the 009 series..

time to build a spot to mount these things.....

after that set-up, i added another layer (not shown) and started to get my sand on...

its taking shape, tomorrow i will cut the LED holes out and finish sanding - then its time to wrap it and call it done!

Its tomorrow

When finished, I want you to see if you can weigh this thing.

we went through that story of the preproduction amp on your site and what happened to it. but when we cranked it up for the 5 minutes or so those 8 15"s pounded pretty damn hard, and coming from RF they have the 360.2 in there and it sounded real clean. i got small shirt trick standing in the door jamb

the volt meter hardly moved with the truck at idle on that little electrical system. its an amp that doesnt need overkill

I heard those were eight 18s not 15s.

after that set-up, i added another layer (not shown) and started to get my sand on...

its taking shape, tomorrow i will cut the LED holes out and finish sanding - then its time to wrap it and call it done!

Meade916 you're my Hero. every time i see your work it keeps me motivated.>>> http://www.soundsolutionsaudio.com/forum/i...showtopic=23101

more layers, a few more pics. Its ready to wrap and install the LED's...tomorrow (or saturday)

Two of my favorite cans!

The big holes house the LED's, the little holes are how i am going to attach this back on the console. That cupholder door USED to have to open to get to those screws, now i have to go thru everything since its permanently enclosed now.

very nice place to mount them. nice work also

Gangsta!!

chit looks good Meade...

thanks!!! , i have 6 more of these LED's on the way for other "strategic" parts too

Badass Steve, I want to hear it! I might have to take a road trip next summer

its getting closer to finished every day :bigclap:

When finished, I want you to see if you can weigh this thing.

I, too, would like to see you put this baby on a scale when it's all said and done.

damn that looks awesome!

spent the day O'scoping they system and turning screws and gain knobs, fine tuning the 3sixty.2. Im happy to report NO clipping The alpine doesnt clip at all at full power so thats also good After tweaking gains for half the day, (no Eq'ing yet), i got started on some more LED's.

sucks to have to pull it apart but at least i CAN when needed to get to the critical parts It was designed for easy access to everything -

Soldered and heat shrunk.

nice led's. the blue looks good with all of it

that looks WOW!!!..thats i could think of right now steve..nice work once again bro!

That is insane

Looks amazing.

Keep up the great work Steve.