DC Power Engineering

Do you guys make hi-output alternators for 07 Suzuki Reno? If so how much would the cost be? and what size would you recommend. Im only running two amps kicker zx1000.1 (100amp fuse) and a Eclipse EA4200 (30amp fuse). Thanks

Does DC Power Engineering have a ho alt for my 2008 Hyundai Elantra? Thanks

*EDIT* Found the alternator on your website, will the 180 amp HP work my setup or will I need the 320? My planned setup will be running 1 sundown SAZ-1500d and 1 sax-50.4... Are these the same alternators as the one offered for the 02-06 4cyl Camry? Thanks

I have a Jeep Cherokee that the A/C compressor has locked up on. So I have decided to put an alternator in its place. What do you have that will put out around 15v's and close to 275 amps? Also do you have the adapter to the alternator in that spot?

Hey guys, So here's pictures of stock harness and new one: stock new The blue wire goes to positive stud on alt, correct? I know where the black positive cable from stock wiring goes to positive stud on alt (from stock pic) But where/does the white wire, and the two red wires go to the old wiring? In the pic you see the red wire with ring terminal on left, but on the right theres another red wire about 3-4" long with no ring terminal, just dangling (is this one used?) Thanks

ok i have a 2002 dodge dakota 3.9L and i noticed that they just added alts for my truck (very happy about that by the way!) anyways, im currently running an AQ1200D, i did the "big 3" and i have a kinteic HC2000 under the hood, now in the spring i plan on buying another 1200D and strapping them, and as it is, with the headlights on i get voltage drops to the low 13's. the 2 alts im looking at are https://www.dcpowerinc.com/13874-180-hp.html and https://www.dcpowerinc.com/13874-170-oem.html now i dont see much difference in the 2 except a 10 amp difference and a 60 dollar difference (and the cheaper one puts out 10 more amps) so my question is, which should i get, and wou…

Wondering if you guys @ DC Power have a kit for my 1996 Impala SS. With 350 LT1.

Wondering how much it would cost to get one of these shipped to Houston, thanks!

Hey guys. Have a specific request for this vehicle as it isnt on the site. I will be using around 3k rms and would like as much idle output as possible. Thanks dudes.

So i talked to Kyle and he said I would be plenty satisfied with a 250amp alt for my jeep. Im putting in 2 18s NS v2 and a single 4500. And eventually upgrading doors speakers. My question is will i just replace my oem alt with this one or will i need a dual bracket?

I got my new alternator from you guys, but i didn't get no paperwork.. My stock alt has two post on the back along with the harness.. the 320amp i got only have 1 post, along with a harness and a skinny blue wire. How do i install? What is the post on the back POS or NEG? What is the blue wire for? Why didn't i get any paperwork? ..never done this before. - i called and left a message.

We've had a ton of inquiries for new models of our XP series alternators recently, and we're just finishing up our most recent production run of housings.. We have the following new models coming out now.. I'll post up pics of the alts as soon as the frames get back from the anodizer and I get production versions built.. XP series alternator for Most Dodge/Chrysler/Jeep This is what we call a 6/12 straddle or "J" mount.. This fits pretty much everything Dodge/Chrysler/Jeep produced from '88-'02 That wasn't a 4.7V8 XP series alternator for Mazda/Mitsubishi/Subaru This is another 6/12 straddle or "J" mount, and is almost a universal Japanese mount alternator, literall…

Since I am the one who heads up product development here at DC Power, I would like to get some input from the members here about products you guys are looking for that we may/may not already have.. I think we are more known as a "high priced" manufacturer because that's what our specialty is, building the biggest, baddest, meanest alternators you can get.. However, we also have a lot of other things we can do, we just dont get asked alot for them. Not only that, I think most people automatically assume that "I need a 200 amp alternator" when they dont. My goal is to get a lot of input from the community here about what is MOST important to you for charging system needs. O…

Hey probally just spitting in the wind with this question but figured yall could have some idea or thought. Im picking up a 1992 volvo 240 wagon and im a big power hungry type person and need a nice beefy alt that can perform well and pump over 100amps of charging power My problem is YOU CANT FIND ANY alt's over 100AMPS of power that fit onto the mounting spot, any type of alt anybody knows of that would fit or someone that could custom make something to fit my application. Gave up on the sedan and just put a bosch 100amp in it, worked ok just enough amperage for my needs atm. Would really appreciate your input on this foreign car issue.

I got the alternator and installed it in my lumina (was installed for less then a week), the car broke down and it's been sitting in my closet. I know you guys offer case swaps, but I know I'll need a higher output alternator for my 2011 Ford V6 Mustang, Does DC offer either exchange + the difference between the two alternators? I believe it is a 260SP line (I'm not 100% sure), The alternator it's self it was for a 1996 Chevorlet Lumina v6.

Hey there! I hear alot of people requesting alternators made for their vehicles that aren't specifically up on your website!! So i'm here to do the same. Now i'll only really get a DC if i can find a buyer for my Iraggi. But just out of curiousity and possibly future installment, do you guys have alternators available for my vehicle or would they have to be custom made? and of course, the price!!! Thanks for your time!

You heard it right guys, this is a WEB ONLY deal and we have had great success with our OEM 190 series. I would highly suggest you guys checking it out. https://www.dcpowerinc.com/dual-alternator-kits/gm/1999-2010-chevy-5-3-5-7-6-0-6-2-dual-alternator-bracket-with-190-amp-oem-series-alternator.html

I have a 2001 impala and need a alternator. I wanted one that was atleast over 230 amps so what do you guys have? Also right now im just running one btl but later down the road i will be running 2 or 3 btl and so if i get a big alternator now it wont mess anything up right? Also how much would it cost?

Starting tomorrow I will be out of the country until the following wednesday. Just letting you guys know! Rob may pop in from time to time but if you guys need anything at all call us at 888-441-0144. Thanks!

Can't seem to find anyone who will build me an alt for my car. I am looking for max output at idle. I would prefer around 150-200 at idle (800 engine RPM) if possible. If you guys at DC can help me then please let me know. Thanks, Colby Webre

Are you able to do any alts for vehicles not listed on ur website? A 2000 Pontiac grand am 3.4 engine for example?

I was wondering if you make a dual kit for this car. I have the 3.4l. Iraggi did it and I was going to order from him, but he's MIA. So I know it's possible. Let me know what you got or what you think about this.

Help me welcome DC! DC and SSA will be partnering up in hosting this section, SSA is also now an authorized dealer for DC Power Engineering. We will update the shop shortly. Welcome to SSA!

Currently you guys(DC Power) offer 2 models for the 2003 Toyota Camry 4 cyl. variant... Question 1: Are there any other models that have not been applied to your site? Irragi and Ohio have many different version of similar output ranges and I was curious if maybe you offered more? Question 2: I did the comparison of the 2 different models and I was thrown off by something: So why is the output at idle higher on the lower end model? Seems like that model is working closer to max than the other and potentially "not last as long" or "do more work constantly"? Question 3: (might be on your site already) What is the lead time or processing time, for example if I ordered …

i just wanted to ask if you guys sell alternators for subarus.