Mechman High Output Alternators

Looking to see what options I have for a 2013 honda accord sport 2.4L.

Hi, I recently bought a 270 XP for a Golf tdi, direct from Mechman. It was for a friend of mine. He runs 2 big amps : an MTX te4000 and a Lanzar opti 4x250, with 4 Optima blue batts. The problem is the voltage : too high. It stays above 15v whatever he tries, giving him much problem with the car. After some electronic checkings, some error messages told him : too much voltage ! The alternator is internally regulated, so he can't just buy an external regulator. What can he do ? Now he had to disconnect the alt to drive safely, but he can't do that for too long. I think he is ok to send the alt back to Mechman because he can't do nothing with it. He is, of course, really d…

For a Honda Prelude 1993. Automatic engine. Please let me know watts your lowest cost effective alternator for this application.

My mechman 260 is getting blazingly hot, is this normal? Thinking its a ground issue, I have it attached to a battery which is attached to the motor. Any ideas?

i was looking into upgrading my system with a H.O. alternater. but not sure if mechman makes any. i have a 2006 monte SS

Hey I was wondering what alternator options you guys have available for my 4cyl 2003 Camry. Are they in-stock or need to be built? Versions available and pricing? Will this belt work with it??? gates 7PK1930 Thanks in advance...

What do you have for a 2004 Toyota Corolla ? and how big is it, Ohio Gen told me that couldn't do one more than like 160 or something.

I've been having issues with the PCM messing with my voltage, so I spoke with Josh Over at mechman and he told me to see what happens when I disconnect it.. this is what happens.. this is something he has NEVER seen. As I say in the video it is not a self exciting alternator. It is a brand new 320a alt.

I posted this elsewhere and was told by many that Mechman is the place that I would find the best answer. I typically would not ask another company for advice concernering some company's product but since I can't get an an answer from them... why not... I have some questions concerning a high output alternator and figured there's no better place on the internet to find a good answer to my problem. I own a 2002 Tahoe, and am in the process of trying to set up dual alternators. The alternator I ended up with is manufactured by Mean Green Industries. I know nothing about this alternator. The website tells me very little useful information about it. When I attempt to contac…

I'm really thinking about ordering one this weekend.. It'd be nice to see some pics and hear some opinions on yours so far... I think I'm going to get the 250 amp G Series... This is for a Daily driver, not competitions...

Hi there.. I just wanted to know will i have to change my alternator belt? Because i heard the pulley on the high output alternator is smaller so it moves fast nd since then you need a smaller belt then your orignal one? Thanks

Attention 2013 - Present Jeep Wrangler Owners!! Get the voltage you deserve with our 240A Natural Finish Alternator, on sale now for just $399!! https://www.mechman.com/240-amp-alternator-for-3-6l-jeep-wrangler-pentastar-2013-2017/

Just listed our 10dn/10si/12si replacement unit for your early GM cars. It's available in 150a and 220a as a bolt-in, plug-in solution for your rides. They have excellent cooling by using one of our hybrid 43g units. The solid copper rectifier, precision balanced rotor, premium NTN bearings and custom wound stator will insure years of durable performance and the 2-year warranty is there to back it up. Adjustable voltage is available too! 150a- $249 220a- $349 If you don't see your application on the website email me- [email protected]. We can build something for all of your vintage GM alternators. -Eric.

I have a 270a Mechman that I purchased this spring. Not a month after I bought it it had charging issues and was repaired under warranty. Well now I have another problem and not sure where the problem is. My system is NOT installed right now and hasn't been since the repair of this alt. I have two 3yr old Redtops under the hood now. The batteries rest at 12.6 with the truck off and hold that way. When the truck truck is at idle my voltage is at 12.9. As all. As I give throttle is goes to 13.6 but doesn't go higher. When I come to a red light it's back at 12.8-13.0. Again No radio at all. I'm thinking it has to be the alt again but I have two new xs3400's that could go in …

Voltage. Better than drugs. Power Your Passion. http://www.Mechman.com

Mechman now has Billet Aluminum Overdrive Pulleys! 48mm, 4, 5, 6 and 9 rib available. Natural finish, CNC machined, $49 + shipping. Email [email protected] for details.

Want a deal on wiring for your ride? We are overstocked and have a bunch of partial spools so we are going to offer a great deal on our cable while supplies last. • 4ga CCA- .70/ft • 4ga copper- 1.40/ft • 8ga CCA- .40/ft • 12ga speaker wire- .50/ft • 16ga speaker wire- .30/ft We can stuff flat rate boxes with this wire to save you on shipping too!

I have a batt bank, 2 hc2400's and a hc1800 Bought a 200 amp power bastard alt that is a direct fit for my 02 taurus It spiked to 16+ volts when i hit the gas lights got real bright then the voltage regulator kicked in and it settled back to 14.5 v. Sent ot back they put in a new regulator same problem. Bought a HO rebuild kit for my stock alt, same problem. Went to a local mechanic and he said there is no way to solve the slow regulator issue I'll buy a mechman if they can solve this issue. I also need a direct fit due to space restraints Why is my HO alt having these issues.

Power Your Passion. http://www.Mechman.com

Need a dual alt bracket for a 5.7L in a 99 Chevy Suburban. Factory alt is on passenge side.

well my question is if my car is pcm controlled is it possible to perhaps run my stock alt on my electrical for my car nd have my 2nd alt from you(mechman270 unit) and run it with just my car audio equipment? and the pcm will not controll the output at all?

Does mechman make a dual alt kit for a 2001 Tahoe 5.3L? What are my options?

Who has an E46? Who wants a high-output alternator? Our engineer and I just finished up the E46 Denso kit and it fits like factory! 220a, 270a and 320a available, easy installation with basic tools and uses the factory belt. NO cutting, grinding or other BS required on your BMW to install this unit. Want a price? Email me- [email protected]

Do you own an Ecotec powered vehicle? Do you need a high output alternator? Mechman is now offering Ecotec alternators! These Denso Hairpin alternators are direct bolt-in, plug-in installation and are 100% OEM compatible to work with all of your vehicles electronics. Available in 220a, 250a, 270a and 300a+ configurations, these hairpin units will give you the power you are looking for. 2-tier rectifiers, precision balanced rotors, premium NTN bearings, high output stators, 8mm output studs and our 2-year warranty make these a great performer with a great price. Call or email- (865)522-6166 extension 201 [email protected] I'm here Monday through Friday from 8:30am to 5:3…