SoundQubed

Anyone own a set of both? The Bassbudz are $50 and the Soundqubed are $25.. I think I will have to get a set of both and do a comparison.. Any one have any thoughts on the subject?

So I am thinking about purchasing the super tweets and pro 6.5's but am wondering what people are using for crossovers with these? Do you have anything that can be purchased from you to use for this? Not sure I want to go the active crossover route.

So I just made my purchase for a HDS212 and Q1-750. Wanted to get some input on how to properly tune it. I don't have any meters, dd1s, anything like that, but I may be able to borrow one. But anyways, what is the process of tuning the Q1-750? Also, this will be my first system with a bass knob, so I'd appreciate help on tuning with that. Thanks ahead of time

SoundQubed should invest in this sticker and give it away with the HDS200 and HDS300 series subwoofers:

Hi there, Was just looking for some info./recommendation. Will the HDS300 series 15 (dual 2 ohm coil) work well in a 4 cubic foot ported enclosure tuned to 33 hz. It has 66 square inches of port surface area. And will be getting 850 watts of power from a PPI sedona 850 amp.

This year we are going to have a load of sales going on! Black Friday: Starts at Midnight November 28th (Black Friday) and ends Midnight November 29th. Cyber Monday: Starts Midnight September 1st and ends Midnight September 2nd. Everything (excluding glue, recones, and misc parts) will be 10% off site wide. We will also be discounting our Woofer Bundles. Friday Trunk Busters 25% off Q1-3500 20% off Q1-750 30% off Earbuds Monday Trunk Busters 20% off Q1-1200 20% off Q1-2200 30% off Earbuds Also, Make sure to read over our shipping policy! We offer free shipping and signature ship for $5.00.

Would this be a good choice for a daily driver? I listen to mostly rock music. I know there are better choices but this is in my budget range.

Okay guys, I thought I'd share my most recent build with yall. I work until 5:00 P.M. so please excuse the low light pictures. Most of the work was done at night. Ask me questions so I can make this a more complete build log! I wanted to put this here for SoundQubed, but if a mod thinks it needs to be moved to the build log section, then feel free to move it. Equipment: Two HDS215s, JBL GTO 1400.1 amplifier (1500w RMS @ 2 ohms), XS Power D3100 battery, Alpine CDE-123 head unit, Sky high 10ga wire for subs and 1/0 for power and ground. Stock alternator, and I still haven't done the big 3... I need to get around to that.. But my light dimming isn't too bad with this batte…

Has anyone heard anything about when these are being shipped? i ordered my subs March 13th and were suppose to be shipped yesterday but yet my order still says awaiting shipping. can anyone please update me on what's goin on? i have a huge local car show that happens once a year this Friday and really needing my subs for it. please someone let me know what's goin on

To make a long story short, the current HDC 12s that soundqubed is making have the hds300 basket. I bought one new and it did not come with the pictured basket on the website. Not all the way sure how I feel about it yet.

I REALLY want to try some of the subs, but can't fit the mounting depth of any of them in my crew cab f250... I refuse to go the flat, shallow sub route. Any chance that you guys will be making a sub that's more in the 5" depth range? Pretty please??

What's the rumor on the HDCX I keep hearing about? Wouldn't mind some info and release date as I'm window shopping now for some 8's most likely for my best scenario within my application. SQ is about an hour drive for me so it would be cool to go swing by to pick some up if I decide that route!

I'm trying to copy/paste my build log from another site, but I can't manage to get paste to work... I've tried ctrl+v, as well as the button. Nothing seems to work. Any suggestions?

Just ordered two hds3 12's and I'm not a box builder paid a local shop to build my last one but dnt want to pay that again wanting to do it myself but ineed help figuring out all the cuts n lengths and port and all that I'm putting it in a 03 Chevy blazer 4 door and love the low low bass. also wanting subs to face the roof and port to face the hatch. if anyone can help me figure out how to do this to make the best box for my subs and for bass it'd be greatly appreciated and or if u can send me to someone or a site that will help me come up with a blueprint on how to do this build b so awesome thank u hope to hear from yall thank u

Hey everyone, this thread is me clearing up a few questions I have about HDC3's and HDC4's. These are the two subs in question. (so it's easy to reference ) HDC3: http://www.soundqubed.com/HDC3118-Copper-Coil-Subwoofer_p_25.html HDC4: http://www.soundqubed.com/HDC418-D1-A-_p_137.html We are talking about 18" only Whats the story behind the high Fs of the HDC'4? Was this a non broken in woofer or something? The suspension is that stiff? (equivalent HDC3 is 9hrz lower IIRC) Between the HDC3's copper coil & the HDC4's aluminum …

What bolts are needed to secure the basket to the motor? Thread, pitch, grade....

what is the cubic foot needed per sub??? im going with these in a slot ported box tuned to 34hz port area is 256in will this work?

Ordered the HDS310 on eBay from Soundqubed. Tried messaging them and no one replies. How long has it taken you guys you usually get your items after ordering from them on their website or eBay?

HDS208 - The Baddest 8" woofer you'll ever encounter (Pricing and Availability to be announced)The HDS208, your cost efficient 8" woofer designed with familiar SoundQubed reliability and performance. Our HDS200 subs have been very successful and have became the blueprint for the HDS208 design. This woofer is a beast at 600W RMS, a cast frame, 2.5" copper coil and back plate venting to coil it in the tightest situations. The high efficiency starts with a strong 2.5" voice coil powered by a motor structure patterned after the energy model of the HDS2.5 structure. We like subs that can pound with authority and the HDS's play just like their bigger brothers. High temperature…

Ok, I recently made the jump to buy some new gear to replace my old dual 15" old school Kicker Infuse subs. Mainly due to I needed my trunk back as the box took up the ENTIRE trunk of my 2008 Focus SE. I went ahead trying to budget and got a good deal on a Power Acoustik RZ1-1500D. Its stable at 900RMS at 2ohm which the single sub will be wired up as. Now, I know it states 600 RMS & 1200 watt burst for the HDS woofer. My main concern is, do I run a large risk of blowing the speaker using this amp? The box it will be going in is a single 12" ported enclosure: Belva Sub Box 1SV12G (Gray) with a air volume of 1.8 Cubic Ft. tuned to 36hz. Mainly due to cost, size, an…

I see on the site listings for ported. Any recommendations on sealed?

I don't have to tools required to build a box. I'm looking around on eBay for a decent box for the HDS310 and the best thing I can really find is this... http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=390824040731&ssPageName=ADME:X:RTQ:US:1123 I messaged the seller, he said it's tuned @ 36hz. It's stated it's 1.5cf and made with 3/4 MDF. On the "Box Sizes and Tuning" page, it states 1.25cf or 1.5 for the 10. Would this box be fine? I'm not sure on the port length/width.

So I just finished my recone on my HDC3-15 copper D1 and could not figure out which dust cap to use. So I started looking at what I could use that would make it a little different from everyone else. So hre is how it went: First thought Second thought And the final, which is how I believe Sounqubed should be selling/shipping the subwoofers I took their 8 inch carbon fiber cap and trimmed it down to 6 inches to fit in the original cap area and "I like it alot".

I have 2 12inch HDC 3.0 and need to know what i should set my AQ 2200 amp to for the settings.

I currently have two HDS3.1 10s.. My baby steps are going to build 4th order wall.. I have chevy sonic 2015 hatchback.. The 6 subs will be inverted inside port wall.. I will be working on the back seat out for measuring spaces.. Depends on my taste build.. It probably will be done by a yr or two.. Anybody can dream it even low on budget.. First is get a mids and high front stage.. Of course it's going all soundqubed products.. The amp will be 4500 rms.. And three batteries in back.. I will upload into photobucks.