Test 1, 2, 3...

My guess is 896

pretty sweet, but when you scroll over a few of the DP pics, it says "ICON 12"....lol

FAIL

Power handling is install deL and throw 1200 RMS at it at 2 Ohms. Ported box with my capacitor and in the summer going to do the Big 3 upgrade just want it to be noticeably louder than my current 2 12" MTX Jackhammers that are getting 250 RMS each. In a sealed box The BL is the right choice for that, maybe a good agm battery instead of the cap. Do the big 3 as soon as you can. well im looking at running it with the cap and big 3 ASAP,, and when i have a little more spare money im gonna do the yellow top battery instead of the cap

Does the subs sensitivty makes any difference in output. Example Fi Bl18 spl/94.1 AQ hdc3 18 spl/89.8 btw the amp underated 1200-1575ms

Welcome to noobdom. Am I writing in a tongue spoken on another planet? If you can't rephrase your comments in a commonly understood manner, your question is answered. BTW, what's stopping you from doing just that? Let me guess; your points are silly at best. Yet, somehow, you feel the need to keep posting, even though this is seemingly a lame attempt to try to get a piece of your own. Ruts-a-ruck. Again with the strawman argument? Clearly, the record says otherwise, so why spin the facts and not act honestly? <SIGH> At the risk of stating the brutally obvious, posting revolves around communication. As you're unwilling to make your comments easily understood, I'm…

Just got my 15" BL two days ago "THNX Scott!" Just wondering your guys opinion on this box design... does everything checkout? I'm iffy about the 3.8ft^3 should i cut it back to 3.5^3 =http://www.subwoofertools.com/forum/ported-box.asp?Ew=33.5&Eh=16.5&Dia=9&Xmax=21&Vd=.18&NumW=1&Vb=3.8&Fb=33&Qts=.40&Vas=81.6&Fs=34.5&CE=1.5 ^Designed by Fargof @ Ca.com

so basically i set the sub sonic to 33 Hz since that is what im planning on tuning the box to. and it will make it so the sub doesn't hit frequencies that will hurt it. right?

But at least the generic response could be that they were supposed to read it.

I like this newb guide, good job Scott. Is it possible to direct the new members to the post after registering ? Or even suggesting them to read ? Not all would read it, but it would get a bit more attention IMO.

ok so if i go with the saz 1500 should i get dual 1 ohm or dual 2 ohm

If the stuff on SSA's store is out of your price range, check out sonicelectronix.com they have a lot of the usual brand name stuff for pretty cheap. Not sure what your electrical is like or if you are planning to go over the 600w recommended rating, but last time I checked they had some older model Kicker 500w amps for 199 bucks. I was gonna grab one til I found a refurb sae1000d for 230 bucks, so obviously I went with the sundown.

thanks alpine cda9886 infinity 5.25 four jl audio 6x9s alpine t320 treo rsx1900 4 jl audio 12w1v3 13.5 can you say bass

rockford fosgates new line of amps for 2010 have something called constant power which means they do the same power at 2 ohms as 1 ohm.. theres alot more to it but you get what i mean.

this ones becoming a real nail bitter now.

Spam

If I trade for an amp I need something that is at least 2500 watts rms. This Audiopipe should be an easy fix, but I just dont have the time or money to do it.

Some people enjoy them, have not seen any done yet with the Warden.

sealed enclosure guessing? after just looking at a pic of your engine the alternator looks pretty easy to get to. So it should be relatively easy. just these three steps alternator to positive side on battery engine block to neg and neg to chassis

.

lookin great for a '89 tuned in

Only part of the roof that flexes is the sunroof, thas it

m

Its 4.5" LENGTH after the corner of the port. Not width. It's stilll 5" wide. Nice design! Not talking about the length that is given. 15.25" port wall + .75" for the second wall = 16" 20.5" of internal depth - 16" = 4.5" away from the rear wall. Not to mention if it was 5" from the back it would be tuned to 34hz