General Audio

I wanted to know if anyone else has had this problem yet. Im working on a new build in a blazer everything is going well so far. Im just trying to get the last part of my electrical straight before I build the enclosure. I have a singer 350a alt and I decided to add a mechman vcm. Everything has been hooked up properly but Im not getting any power to the vcm. I checked over wires and made sure I was getting voltage and everything checks out fine. I happened to notice that the plug which hooks up to the alt has one red wire. The plug happens to have 4 prongs. I wanted to know if that could be the reason for things not working as they should.

Dear SSA. Why am I getting Donkey Punch Vapor spam from you!!? Super unethical to harvest the e-mail database to spam out slightly offensive advertising for the new company you are starting -Jamie M.

Hi guys this post may be long and I apologize in advance. First off I am by no means wealthy in any sort of the word. I currently own a 97 Buick LeSabre (240,000mi on it) so a new car will soon be required. I want my car to suit my audio setup more that the other way around. I want to keep the following attributes in play with the decision. 1.space / big trunk (for multiple 15's or more) 2.interior that is "easier" to modify. I would be willing to tear rear seats out to mount amps and batteries there. 3. Accessabily so it is not such a pain to run multiply runs of 1/0 cable from front to rear. (Not that big a deal) 4. "Acoustics" as is like some paper thin doors that r…

It will actually be a pair of subs. Single cab pick up truck with limited space behind the seat. Looking for a nice little sub that can get loud. Power will come from the sub channel of my GS Redline 3 channel amp. BS rated at 1,000 watts for the sub channel into one ohm. It is currently pushing a pair of 12" IA Lethal Injections quite nicely ran at 2 ohms, so any of the subs on this list will work. Alpine Type R $120 Arc 8V3 $150 Image Dynamics ID8 $100 Incriminator I Series $95 JBL GTO $80 Memphis $120 Dayton HF $105 Dayton HO $115 I am ok with the prices of all these subs. Any pair of these can be wired to show my amp either 2 or 1 ohm, I am not too worried with the …

So i just bought 2 Stinger voltage meters for my XS batteries to keep tabs on the volts and i am hoping to mount them on the side of the dash in my ford ranger. i dont have the tools or skills yet to do a whole fiberglass mold so i will be using a dremel to cut out 2 square holes to flush mount the 2 meters. the system i am getting will be hitting at least 140db so i need to figure out what adhesive (or whatever else i can use) to keep the meters stuck to the inside of the dash panel without having to use fillers. anybody got any advice how to keep these things in place?

Hey guys, I've decided to run with the Zv4 on my Sundown SAZ-2000D, can't wait to see the lows this thing hits! Anyways I have my box design, thanks to Joe X! It was originally planned for an X12 but I think it might work for my Zv4. I'll be pushing the full potential of the SAZ-2000D to this sub @ 1 ohm. I have a 270A Mechman alternator coming soon! Anyways here's my box http://imgur.com/a/4avyv 2.5 cubic feet 32hz 39 sq inches of port 15.5 sq inches of port/cubic foot 2 baffles Sub/port is firing upwards The box is already at it's max width and depth that I can go to, but I can always add some height if needed. Just wanna know if that box is ideal for my Zv4 a…

I am looking to build a 4th order or wall in a Tahoe at the c-pillar. I am looking at either 3 or 4 woofers. 1st question, has any one had success with a 4th order build with only 3 subs? 2nd question will a 4th order with 4 subs or wall with 4 woofers work well at the c-pillar?

Hey guys, I have a SAZ-2000D with the X12 I just ordered going in my 2.5 cubic foot box @ 32 hz. I ordered the X12 Dual 2 ohm woofer, but now I'm having thoughts that I should've maybe ordered the Zv4. My fear is that 2k is too much for the X12. Some people mentioned that 2k for a Zv4 is low. I have no plans to upgrade in the near future, I'd like to stick with 2k. It's my daily driver so the sub will see 30 min to 1 hour of play at a time. So did I make the right choice? Will the X12 do fine with that amp? As far as I'm aware the only difference between the two is power handling. Thanks, Dylan

in my last decision problems thread i narrowed down which subs i wanted to get. ultimately, everyone steered me in the DSS direction so i ended with 2 12" DSS Ethos subs in a ported enclosure. now since i dont have many of the tools needed to make a proper sub enclosure atm, i will be buying one. i have 2 specific ones i found on ebay that i think might do the trick. they are: http://www.ebay.com/itm/DUAL-12-Inch-CUSTOM-PORTED-CAR-AUDIO-SUB-WOOFER-ENCLOSURE-4-CU-FT-TUNED-32Hz-/400326247663?pt=US_Speaker_Sub_Enclosures&hash=item5d354dc4ef OR http://www.ebay.com/itm/DUAL-12-Inch-CUSTOM-PORTED-CAR-AUDIO-SUB-WOOFER-ENCLOSURE-5-CU-FT-TUNED-34Hz-/400326264513?pt=US_Sp…

I was looking on the SSA store and was curious about the soundrive cables. They are on the pricey side, my question, are they worth it? Would the sound really improve as they lead you to believe? I've always run twisted pair, currently RF brand, never used coax before. From what I have read, if there isn't an existing noise issue, most any cable will do. Though, the only info I run across seems like it's all just speculation. I just moved my amps around and now my current rca cables are way too long.

I was given the link to this sound deadener and know nothing about it, not saying that's a bad thing because it is not, but I want to know if anyone on here has ever used this brand or know of this brand of deadener from any experience. I am still new at this and want to get the most bang for my buck.....or as much non bang for my buck lol. Let me know, also no bashing, this is an honest question for an honest answer from those who have experienced this brand not a bash the question, or bash the brand thread. Thanks guys. Also if this is some good product, it should save a lot of people some money. (Not a comparison thread) http://www.ebay.com/itm/181430771921?afsrc=1

Okay I've been on these forums and have been looking at a lot of box designers and box designs. I was just curious to find out how much everybody paid for their enclosures/ sub boxes? This is not for the experts who can make their own boxes though your expert quotes are welcomed. This is for those who don't know and are learning how to make enclosures and had to pay lol. Also state if materials were included or not. If possible give the length of time it took. Pics would also be a plus.

here is my system, looking for ways to improve. http://imgur.com/a/phWXW thanks!

Ok so I go to my favorite store locally and research what brands they have. I go in today with my list. I wanted 2 jl audio 10w1v3, hertz dieci 6.5" comps, Kenwood x998, all dash kits and that stuff. So they had a big sale this weekend and were out of 10w1v3's and dieci comps. So I end up buying two jl 10w0v3 and hertz energy esk 165.5. I got all my stuff with tax and head unit and dash kit and interface for my truck. $596 total Kenwood x998 $199 jl audio 10w0v3 $75x2 hertz energy esk 165.5 $150 stinger RCA cables Pac dodge interface $65

I'm looking for a box builder near Oklahoma City, or anywhere in this state! I've attempted to contact McGovney Designs several times, but haven't heard back from him. So, are there any Oklahomans on here that can point me in the right direction for a good builder. Thanks

My girl leased a new Rav4, and looking to make some changes to the factory stereo. Keeping the stock touch screen HU, and want to keep everything as factory looking as possible (drop in speakers, no cutting/custom) in the chance we turn it in at the end. In the title I put "reliable" as, there is a good chance we will buy this at the end of the lease and have it a long time. My back isn't so great, so Id like to do this once, and have it last. I have a couple sets of Crescendo CCX65s that Ive had since 2011. They were only used for about 18-20 months though, (only 4 months amped at 60w). The surrounds are loose, they don't sound as good as they did, there is rust on/aro…

I am curious to see if anyone else runs in to this issue and what might resolve it. I currently run a Pioneer PRS80 after selling one and getting another one i've noticed this same issue with both decks. Once I go pass a certain volume on the deck the bass itself makes the USB seem to disconnect from the unit for a quick second. Cycling through the source options and choosing the USB after turning down the volume lets it play again. I've seen others using this deck in loud systems and I wanted to see if they had the same issue and what they might have done to resolve it. I've swapped USB extensions from the rear of the head unit from 1 to 2 and swapped the USB extension a…

can any one help and give me the equations to calculate the box airspace and tuning on the box ... bcause i want to learn a very accurate way to design boxes like calculating them by pen and paper without using a software. PLEASE HELP

I plan on running a obsidian 12 or 15 in my 94 grand prix 2dr. I have a box meant for 2 12s, 5cuf gross 3.75 net. I can either put the 12 in there. or plug both wholes and cut a hole for the 15 on top. either way the box is temp. anyways I need suggestion on a amp for it. don't want to spend anymore then $200. i don't buy used and i don't buy off of fourms. i don't have a paypal and don't want a paypal.

I just picked up a set of ascendant audio carbon 6.5 and tweeters. They did not come with crossovers. Im switching to a kenwood ddx371 or Pioneer avh4200. Well either one have the crossovers internally to run them or could passive crossovers work and if passive is a better option than the head units listed which crossovers would be best. Thank you for you time as all I have had in the past is coaxial speakers and since ordering two 12" DSS Ethos and a bc3500 I know the rest needs upgraded. Also my mtx te404 amp running high/mid and is extremely limited on setting the crossover. Thank you

Hey guys. This is just a simple question that i seem to confuse myself about, but i would like you guys opinion. I have a 2008 chevy impala and i just bought a 2013 chevy malibu. Im going to go all out with fixing my car up orion subs, rims and all, but which car should i use? Should i use the impala thats already paid for to fix up or should i use my new malibu? Either one i dont use will be my everyday car. Thanks!

Just as the title says looking for a 5k amp, either new or used.

alright guys so I'm getting my alternator within a month, and getting ready tear apart my ride and redo my whole wiring (to get rid on an alternator wine) and to complete my car with all sky high. anyways, wanted to switch my enclosure to birch wood with the fact that it is lighter than mdf and that natural look, looks a whole lot better the way i have my enclosure right now its tuned to 33hz, subs pointing upward port towards the back, love how it sounds (gets down, windshield flexes) on 3 10's so my other option was to make an enclosure and seal my trunk having subs and port pointing forward, never tried it but i have seen some videos of some enclosures ge…

Well I've been away from car audio atleast 2 to 3 years. Not sure what is new if anything. I've got a system right now. A single 10 inch re sx mated to a usamps md1d set to 1ohm so about 1000 watts. I'm actually looking to get rid of it and go more towards sq but know nothing towards that. What's a sq sub? Does it matter on amps? Box wise I know sealed box is best. I've seen these soundqubed and skar are they any good? Don't really have an idea on budget but as always cheaper is better and I'm looking to sell my system probably.

I understand that the amount of decibels you are able to achieve is totally dependant on install. I was wondering if anyone would care to guess or offer a range of where i might be with my setup. I have a 2004 blazer with stock alternator and battery. Should be 105 amp alt... I have 1/0 gauge Kicker wire running to the back. I have done the big 3. I'm waiting on a SQ2200. It will be pushing a HDC3 15 copper D2 at 1ohm in a 3/4" dual baffle mdf box with 5.29 net tuned at 35.79 hertz according to torres. Any guesses? I have a Kenwood ddx371 head unit and a kenwood four channel pushing 4 kenwood 6.5's as of right now. I plan on going SQ with the mids and highs too very soon.…