General Audio

Okay I'm sorry in advance if this topic has been posted about before in this forum but to my credit i did look. I just recieved my sa-12 (dual 4 ohm) from ssa yesterday and i have it on a jx 1000/1 wired to 2 ohms in a ported box thats too small for it (sorry but thats how it is) it sounds good though. I try to avoid hammering on it for too long but I do turn it up to the full 1000 watts for a few seconds at a time. I just want to break it in correctly to avoid blowing it or damaging it because i do exceed the rated power sometimes. How important is "breaking in" a subwoofer in is and if it is important, what is the correct procedure to break it in? Also wh…

ok so my first issue is that i have found a usa company that builts box, for these trucks behind the seat, im going with 8s on this build.... so the options are 3 8s sealed or 2 8s ported im leaning to sealed as he listens to country ,. the issue i am having is finding out how much space is left between the back of the seat and the box.. so i can make sure the subs wont hit... im looking at the sundown SD 8s or the sundown E8v-2 if there is not much space left./ has anyone done an install on a crewcab 2008-2013?

Hi I'm in New Zealand and looking at opening a car audio shop in the future, will mainly focus on car audio retail and installs, in mid range - high end and also car alarms, tining etc. Tossing around names/ ideas of a shop names. Must be professional and not already be used. Any ideas?

I just ordered (2) FI SSD and I'm wondering how big I should go on the box. I want to get the most I can out of the subs. They will be powered by my sundown SAZ 2500d. The biggest dimensions I would like to go are: 44w x 36d x 25h. The 36d gives me about 7 inches from the hatch door. The FI website calls for 3-4 cubes a piece at 33 hz. How big do you think I should go? What tuning frequency? Any help is appreciated.

On youtube there are videos of people running an insane amount of subs in their vehicles for spl applications. Like 15 15's or 6 18's and other crazy numbers of subs. How do they have enough space?? An FI BL 15 for example is recommended to need 3-5 cubic feet of space plus port area. If you run 15 of them together thats 45-75 cubic feet of space plus port area... Do SUV's and vans really have that much space?? Or does the fact that there are so many cones moving so much air make them work the way they do without having the recomended amount of space?? Im just curious if anybody knows how so many subs can be run together and do what they do in the space they are put in.

i just turned my dvc 4ohm 15" obsidians down to 1 ohm would i have to change my amp settings. and does the frequency have anything to do with hitting a low note.cause i have the gain n half way turnt up. along with the frequency

I am going to be installing a factory batter in the trunk. I have three choices for Tray's. I'm not really sure what the difference is or which one I should get. I'm assuming more Amp hours is better. After looking at this stuff I'm actually thinking It might come with a battery? may not be size related. I need some direction. 61 AMP HOUR $40.46 95 AMP HOUR $38.76 72 AMP HOUR $38.76

Guy I work with is having a problem with his.it plays only with the engine not running.I got him rechecking his wiring.was curious to see what you all thought.

So I am going to do an upgrade and was wanting some feedback on how it will do. The upgrade with consist of 2 ssa icons in a a 32hz box which I would like to have a 3.5cu ft after displacement of .16 x 2 from driver with a crescendo bc2000d and will run of 4awg power and ground til I have the money to get a spool of 2 or 0 ga wire. I'm a bit confused on the rms rating of the icons since they only show 1250rms but no info on peek, which I would like to know how far I could push them. Which way would or should I have to face the box so that more of the bass goes to the inside of the car and vibrate the seats to help massage my back after a 10 and a half hour day of work. Th…

So I want to get started on the wall for the dcons, but I realized I probably won't be able to replace panels in the rear with the wall in. So there is my quandary. My right rear quarter panel is rusted all the way through, it's painted over as a temporary cover up but it's still obvious. Should I postpone the wall for months and months for me to replace all the panels that need to be replaced? Or any other ideas? I've also thought about finding another bronco with a good body and doing the modifications I want to make it my style, but this truck as a lot of sentimental value so that would be hard for me.

So here goes. Well I decided one day to tear out the center console in my truck with the intention of putting a new one in there.. Well 3 years later.. still no center console. So thats where it brings me up to pretty much till last weekend. Last week end I got bored and decided to start putting it together again I dug out the mounting brackets and started brain storming that it would be better to build one rather than buy one so i could build it to my specs and add a few things. So to give you an idea what kinda vehicle its going in is a 2002 F250 with the diesel engine. So Im sure as long as I dont go crazy my electrical system will be fine. The only thing I have done t…

i ordered some zcon recones and baskets beginning of may. just trying to get an idea when they would come

I would like to apologize for my previous post here which has not been marked as spam: http://www.soundsolutionsaudio.com/forum/topic/59379-xplicit-audio-new-company/#entry997621 It wasn't my intention to piss anyone off which seems to be the case. I didn't intend on trying to compete with SSA. I didn't even think of that option. So I apologize.

I really hate to even ask, but are there any good subwoofer grille recommendations? I use my trunk pretty often, and even with my current sub I get nervous about things rubbing up against it, or worse. As much as I dont want to cover up the Icon sub I ordered, I also dont want to ruin it, especially since I'll be packing my trunk full with an upcoming road trip. Any grille suggestions?

i just downloaded winisd so i can model my ssd15 in a new enclosure to see the difference between the current 2.5cuft and the new 4cuft bow im planning on building. where do i find the Pe,Le,Z,dia? i have the other numbers off of the fi website but i believe i need these for it to work correctly... i would greatly appreciate any help.

I have to obsidian 15's an two directed 750 amps wit a box tuned to dont know how many hertz. But it has a big.port. In a 93 honda civic dx. Gettin ready to upgrade the.amps. What should i go.with. The subs pushing 1000 to 1500 rms. A pioneer head unit premeir

New to the forums, so forgive me if this is in the wrong thread. I'm about to purchase a GCON for my first build in 5 years, and I want to make sure it's done right. So, I'll be running a single GCON-12 in the trunk of my 2007 Honda Accord SE. I've been looking at the RF Prime R1000-1D Amp, which puts out 1000 RMS @ 2 Ohms. Feel free to suggest a better matched amp, just trying to get something for $250.00 or under. http://www.sonicelec...00-1D.html#tabs First question: Since the GCON-12 is a DVC sub, I would need to get the 4 Ohm model (D4) to get 1000 RMS out of this amp, correct? (I realize this is overpowered for the GCON, but I want to have a little overhead fo…

I've recently installed my sub stage in my 2011 Malibu. 2 sa12's on a saz1500. Box is about 4 cubes tuned low 30's. I'm not blown away by the sound. It's clean and punchy but I'm not getting the blurred vision/nose itching bass I'm looking for. My head unit settings could probably be set a little different but my main concern is the sub orientation. Currently I have subs/port facing rear of vehicle. Everything's bolted down which is why I haven't tried turning it just yet. With the box in the vehicle, back seats folded down and looking in.. Box squeezes in perfect top to bottom. Touches bottom and top. Sides I have maybe 6 inch slots on each side opened up to the rest of…

i was at work last month and what did I find in a junk drawer? A brand new digital converter box. I asked my boss what was the story with it. He told me that he and a coworker had bought it cheap in 2009 to use with a tv in the pharmacy and that I could have it. Win. I'm putting the box in my center console and buy an antenna to mount either on the back deck or near the front glass by the front defroster. anybody used one of theses in a car or RV while moving? I hear reception is crystal when parked and choppy like satellite during a storm while in motion, Thoughts?

Hello all, new here. Wanting to get some opinions on my upcoming box build. Never did an extended cab before. Ok so the sub is a 12" Fi BL on a rockford t1500 bdcp. Now the box I have figured is 3.9 cuft gross and 2.5 after all displacement(I plan on double baffling). Port will be a t-line style. My question is Port up? Or Port Forward? Box dimensions are 39" x 15" x 15" so port will be the same either way at 3" x 13.5". Any and all help is greatly appreciated. Thanks.

Not sure how it fully happened went to work they were working came home they were not. So i checked the 3 30size fuses in my amp they were all good. I chcecked my remote turn on wires good. All wires all plugged into amp correctly I have an Audioque 750amp and the 2 dcon 10". Pleas help, any more info needed just ask! Im looking for a way to test my amp and subs possibly with a multimeter or a 9v battery. Any tricks thanks ugh!!!

scratch that. found an answer to my question

I worked this past weekend. Drove to the track and parked my car on friday afternoon. I went to leave tonight and when I would turn up volume to my normal listening level the red light would come on and my sub would not work. When I parked my car on friday everything was working correctly. Any thoughts why this would happen? We did get some pretty hard rains but I have had no issues with this previously. I have been running this set up since january. I have not had the chance to check voltages yet but any direction to why the sudden change. My current battery is just the standard car battery I purchased from sears in december. Just confused.

Hey guys I was just interested in what DSPs you use the most on your setups? We install a lot of Audison bitONEs and bitTENs. And a much smaller amount of Fosgate 360.3's, Helix P-DSPs, and JBL MS-8's. Just curious and what do you think of them?